Optionally generate test coverage reports

CMake/CodeCoverage.cmake

@@ -0,0 +1,184 @@
+# Copyright (c) 2012 - 2015, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without
+#    specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# USAGE:
+
+# 0. (Mac only) If you use Xcode 5.1 make sure to patch geninfo as described here:
+#      http://stackoverflow.com/a/22404544/80480
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt:
+#      INCLUDE(CodeCoverage)
+#
+# 3. Set compiler flags to turn off optimization and enable coverage:
+#    SET(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+#	 SET(CMAKE_C_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+#
+# 3. Use the function SETUP_TARGET_FOR_COVERAGE to create a custom make target
+#    which runs your test executable and produces a lcov code coverage report:
+#    Example:
+#	 SETUP_TARGET_FOR_COVERAGE(
+#				my_coverage_target  # Name for custom target.
+#				test_driver         # Name of the test driver executable that runs the tests.
+#									# NOTE! This should always have a ZERO as exit code
+#									# otherwise the coverage generation will not complete.
+#				coverage            # Name of output directory.
+#				)
+#
+# 4. Build a Debug build:
+#	 cmake -DCMAKE_BUILD_TYPE=Debug ..
+#	 make
+#	 make my_coverage_target
+#
+#
+
+# Check prereqs
+FIND_PROGRAM( GCOV_PATH gcov )
+FIND_PROGRAM( LCOV_PATH lcov )
+FIND_PROGRAM( GENHTML_PATH genhtml )
+FIND_PROGRAM( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/tests)
+
+IF(NOT GCOV_PATH)
+	MESSAGE(FATAL_ERROR "gcov not found! Aborting...")
+ENDIF() # NOT GCOV_PATH
+
+SET(CMAKE_CXX_FLAGS_COVERAGE
+    "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+    CACHE STRING "Flags used by the C++ compiler during coverage builds."
+    FORCE )
+SET(CMAKE_C_FLAGS_COVERAGE
+    "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+    CACHE STRING "Flags used by the C compiler during coverage builds."
+    FORCE )
+SET(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used for linking binaries during coverage builds."
+    FORCE )
+SET(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+    FORCE )
+MARK_AS_ADVANCED(
+    CMAKE_CXX_FLAGS_COVERAGE
+    CMAKE_C_FLAGS_COVERAGE
+    CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+IF ( NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR CMAKE_BUILD_TYPE STREQUAL "Coverage"))
+  MESSAGE( WARNING "Code coverage results with an optimized (non-Debug) build may be misleading" )
+ENDIF() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug"
+
+
+# Param _targetname     The name of new the custom make target
+# Param _testrunner     The name of the target which runs the tests.
+#						MUST return ZERO always, even on errors.
+#						If not, no coverage report will be created!
+# Param _outputname     lcov output is generated as _outputname.info
+#                       HTML report is generated in _outputname/index.html
+# Optional fourth parameter is passed as arguments to _testrunner
+#   Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _testrunner _outputname)
+
+	IF(NOT LCOV_PATH)
+		MESSAGE(FATAL_ERROR "lcov not found! Aborting...")
+	ENDIF() # NOT LCOV_PATH
+
+	IF(NOT GENHTML_PATH)
+		MESSAGE(FATAL_ERROR "genhtml not found! Aborting...")
+	ENDIF() # NOT GENHTML_PATH
+
+	# Setup target
+	ADD_CUSTOM_TARGET(${_targetname}
+
+		# Cleanup lcov
+		${LCOV_PATH} --directory . --zerocounters
+
+		# Run tests
+		COMMAND ${_testrunner} ${ARGV3}
+
+		# Capturing lcov counters and generating report
+		COMMAND ${LCOV_PATH} --directory . --capture --output-file ${_outputname}.info
+		COMMAND ${LCOV_PATH} --remove ${_outputname}.info 'tests/*' '/usr/*' --output-file ${_outputname}.info.cleaned
+		COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info.cleaned
+		COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info ${_outputname}.info.cleaned
+
+		WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+		COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+	)
+
+	# Show info where to find the report
+	ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+		COMMAND ;
+		COMMENT "Open ./${_outputname}/index.html in your browser to view the coverage report."
+	)
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE
+
+# Param _targetname     The name of new the custom make target
+# Param _testrunner     The name of the target which runs the tests
+# Param _outputname     cobertura output is generated as _outputname.xml
+# Optional fourth parameter is passed as arguments to _testrunner
+#   Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE_COBERTURA _targetname _testrunner _outputname)
+
+	IF(NOT PYTHON_EXECUTABLE)
+		MESSAGE(FATAL_ERROR "Python not found! Aborting...")
+	ENDIF() # NOT PYTHON_EXECUTABLE
+
+	IF(NOT GCOVR_PATH)
+		MESSAGE(FATAL_ERROR "gcovr not found! Aborting...")
+	ENDIF() # NOT GCOVR_PATH
+
+	ADD_CUSTOM_TARGET(${_targetname}
+
+		# Run tests
+		${_testrunner} ${ARGV3}
+
+		# Running gcovr
+		COMMAND ${GCOVR_PATH} -x -r ${CMAKE_SOURCE_DIR} -e '${CMAKE_SOURCE_DIR}/tests/'  -o ${_outputname}.xml
+		WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+		COMMENT "Running gcovr to produce Cobertura code coverage report."
+	)
+
+	# Show info where to find the report
+	ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+		COMMAND ;
+		COMMENT "Cobertura code coverage report saved in ${_outputname}.xml."
+	)
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE_COBERTURA

CMake/Test.cmake

@@ -24,6 +24,10 @@ function(configure_test)
 
     list(APPEND CONFIGURE_TEST_WRAPPERS "malloc" "calloc" "realloc" "free")
 
+    if (enable-coverage)
+        add_compile_options(-g -O0 --coverage -fprofile-arcs -ftest-coverage)
+    endif()
+
     list(LENGTH CONFIGURE_TEST_WRAPPERS WRAPPED_COUNT)
 
     if(NOT ${WRAPPED_COUNT} STREQUAL "0")
@@ -45,5 +49,12 @@ function(configure_test)
 
     target_link_libraries(${CONFIGURE_TEST_NAME}_test ${CMOCKA_LIBRARIES} ${CONFIGURE_TEST_LIBRARIES})
 
-    set(test_targets ${test_targets} ${CONFIGURE_TEST_NAME}_test PARENT_SCOPE)
+    if (enable-coverage)
+        target_link_libraries(${CONFIGURE_TEST_NAME}_test gcov)
+        setup_target_for_coverage(
+            ${CONFIGURE_TEST_NAME}_cov
+            ${CONFIGURE_TEST_NAME}_test
+            ${CMAKE_RUNTIME_OUTPUT_DIRECTORY}/coverage
+        )
+    endif()
 endfunction()

CMakeLists.txt

@@ -49,6 +49,7 @@ option(enable-binding-event "Enables binding event subscription" YES)
 option(zsh-completions "Zsh shell completions" NO)
 option(default-wallpaper "Installs the default wallpaper" YES)
 option(enable-tests "Enables test suite" YES)
+option(enable-coverage "Enables test coverage" NO)
 
 find_package(JsonC REQUIRED)
 find_package(PCRE REQUIRED)
@@ -134,6 +135,9 @@ install(
 
 if(enable-tests)
     if (CMOCKA_FOUND)
+        if(enable-coverage)
+            include(CodeCoverage)
+        endif()
         add_subdirectory(test)
     else()
         message(WARNING "Not buliding tests - cmocka is required.")