input and seat command docs

This commit is contained in:
Tony Crisci 2017-12-16 08:19:33 -05:00
parent b3a0309f26
commit 2624f55f8d
3 changed files with 53 additions and 27 deletions

View file

@ -1,5 +1,5 @@
///// /////
vim:set ts=4 sw=4 tw=82 noet: vim:set ft=asciidoc ts=4 sw=4 tw=82 noet:
///// /////
sway-input (5) sway-input (5)
============== ==============
@ -11,12 +11,37 @@ sway-input - input configuration file and commands
Description Description
----------- -----------
Sway allows for configuration of libinput devices within the sway configuration file. Sway allows for configuration of devices within the sway configuration file.
sway-input commands must be used inside an _input { }_ block in the config. sway-input commands must be used inside an _input { }_ block in the config.
To obtain a list of available device identifiers, run **swaymsg -t get_inputs**. To obtain a list of available device identifiers, run **swaymsg -t get_inputs**.
Commands Input Commands
-------- --------------
Keyboard Configuration
~~~~~~~~~~~~~~~~~~~~~~
For more information on these xkb configuration options, see
**xkeyboard-config**(7).
**input** <identifier> xkb_layout <layout_name>::
Sets the layout of the keyboard like _us_ or _de_.
**input** <identifier> xkb_model <model_name>::
Sets the model of the keyboard. This has an influence for some extra keys your
keyboard might have.
**input** <identifier> xkb_options <options>::
Sets extra xkb configuration options for the keyboard.
**input** <identifier> xkb_rules <rules>::
Sets files of rules to be used for keyboard mapping composition.
**input** <identifier> xkb_variant <variant>::
Sets the variant of the keyboard like _dvorak_ or _colemak_.
Libinput Configuration
~~~~~~~~~~~~~~~~~~~~~~
**input** <identifier> accel_profile <adaptive|flat>:: **input** <identifier> accel_profile <adaptive|flat>::
Sets the pointer acceleration profile for the specified input device. Sets the pointer acceleration profile for the specified input device.
@ -53,6 +78,23 @@ Commands
**input** <identifier> tap <enabled|disabled>:: **input** <identifier> tap <enabled|disabled>::
Enables or disables tap for specified input device. Enables or disables tap for specified input device.
Seat Configuration
------------------
Configure options for multiseat mode. sway-seat commands must be used inside a
_seat { }_ block in the config.
A _seat_ is a collection of input devices that act independently of each other.
Seats are identified by name and the default seat is _seat0_ if no seats are
configured. Each seat has an independent keyboard focus and a separate cursor that
is controlled by the pointer devices of the seat. This is useful for multiple
people using the desktop at the same time with their own devices (each sitting in
their own "seat").
**seat** <name> attach <input_identifier>::
Attach an input device to this seat by its input identifier. A special value
of _*_ will attach all devices to the seat.
See Also See Also
-------- --------

View file

@ -1,5 +1,5 @@
///// /////
vim:set ts=4 sw=4 tw=82 noet: vim:set ft=asciidoc ts=4 sw=4 tw=82 noet:
///// /////
:quotes.~: :quotes.~:
@ -93,27 +93,6 @@ The following environment variables have an effect on sway:
*SWAYSOCK*:: *SWAYSOCK*::
Specifies the path to the sway IPC socket. Specifies the path to the sway IPC socket.
*WLC_DRM_DEVICE*::
Specifies the device to use in DRM mode.
*WLC_SHM*::
Set 1 to force EGL clients to use shared memory.
*WLC_OUTPUTS*::
Number of fake outputs to use when running in X11 mode.
*WLC_XWAYLAND*::
Set to 0 to disable Xwayland support.
*WLC_LIBINPUT*::
Set to 1 to force libinput (even in X11 mode).
*WLC_REPEAT_DELAY*::
Configures the keyboard repeat delay.
*WLC_REPEAT_RATE*::
Configures the keyboard repeat rate.
*XKB_DEFAULT_RULES*, *XKB_DEFAULT_MODEL*, *XKB_DEFAULT_LAYOUT*, *XKB_DEFAULT_VARIANT*, *XKB_DEFAULT_OPTIONS*:: *XKB_DEFAULT_RULES*, *XKB_DEFAULT_MODEL*, *XKB_DEFAULT_LAYOUT*, *XKB_DEFAULT_VARIANT*, *XKB_DEFAULT_OPTIONS*::
Configures the xkb keyboard settings. See xkeyboard-config(7). Configures the xkb keyboard settings. See xkeyboard-config(7).

View file

@ -312,7 +312,7 @@ The default colors are:
**hide_edge_borders** <none|vertical|horizontal|both|smart>:: **hide_edge_borders** <none|vertical|horizontal|both|smart>::
Hide window borders adjacent to the screen edges. Default is _none_. Hide window borders adjacent to the screen edges. Default is _none_.
**input** <input device> <block of commands>:: **input** <input_device> <block of commands>::
Append _{_ to this command, the following lines will be commands to configure Append _{_ to this command, the following lines will be commands to configure
the named input device, and _}_ on its own line will close the block. the named input device, and _}_ on its own line will close the block.
+ +
@ -320,6 +320,11 @@ The default colors are:
+ +
See **sway-input**(5) for details. See **sway-input**(5) for details.
**seat** <seat_name> <block of commands>::
Append _{_ to this command, the following lines will be commands to configure
the named seat, and _}_ on its own line will close the block.
See **sway-input**(5) for details.
**kill**:: **kill**::
Kills (force-closes) the currently-focused container and all of its children. Kills (force-closes) the currently-focused container and all of its children.