9e8aa39530
Implement per side and per direction outer gaps
...
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`
`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.
Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.
Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
2018-11-07 22:44:11 -05:00
6a42643784
gaps: remove duplicate inner gaps
2018-11-07 22:42:18 -05:00
4a21981855
Add focus_follows_mouse always. ( #3081 )
...
* Add focus_follows_mouse_mode.
* Fail if focus_follows_mouse is invalid.
* Fix indentation.
2018-11-06 21:58:08 +01:00
001ec1f3fd
Merge pull request #3046 from tokyovigilante/relative-transform
...
Add relative output transform
2018-11-06 14:17:33 +01:00
5032acb7a5
Add relative output transform
...
This commit enhances the output transform
command with options for a relative transform,
i.e. the provided transform will be applied as
an offset to the current transform. Append
`clockwise` to rotate clockwise from the current
rotation, or `anticlockwise` to rotate in the
opposite direction.
For example, if the output LVDS-1 is rotated
90 degrees clockwise, the command
`output LVDS-1 transform 90 clockwise`
will rotate the display to 180 degrees.
All transform options are supported,
including flipped transforms.
Relative transforms can only be applied to
a single output and cannot be used with
a wildcard (*) output specifier.
2018-11-05 22:58:27 +00:00
994c35e375
Merge pull request #3068 from emersion/effective-damage
...
Use wlr_surface_get_effective_damage
2018-11-05 21:31:22 +01:00
25bea8f6a5
Merge branch 'master' into effective-damage
2018-11-05 21:21:47 +01:00
fbf1730557
Merge pull request #3078 from Emantor/fix/exec_always_double_load
...
Fix the double execution of exec_always commands on config reloads
2018-11-05 21:15:56 +01:00
f54287eaf3
config: mention that reload message is also printed on validation
2018-11-05 21:06:28 +01:00
5fdffea99a
commands/exec_always: defer command on config validation
...
The exec_always command was executed twice, since it was not checking for the
config->validating variable.
Fix this by defering the command if the configuration is validating.
Fixes #3072
2018-11-05 20:32:45 +01:00
e9c77970fa
Merge pull request #3071 from RedSoxFan/fix-3064
...
Fix focus_wrapping yes
2018-11-05 18:59:44 +01:00
c8c1ecaf25
Fix focus_wrapping yes
...
It appears that the focus code that handles `focus_wrapping yes` was
removed during the conversion to type safety. This re-implements the
focus code for when `focus_wrapping` is set to `yes` (default). Neither
the `no` or `force` options appear to be effected and should be working.
2018-11-05 12:39:44 -05:00
77d581f144
Merge pull request #3075 from swaywm/revert-3073-swayidle_workaround
...
Revert "Work around swayidle never triggering on SIGUSR1"
2018-11-05 18:22:29 +01:00
9a3cd000a3
Revert "Work around swayidle never triggering on SIGUSR1"
2018-11-05 12:12:44 -05:00
0e985d6c8e
Merge pull request #3073 from oranenj/swayidle_workaround
...
Work around swayidle never triggering on SIGUSR1
2018-11-05 18:10:09 +01:00
4f21b6f670
Work around swayidle never triggering on SIGUSR1
2018-11-05 18:54:41 +02:00
d0bb450681
Merge pull request #3066 from mwenzkowski/fix-gaps
...
Improvements to the runtime only part of the gaps command
2018-11-05 15:33:40 +01:00
bcbd0a9b45
Merge pull request #3067 from madblobfish/three-trivial-fixes
...
Improve documentation and remove dead code
2018-11-04 23:30:57 +01:00
0e85b92250
Use wlr_surface_get_effective_damage
2018-11-04 23:21:37 +01:00
e47b31c556
document swaymessage type for get_seats
2018-11-04 22:49:44 +01:00
67866dc378
gaps: Improve error reporting
...
Always raise an error if the runtime only gaps command is found in the
config file.
2018-11-04 20:40:14 +01:00
60df5cc9f8
Correct manpage regarding gaps command
...
The command 'gaps inner|outer all|current set|plus|minus <amount>'
is not valid in the configuration file, hence list it accordingly.
2018-11-04 20:10:41 +01:00
7d8ed7a3a7
added space after table in sway.5 manpage
2018-11-04 17:38:35 +01:00
417a10f477
removed unneeded code fragment
2018-11-04 17:38:13 +01:00
d19648a304
Merge pull request #3061 from colemickens/output-current-mode
...
ipc: move refresh to current_mode
2018-11-03 23:44:04 +01:00
ef888321ba
ipc: move refresh from output to output->current_mode
2018-11-03 15:09:34 -07:00
71686ed0e7
fix: restore refresh to the modes_array
2018-11-03 15:09:34 -07:00
c18cd9dd03
Merge pull request #3021 from Snaipe/singlekey-binding-trigger
...
binding: match single-key bindings if no multi-key binding matched
2018-11-03 17:57:59 +01:00
baf4841d79
Merge pull request #3052 from colemickens/output-current-mode
...
Correct "Current mode" in `swaymsg -t get_outputs` for scaled outputs
2018-11-03 17:37:15 +01:00
1f486fe898
swaymsg: get_outputs: use output->current_mode for current mode display
2018-11-03 04:30:53 -07:00
d05aeb77a0
sway-ipc: includes current_mode for each output
2018-11-03 04:30:49 -07:00
6297b757b1
Correction to dependency updates
2018-11-02 13:48:25 -04:00
842a555a2f
Clean up dependencies in README.md
2018-11-02 13:47:52 -04:00
b1aec1ef14
Merge pull request #3028 from emersion/disambiguate-drop-root-error
...
Make it clear that being able to restore root is a failure
2018-11-01 19:01:18 +01:00
f90ff1210b
Teardown compositor when failing to drop permissions
2018-11-01 18:50:06 +01:00
9dae68eba5
Make it clear that being able to restore root is a failure
2018-11-01 18:49:42 +01:00
cd0bae80b6
Fix #2992
...
Move a function call, such that data it depends on is initialized before.
2018-11-01 08:15:03 -04:00
8ad06f0ec5
Merge pull request #3041 from RyanDwyer/marks-props-to-container
...
Move view marks properties to container struct
2018-11-01 13:01:15 +01:00
9fc736f4e1
Move view marks properties to container struct
...
Like border properties, this will be needed to implement layout saving
and restoring.
2018-11-01 18:09:51 +10:00
480b03b734
Merge pull request #3040 from RyanDwyer/border-props-to-container
...
Move view border properties to container struct
2018-11-01 01:03:41 +01:00
35fda6765b
Merge pull request #3037 from RyanDwyer/focus-output-wrap
...
Wrap to fartherest output when running focus output
2018-11-01 01:01:17 +01:00
bf19f63a79
Wrap to fartherest output when running focus output
...
Also moves the `opposite_direction` function into `util.c` as it's used
in two places now.
2018-11-01 08:29:45 +10:00
f841d2ed74
Merge pull request #3042 from madblobfish/swaymsg-fish-completions
...
improved swaymsg completions for fish
2018-10-31 18:26:03 +01:00
4e20907364
improved swaymsg completions for fish
2018-10-31 17:56:33 +01:00
528c7495bb
Move view border properties to container struct
...
This will be needed to implement layout saving and restoring, as we need
to be able to configure borders on a placeholder container which has no
view.
2018-10-31 23:56:20 +10:00
e21a23348b
Merge pull request #3031 from atomnuker/master
...
Restore previous tabbed layout behavior
2018-10-31 14:51:04 +01:00
e9c136b0ee
Merge pull request #3027 from madblobfish/remove-resolve_path
...
Remove resolve_path() from utils
2018-10-31 14:48:17 +01:00
fbbf810668
Update ISSUE_TEMPLATE.md
2018-10-31 08:13:56 -04:00
1f23ec2d05
Revert "Add resolve_path() to utils"
...
This reverts commit c9694ee63d
2018-10-31 13:04:08 +01:00
d3a6263311
Merge pull request #3033 from RyanDwyer/remove-movement-direction
...
Remove enum movement_direction
2018-10-30 15:17:55 +01:00
Brian Ashworth
Connor E
emersion
Ryan Walklin
Drew DeVault
Rouven Czerwinski
Jarkko Oranen
madblobfish
mwenzkowski
Cole Mickens
Ryan Dwyer