#! /usr/bin/env bash

# More info at: https://github.com/elitak/nixos-infect

set -e -o pipefail

makeConf() {
  # Skip everything if main config already present
  [[ -e /etc/nixos/configuration.nix ]] && return 0
  # NB <<"EOF" quotes / $ ` in heredocs, <<EOF does not

  if [[ $PASSWORD == null ]]; then
      export PASSWORD=$(printf $ENCODED_PASSWORD | base64 --decode | jq -Rs .)

  mkdir -p /etc/nixos

  git clone https://git.selfprivacy.org/SelfPrivacy/selfprivacy-nixos-config.git /etc/nixos

  # Prevent grep for sending error code 1 (and halting execution) when no lines are selected : https://www.unix.com/man-page/posix/1P/grep
  local IFS=$'\n'
  for trypath in /root/.ssh/authorized_keys /home/$SUDO_USER/.ssh/authorized_keys $HOME/.ssh/authorized_keys; do
      [[ -r "$trypath" ]] \
      && keys=$(sed -E 's/^.*((ssh|ecdsa)-[^[:space:]]+)[[:space:]]+([^[:space:]]+)([[:space:]]*.*)$/\1 \3\4/' "$trypath") \
      && break
  done
  local network_import=""

  [[ -n "$doNetConf" ]] && network_import="./networking.nix # generated at runtime by nixos-infect"

  if isEFI; then
    bootcfg=$(cat << EOF
  boot.loader.grub = {
    efiSupport = true;
    efiInstallAsRemovable = true;
    device = "nodev";
  };
  fileSystems."/boot" = { device = "$esp"; fsType = "vfat"; };
EOF
)
  else
    bootcfg=$(cat << EOF
  boot.loader.grub.device = "$grubdev";
EOF
)
  fi

  # If you rerun this later, be sure to prune the filesSystems attr
  cat > /etc/nixos/hardware-configuration.nix << EOF
{ modulesPath, ... }:
{
  imports = [ (modulesPath + "/profiles/qemu-guest.nix") ];
$bootcfg
  boot.initrd.kernelModules = [ "nvme" ];
  fileSystems."/" = { device = "$rootfsdev"; fsType = "$rootfstype"; };
}
EOF

  [[ -n "$doNetConf" ]] && makeNetworkingConf || true
}

makeNetworkingConf() {
  # XXX It'd be better if we used procfs for all this...
  local IFS=$'\n'
  eth0_name=$(ip address show | grep '^2:' | awk -F': ' '{print $2}')
  eth0_ip4s=$(ip address show dev "$eth0_name" | grep 'inet ' | sed -r 's|.*inet ([0-9.]+)/([0-9]+).*|{ address="\1"; prefixLength=\2; }|')
  eth0_ip6s=$(ip address show dev "$eth0_name" | grep 'inet6 ' | sed -r 's|.*inet6 ([0-9a-f:]+)/([0-9]+).*|{ address="\1"; prefixLength=\2; }|' || '')
  gateway=$(ip route show dev "$eth0_name" | grep default | sed -r 's|default via ([0-9.]+).*|\1|')
  gateway6=$(ip -6 route show dev "$eth0_name" | grep default | sed -r 's|default via ([0-9a-f:]+).*|\1|' || true)
  ether0=$(ip address show dev "$eth0_name" | grep link/ether | sed -r 's|.*link/ether ([0-9a-f:]+) .*|\1|')

  eth1_name=$(ip address show | grep '^3:' | awk -F': ' '{print $2}')||true
  if [ -n "$eth1_name" ];then
    eth1_ip4s=$(ip address show dev "$eth1_name" | grep 'inet ' | sed -r 's|.*inet ([0-9.]+)/([0-9]+).*|{ address="\1"; prefixLength=\2; }|')
    eth1_ip6s=$(ip address show dev "$eth1_name" | grep 'inet6 ' | sed -r 's|.*inet6 ([0-9a-f:]+)/([0-9]+).*|{ address="\1"; prefixLength=\2; }|' || '')
    ether1=$(ip address show dev "$eth1_name" | grep link/ether | sed -r 's|.*link/ether ([0-9a-f:]+) .*|\1|')
    interfaces1=<< EOF
      $eth1_name = {
        ipv4.addresses = [$(for a in "${eth1_ip4s[@]}"; do echo -n "
          $a"; done)
        ];
        ipv6.addresses = [$(for a in "${eth1_ip6s[@]}"; do echo -n "
          $a"; done)
        ];
EOF
    extraRules1="ATTR{address}==\"${ether1}\", NAME=\"${eth1_name}\""
  else
    interfaces1=""
    extraRules1=""
  fi

  readarray nameservers < <(grep ^nameserver /etc/resolv.conf | sed -r \
    -e 's/^nameserver[[:space:]]+([0-9.a-fA-F:]+).*/"\1"/' \
    -e 's/127[0-9.]+/8.8.8.8/' \
    -e 's/::1/8.8.8.8/' )

  if [[ "$eth0_name" = eth* ]]; then
    predictable_inames="usePredictableInterfaceNames = lib.mkForce false;"
  else
    predictable_inames="usePredictableInterfaceNames = lib.mkForce true;"
  fi
  cat > /etc/nixos/networking.nix << EOF
{ lib, ... }: {
  # This file was populated at runtime with the networking
  # details gathered from the active system.
  networking = {
    nameservers = [ ${nameservers[@]} ];
    defaultGateway = "${gateway}";
    defaultGateway6 = "${gateway6}";
    dhcpcd.enable = false;
    $predictable_inames
    interfaces = {
      $eth0_name = {
        ipv4.addresses = [$(for a in "${eth0_ip4s[@]}"; do echo -n "
          $a"; done)
        ];
        ipv6.addresses = [$(for a in "${eth0_ip6s[@]}"; do echo -n "
          $a"; done)
        ];
        ipv4.routes = [ { address = "${gateway}"; prefixLength = 32; } ];
        ipv6.routes = [ { address = "${gateway6}"; prefixLength = 128; } ];
      };
      $interfaces1
    };
  };
  services.udev.extraRules = ''
    ATTR{address}=="${ether0}", NAME="${eth0_name}"
    $extraRules1
  '';
}
EOF

cat > /etc/nixos/userdata/userdata.json << EOF
{
    "api": {
        "token": "$API_TOKEN"
    },
    "backblaze": {
        "accountId": "$BACKBLAZE_KEY_ID",
        "accountKey": "$BACKBLAZE_ACCOUNT_KEY",
        "bucket": "$BACKBLAZE_BUCKET_NAME"
    },
    "bitwarden": {
        "enable": true
    },
    "cloudflare": {
        "apiKey": "$CF_TOKEN"
    },
    "databasePassword": "$DB_PASSWORD",
    "domain": "$DOMAIN",
    "hashedMasterPassword": "$HASHED_PASSWORD",
    "hostname": "$DOMAIN",
    "nextcloud": {
        "enable": true,
        "adminPassword": "$PASSWORD",
        "databasePassword": "$PASSWORD"
    },
    "gitea": {
        "enable": true
    },
    "jitsi": {
        "enable": true
    },
    "ocserv": {
        "enable": true
    },
    "pleroma": {
        "enable": true
    },
    "timezone": "Europe/Uzhgorod",
    "resticPassword": "$PASSWORD",
    "username": "$LUSER"
}
EOF
}

makeSwap() {
  # TODO check currently available swapspace first
  swapFile=$(mktemp /tmp/nixos-infect.XXXXX.swp)
  dd if=/dev/zero "of=$swapFile" bs=1M count=$((1*1024))
  chmod 0600 "$swapFile"
  mkswap "$swapFile"
  swapon -v "$swapFile"
}

removeSwap() {
  swapoff -a
  rm -vf /tmp/nixos-infect.*.swp
}

isEFI() {
  [ -d /sys/firmware/efi ]
}

findESP() {
  esp=""
  for d in /boot/EFI /boot/efi /boot; do
    [[ ! -d "$d" ]] && continue
    [[ "$d" == "$(df "$d" --output=target | sed 1d)" ]] \
      && esp="$(df "$d" --output=source | sed 1d)" \
      && break
  done
  [[ -z "$esp" ]] && { echo "ERROR: No ESP mount point found"; return 1; }
  for uuid in /dev/disk/by-uuid/*; do
    [[ $(readlink -f "$uuid") == "$esp" ]] && echo $uuid && return 0
  done
}

prepareEnv() {
  # $esp and $grubdev are used in makeConf()
  if isEFI; then
    esp="$(findESP)"
  else
    for grubdev in /dev/vda /dev/sda /dev/nvme0n1 ; do [[ -e $grubdev ]] && break; done
  fi

  # Retrieve root fs block device
  #                   (get root mount)  (get partition or logical volume)
  rootfsdev=$(mount | grep "on / type" | awk '{print $1;}')
  rootfstype=$(df $rootfsdev --output=fstype | sed 1d)

  # DigitalOcean doesn't seem to set USER while running user data
  export USER="root"
  export HOME="/root"

  # Nix installer tries to use sudo regardless of whether we're already uid 0
  #which sudo || { sudo() { eval "$@"; }; export -f sudo; }
  # shellcheck disable=SC2174
  mkdir -p -m 0755 /nix
}

fakeCurlUsingWget() {
  # Use adapted wget if curl is missing
  which wget && { \
    curl() {
      eval "wget $(
        (local isStdout=1
        for arg in "$@"; do
          case "$arg" in
            "-o")
              echo "-O";
              isStdout=0
              ;;
            "-O")
              isStdout=0
              ;;
            "-L")
              ;;
            *)
              echo "$arg"
              ;;
          esac
        done;
        [[ $isStdout -eq 1 ]] && echo "-O-"
        )| tr '\n' ' '
      )"
    }; export -f curl; }
}

req() {
  type "$1" > /dev/null 2>&1 || which "$1" > /dev/null 2>&1
}

checkEnv() {
  [[ "$(whoami)" == "root" ]] || { echo "ERROR: Must run as root"; return 1; }

  # Perform some easy fixups before checking
  # TODO prevent multiple calls to apt-get update
  (which dnf && dnf install -y perl-Digest-SHA) || true # Fedora 24
  which bzcat || (which yum && yum install -y bzip2) \
              || (which apt-get && apt-get update && apt-get install -y bzip2) \
              || true
  which xzcat || (which yum && yum install -y xz-utils) \
              || (which apt-get && apt-get update && apt-get install -y xz-utils) \
              || true
  which curl  || fakeCurlUsingWget \
              || (which apt-get && apt-get update && apt-get install -y curl) \
              || true

  req curl || req wget || { echo "ERROR: Missing both curl and wget";  return 1; }
  req bzcat            || { echo "ERROR: Missing bzcat";               return 1; }
  req xzcat            || { echo "ERROR: Missing xzcat";               return 1; }
  req groupadd         || { echo "ERROR: Missing groupadd";            return 1; }
  req useradd          || { echo "ERROR: Missing useradd";             return 1; }
  req ip               || { echo "ERROR: Missing ip";                  return 1; }
  req awk              || { echo "ERROR: Missing awk";                 return 1; }
  req cut || req df    || { echo "ERROR: Missing coreutils (cut, df)"; return 1; }
}

infect() {
  # Add nix build users
  # FIXME run only if necessary, rather than defaulting true
  groupadd nixbld -g 30000 || true
  for i in {1..10}; do
    useradd -c "Nix build user $i" -d /var/empty -g nixbld -G nixbld -M -N -r -s "$(which nologin)" "nixbld$i" || true
  done
  # TODO use addgroup and adduser as fallbacks
  #addgroup nixbld -g 30000 || true
  #for i in {1..10}; do adduser -DH -G nixbld nixbld$i || true; done

  curl -L https://nixos.org/nix/install | $SHELL

  # shellcheck disable=SC1090
  source ~/.nix-profile/etc/profile.d/nix.sh

  [[ -z "$NIX_CHANNEL" ]] && NIX_CHANNEL="nixos-21.05"
  nix-channel --remove nixpkgs
  nix-channel --add "https://nixos.org/channels/$NIX_CHANNEL" nixos
  nix-channel --update

  export NIXOS_CONFIG=/etc/nixos/configuration.nix

  nix-env --set \
    -I nixpkgs=$HOME/.nix-defexpr/channels/nixos \
    -f '<nixpkgs/nixos>' \
    -p /nix/var/nix/profiles/system \
    -A system

  # Remove nix installed with curl | bash
  rm -fv /nix/var/nix/profiles/default*
  /nix/var/nix/profiles/system/sw/bin/nix-collect-garbage

  # Reify resolv.conf
  [[ -L /etc/resolv.conf ]] && mv -v /etc/resolv.conf /etc/resolv.conf.lnk && cat /etc/resolv.conf.lnk > /etc/resolv.conf

  # Stage the Nix coup d'état
  touch /etc/NIXOS
  echo etc/nixos                   > /etc/NIXOS_LUSTRATE
  echo etc/resolv.conf            >> /etc/NIXOS_LUSTRATE
  echo root/.nix-defexpr/channels >> /etc/NIXOS_LUSTRATE

  rm -rf /boot.bak
  isEFI && umount "$esp"
  mv -v /boot /boot.bak
  if isEFI; then
    mkdir /boot
    mount "$esp" /boot
    find /boot -depth ! -path /boot -exec rm -rf {} +
  fi
  /nix/var/nix/profiles/system/bin/switch-to-configuration boot
}

[ "$PROVIDER" = "digitalocean" ] && doNetConf=y # digitalocean requires detailed network config to be generated

apt update
apt install git tar wget curl jq
checkEnv
prepareEnv
makeSwap # smallest (512MB) droplet needs extra memory!
makeConf
infect
removeSwap

if [[ -z "$NO_REBOOT" ]]; then
  reboot
fi