Commit graph

6348 commits

Author SHA1 Message Date
Drew DeVault 0bafc55176
Merge pull request #3701 from emersion/meson-subproject-disable-unneeded
Disable unneeded wlroots subproject features
2019-02-16 22:57:42 +01:00
Ian Fan f54077dbca tray: fix memory leaks 2019-02-16 21:49:16 +01:00
Ian Fan 26d6360feb tray: when a service is lost, remove all matching items
Before, only the first matching item would be removed, which could leave
stale items.
2019-02-16 21:49:16 +01:00
Vincent Vanlaer cfacf85755 Check layout before getting pointer surface coords
This fixes issues of clients at the edge of the screen, like swaybar,
ignoring buttons.
2019-02-16 21:46:19 +01:00
emersion 859a884e82
Disable unneeded wlroots subproject features 2019-02-16 11:57:41 +01:00
Drew DeVault 5c78e5cd2c
Merge pull request #3698 from yabirgb/master
Spanish translation of the README
2019-02-16 04:44:31 +01:00
Yábir García db351dc670 Fix accents 2019-02-16 04:29:36 +01:00
Yábir García 9e590c4d01 Add spanish link to the home README 2019-02-16 04:17:18 +01:00
Yábir Benchakhtir 3c59069cb0
Spanish translation of the README 2019-02-16 03:57:14 +01:00
Drew DeVault cdbf8e8b25
Merge pull request #3692 from ianyfan/swaybar
Fix crash and memory leak on bar termination
2019-02-15 16:25:28 +01:00
Ian Fan d3c527220a tray: use correct parameter to set bus slot to floating
Counter-intuitively, `sd_bus_slot_set_floating` expects 0 to set it to
floating.
2019-02-15 15:15:45 +00:00
Ian Fan 5484f308b9 swaybar: prevent signal handler from firing during termination
This prevents a heap-use-after-free crash when sway terminates.
2019-02-15 14:09:14 +00:00
Brian Ashworth 96de2b539c apply_output_config: dpms on before modeset
On the DRM backend, if an output is dpms'd off and a different output is
hotplugged, the CRTC for the output is reclaimed. When modesetting an
output without a CRTC, a CRTC will not be given to an output that is not
desired to be enabled. This splits setting the dpms state in
apply_output_config. If the output should be dpms on, the it is enabled
before attempting to modeset. Otherwise, it is dpms'd off after setting
everything else.

This also adds DPMS_ON to the default output configs.
2019-02-15 09:43:48 +01:00
Brian Ashworth e8c472aee9 seatop_move_tiling: do not move to descendant
In seatop_move_tiling, it is possible to cause a stack overflow by
dragging a container into one of its descendants. This disables the
ability to move into a descendant.
2019-02-14 14:07:13 +01:00
Brian Ashworth ab42874f71 seat: allow tree focus changes while layer focused
This allows the focused inactive tree node and visible workspaces to be
changed while a surface layer has focus. The layer temporarily loses
focus, the tree focus changes, and the layer gets refocused.
2019-02-14 11:01:08 +01:00
Drew DeVault cc39bbdff3
Merge pull request #3675 from RedSoxFan/fix-move-tiling-self
seatop_move_tiling: use tab/stack parent not self
2019-02-14 00:50:44 +01:00
Brian Ashworth 9b8249c350 seatop_move_tiling: use tab/stack parent not self
When moving a descendant of a tabbed or stacked container, it is possible
for the target node to be the node being moved. This causes a segfault in
`handle_finish` since the node will be detached and then attempted to be
attached to it own parent, which is NULL due to the detach. In this
case, the target node should not be set to the node being moved, but the
parent of the node. This also allows for a descendant of a tabbed or
stacked container to be dragged out of the tabs/stacks and to be a
sibling of the tabbbed/stacked container, which was not previously
possible.
2019-02-13 14:32:47 -05:00
Brian Ashworth d168d65f2c subsurface_get_root_coords: break on NULL
It is possible for `wlr_surface_is_subsurface` to return true, but
`wlr_surface_from_wlr_surface` to be NULL. This adds a NULL check to the
value returned by `wlr_surface_from_wlr_surface` and breaks out of the
while loop in `subsurface_get_root_coords`.
2019-02-13 09:51:40 +01:00
Brian Ashworth 1bccde68a4 cursor: relative-pointer-v1 time is usec
In handle_cursor_motion, the timestamp passed to
`wlr_relative_pointer_manager_v1_send_relative_motion` should be
microseconds (not milliseconds) according to relative-pointer-v1 spec.
2019-02-13 09:49:34 +01:00
athrungithub 98b40d31c1 Don't remove from scratchpad on move to workspace
on move container window to another workspace,
not remove from scratchpad.
2019-02-12 23:47:10 -05:00
Drew DeVault c44794bedc
Merge pull request #3665 from emersion/layer-map-rebase
Rebase cursor when a layer surface maps
2019-02-12 23:22:33 +01:00
Drew DeVault f390a6ef8c
Merge pull request #3667 from emersion/fix-meson-version
Fix --version when building from tarball
2019-02-12 23:22:13 +01:00
emersion cfee167b7b
Fix --version when building from tarball 2019-02-12 23:13:24 +01:00
emersion 97c89b24b8
Rebase cursor when a layer surface maps
Also removes an extraneous arrange_outputs call, it's already called if
necessary in arrange_layers.

Updates https://github.com/swaywm/sway/issues/3080
2019-02-12 22:57:23 +01:00
Brian Ashworth fb4f29289f workspace_get_initial_output: handle focused layer
When a layer surface is focused, `seat_get_focused_workspace` will be
NULL. This changes `workspace_get_initial_output` to use output of the
focus inactive. If the focus inactive is also NULL, then either the
first output or the noop output will be used as fallbacks.
2019-02-11 10:13:16 +01:00
Brian Ashworth 2540e8ea79 Abort early when XDG_RUNTIME_DIR is not set
This aborts sway and displays an error message about XDG_RUNTIME_DIR
not being set without initializing the wl_display or logging any other
information.
2019-02-11 10:11:41 +01:00
Brian Ashworth d2c896ed84 fix misc memory leaks
This fixes a few misc memory leaks reported by asan:
- Items of `config->config_chain` are now freed instead of just the list
itself
- `bar->swaybar_command` is now freed
- The result returned by a seat subcommand is now returned instead of
leaked
2019-02-11 10:10:48 +01:00
Brian Ashworth a64a3ee6bb ipc: handle unnamed xkb_active_layout_name
If the active xkb_layout does not have a name, use `NULL` instead of
`json_object_new_string(NULL)`. This also makes it so swaymsg will pretty
print this as `(unnamed)`.
2019-02-11 01:07:11 +01:00
Brian Ashworth 418c19fe52 view: remove pointer constraints on unmap
If the view has any pointer constraints, ensure they are removed
before the view is unmapped and the surface is no longer tied to the
view.
2019-02-10 21:29:45 +01:00
Brian Ashworth 3952d4f4f3 input/keyboard: respect solo repeat_{rate,delay}
If `repeat_rate` or `repeat_delay` is set without the other being set,
the default was being used for both. This changes the logic to respect
the value given and use the default for the other when only one is set.
2019-02-10 18:45:02 +01:00
Rouven Czerwinski 605e515a93 fix double free for mode toggle if bar was invisible
If the bar was set to "invisible" and subsequently "toggle" was send twice, the
new mode was never set and the bar->mode was double freed.
Fix this by not requiring the bar->mode to be "hide" and instead show it
unconditionally, because it was either hidden or invisible.

Fixes #3637
2019-02-10 17:13:11 +01:00
Brian Ashworth 995b6edab6 container_at_stacked: skip titles when zero pixels
It is possible to make the title bars have a zero pixel height while
stacked, by using a blank font and no padding. This causes a division by
zero when attempting to calculate the child index in
container_at_stacked, which then results in a segfault when attempting
to access the child at that bad index (INT_MIN). This just skips the
check to see if the cursor is over a title bar of a child of a stacked
container when the title bar height is zero since there will be no title
bars.
2019-02-09 09:24:43 +01:00
Brian Ashworth f5190d1f79 bar_cmd_modifier: add support for none
sway-bar(5) documents `modifier none`, which comes from i3. This
implements the functionality for `modifier none` since it was not
previously implemented. The bar modifier toggles visibility of the bar
when the bar mode is set to hide. When the bar modifier is set to
`none`, the ability to toggle visibility of the bar will be disabled.
2019-02-08 16:02:45 +01:00
Drew DeVault f00fbe6861
Merge pull request #3619 from swaywm/revert-3595-ErrorIfConfigNotExist
Revert "Return false if config could not be loaded."
2019-02-08 03:30:11 +01:00
Drew DeVault 82d7a70b03 Revert "Return false if config could not be loaded."
This reverts commit 855368b67e.
2019-02-07 21:22:53 -05:00
Drew DeVault 385cf330ae Revert "Restore CWD if returning early."
This reverts commit 921e42c6c0.
2019-02-07 21:22:53 -05:00
Brian Ashworth ec5da0ca5b seat_configure_tablet_tool: configure xcursor
Since a tablet tool provides the WL_SEAT_CAPABILITY_POINTER capability,
sway will attempt to use the xcursor manager to set a cursor image. If
the tablet tool was the first (and possibly only) device to provide the
capability for the seat, the xcursor manager was not being configured
before attempting to set a cursor image. This was due to
`seat_configure_xcursor` only being called in `seat_configure_pointer`.
Since the xcursor manager was NULL in this case, it would cause a
segfault when attempting to set a cursor image. This adds a call to
`seat_configure_xcursor` in `seat_configure_tablet_tool` to ensure that
the seat has a xcursor manager.
2019-02-07 09:41:58 +01:00
Brian Ashworth 5a32a74b2d load_main_config: use given path, store realpath
Since `load_include_config` compares against the realpath of a config
file when checking if a config has already been added, the main config's
realpath has to be added to the config_chain.

However, includes from the main config should be processed relative to
the path given to allow for symbolic links. This stores the realpath in
`config->config_chain`, but uses the given path for all other
operations.
2019-02-07 09:41:05 +01:00
Brian Ashworth ee56428b64 Clarify error for options and positional args
When both options and positional arguments are given, sway would print
the error `Don't use options with the IPC client`. Over the past
several months, it seems like users are including this error message in
issues instead of a debug log due to not understanding that the error
message means there is an issue with their command.

This makes the error message more verbose and will hopefully make it so
more users understand that the message is not a bug in sway, but with
the command used.
2019-02-06 19:38:25 +01:00
Connor E 921e42c6c0 Restore CWD if returning early. 2019-02-06 18:23:20 +01:00
Connor E 855368b67e Return false if config could not be loaded. 2019-02-06 18:23:20 +01:00
Drew DeVault cdfc719494
Merge pull request #3597 from dnkl/fix-inverted-bitmask-check-in-ipc-has-event-listeners
ipc_has_event_listeners: fix inverted check of subscribed_events
2019-02-06 15:27:43 +01:00
Daniel Eklöf d3b3eb019a ipc_has_event_listeners: fix inverted check of subscribed_events
subscribed_events is a bit mask, with each *set* bit representing an
event the client has subscribed to.
2019-02-06 15:16:48 +01:00
Brian Ashworth c65057ef8b load_main_config: add realpath to config_chain
Since `load_include_config` compares against the realpath of a config
file when checking if a config has already been added, the main config's
realpath has to be added to the config_chain.
2019-02-06 09:36:33 +01:00
emersion 9b1905acf9 Fix close_popups for xdg-shell
wlr_xdg_popup_destroy will destroy popups, so we need to walk the tree
carefully. It's enough to just destroy all direct children, since destroying
the parent will also destroy all children.
2019-02-05 22:31:05 -05:00
Drew DeVault a3c5314856
Merge pull request #3587 from RedSoxFan/fix-background-missing-file
output_cmd_background: fix no file + valid mode
2019-02-05 22:09:59 +01:00
Brian Ashworth 89afb761ba output_cmd_background: fix no file + valid mode
If output_cmd_background is given a valid mode as the first argument,
then there is no file given and an error should be returned.

join_args should not be called with an argc of zero since it sets the
last character to the null terminator. With an argc of zero, the length
is zero causing a heap buffer overflow when setting the byte before the
start of argv to '\0'. This probably will not ever generate a segfault,
but may cause data corruption to whatever is directly before it in
memory. To make other such cases easier to detect, this also adds a
sway_assert in join_args when argc is zero.
2019-02-05 14:13:27 -05:00
Drew DeVault 09c2a46b3d
Merge pull request #3582 from c-edw/FixUninitializedInputManager
Initialize server so input manager is available.
2019-02-05 16:50:55 +01:00
Connor E e1b8190d2c Initialize server so input manager is available. 2019-02-05 15:39:22 +00:00
Drew DeVault 1fde9a9355
Merge pull request #3581 from c-edw/ValidateConfigNoInitialize
If validating the config, do it as early as possible.
2019-02-05 16:30:39 +01:00