Commit graph

296 commits

Author SHA1 Message Date
Brian Ashworth 35a82a8693 swaybar: fix cursor scale
This fixes a few issues with swaybar's cursor scaling:
1. The cursor scale is now changed when the output scale changes
2. The cursor scale is no longer bound by the max output scale when
swaybar is launched
3. Related to the previous item, the cursor is no longer tiny on low
scale outputs after the max output scale has changed

This also bumps up `wl_compositor` to version 4 to allow usage of
`wl_surface_damage_buffer`.
2018-12-15 09:26:50 +01:00
Brian Ashworth 549d9fe489 swaybar: fix sep block width for mixed scales
When there are outputs with mixed scales, it was possible for swaybar to
alter `block->separator_block_width` for an output with a higher scale,
and use the changed value for a lower scale output. This caused there to
be larger than normal separation between blocks on the lower scale
outputs. The issue is more obvious the larger the scale difference
between the highest scale output and the lowest scale output.

This fixes the issue by using a local variable that is originally set to
`block->separator_block_width` for rendering, but if it needs to be
increased, the local variable is the only thing touched.
2018-12-12 10:23:57 +01:00
Brian Ashworth 8b4fe7dd15 swaybar: handle block->urgent
When `block->urgent` is set, use the urgent colors. This matches i3bar's
behavior. Previously, swaybar just ignored the property.

This also adds in rendering for right borders, which was missing.
2018-12-12 10:17:39 +01:00
Hristo Venev 24e8ba048a Add relative coordinates in JSON for i3bar click events
Compatibility with i3 commit 161db6f17d734ac9deb0a20e81b78d4b2a92ce68.
2018-12-04 12:49:21 +02:00
Brian Ashworth 1bd8463481 Implement bar gaps
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
2018-11-28 11:24:14 -05:00
emersion 3a310f92ab
Replace _XOPEN_SOURCE with _POSIX_C_SOURCE
And make sure we don't define both in the same source file.
2018-11-25 17:19:43 +01:00
emersion bf7af9c690
Merge pull request #3083 from c-edw/feature/StripWorkspaceName
Implement strip_workspace_name.
2018-11-19 17:56:18 +01:00
Connor E 4bd46fb079 Implement strip_workspace_name. 2018-11-17 16:11:28 +00:00
Connor E eda1bf769f More frees. 2018-11-13 14:42:00 +00:00
Connor E b5d95f264d Add some missing frees. 2018-11-13 13:45:01 +00:00
Ian Fan 19421373b9 swaybar: when scrolling, check that there are workspaces to scroll on 2018-10-25 14:12:26 +01:00
Ian Fan c5541763c0 swaybar: fix scrolling behaviour
1. wrap_scroll has been fixed
2. release bindings are checked when returning early
2018-10-25 12:57:16 +01:00
Ian Fan c3fdabb725 swaybar: reverse order of workspaces list
This makes it congruent with its visual appearance, making it easier to
reason about.
2018-10-25 12:57:16 +01:00
Drew DeVault 41f744c224
Merge pull request #2925 from ianyfan/swaylock
swaylock: exit early if unable to get input inhibitor
2018-10-24 18:54:22 +02:00
Ian Fan 48cf430cee swaybar: absorb bar_init function into bar_setup 2018-10-23 12:25:52 +01:00
Ian Fan 9afcda59db swaybar: exit on display error 2018-10-23 12:22:51 +01:00
Ryan Dwyer 851b442f73 Fix swaybar crash when there's no status_command 2018-10-23 18:38:01 +10:00
emersion 2a32701b78
swaybar: fix hotplug 2018-10-21 17:46:40 +02:00
Ian Fan 1844a5bafb swaybar: render with minimum height, nominally text height 2018-10-20 21:21:57 +01:00
Ryan Dwyer a4ce5227c2 Put swaybar in overlay layer when using mode hide
This allows the bar to render over fullscreen views.
2018-10-20 16:48:43 +10:00
Rouven Czerwinski f52825336c swaybar: disallow left and right position and print error on default
The positions "left" and "right" are not allowed by the man page, remove them
from the allowed positions. Also print an error to stderr if we default to the
bottom position.

Fixes #2878
2018-10-20 08:21:44 +02:00
ossi.ahosalmi 79011e68df missing headers for swaybar/input.c 2018-10-19 15:55:30 +03:00
Ian Fan 499150a91b swaybar: separate input code to new file 2018-10-18 14:19:00 +01:00
Ryan Dwyer 32ba8154b8 Sway clients: Exit gracefully when compositor is unavailable 2018-10-15 21:57:59 +10:00
Ryan Dwyer 6921fdc6d6 Remove timerfd from loop implementation
timerfd doesn't work on the BSDs, so this replaces it with a timespec
for the expiry and uses a poll timeout to check the timers when needed.
2018-10-15 00:26:27 +10:00
Ryan Dwyer 4056c09e13 Move swaybar's event loop to common directory and refactor
* The loop functions are now prefixed with `loop_`.
* It is now easy to add timers to the loop.
* Timers are implemented using pollfd and timerfd, rather than manually
checking them when any other event happens to arrive.
2018-10-15 00:26:27 +10:00
Ian Fan 4dba7c084a swaybar: when hiding bar, save old height to be restored upon reshow
Previously, when the bar was hidden, the height would be set to 0.
This meant that if the bar was empty upon reshow, it would not render
since the height was still 0, which made it seem there was a problem.
Now, the height is not reset, but the width is, to indicate upon reshow
that the layer surface needed reconfiguring.
2018-10-14 13:33:12 +01:00
Ian Fan a29ee77411 swaybar: send signal to status when hiding or showing bar 2018-10-14 13:33:12 +01:00
Ian Fan f6f72cb949 swaybar: show hidden bar on urgency 2018-10-14 13:33:12 +01:00
Ian Fan 2f1fd80726 swaybar: show hidden bar on key event
Since wayland does not currently allow swaybar to create global
keybinds, this is handled within sway and sent to the bar using a custom
event, so as not to pollute existing events, called bar_state_update.
2018-10-14 13:33:12 +01:00
Ian Fan bcc61e5147 swaybar: handle mode/hidden_state changes
As well as adding the hidden_state property to the bar config struct,
this commit handles barconfig_update events when the mode or
hidden_state changes, and uses a new function determine_bar_visibility
to hide or show the bar as required, using, respectively,
destroy_layer_surface, which is also newly added, and add_layer_surface,
which has been changed to allow dynamically adding the surface.
2018-10-14 13:33:12 +01:00
Ian Fan 55ca16f2d8 swaybar: streamline ipc handling
The received json is handled outside of the case statement, which will
allow better extensibility.
This commit also introduces the variable bar_is_dirty, the return value
signifying whether the bar requires rendering.
2018-10-14 13:33:12 +01:00
Ian Fan fed11d1c7b swaybar: move mode & mode_pango_markup to bar struct
This distinguishes the binding mode from the distinct config mode, as
well as removing mode_pango_markup from the config struct where it
should not be present.
2018-10-14 13:33:12 +01:00
Ian Fan a388ffa127 swaybar: only send initial workspace request if workspace buttons are enabled 2018-10-14 13:33:12 +01:00
Ian Fan 19f0bf3864 swaybar: add free_hotspots helper function 2018-10-14 13:33:12 +01:00
Ian Fan a67fa8a05d swaybar: only subscribe to required events
This adds barconfig_update to the list of subscribed events, as well as
checking when the other events need to be subscribed to.
2018-10-14 13:33:12 +01:00
Ian Fan d0b54e932b swaybar: save id upon startup
This adds an id property to the bar, which will be used to filter
barconfig_update events
2018-10-14 13:33:12 +01:00
Ian Fan cd6917d4a8
Merge branch 'master' into bar-bindsym 2018-10-10 12:23:04 +00:00
Ryan Dwyer fa8959532b Fix program name in version strings
When running swaymsg -v, the version returned is actually the version of
swaymsg itself, yet the message displayed was "sway version <version>".
This can create confusion if users update sway and swaymsg but don't
restart sway, then use swaymsg to check the version.

This patch changes the wording to be "swaymsg version <version>"
instead, and likewise for swaybar.

To get the version of a running sway instance, users should run swaymsg
-t get_version.
2018-10-10 18:34:50 +10:00
Brian Ashworth d3f0e52784 bar-bindsym: address ianyfan's comments 2018-10-09 08:12:46 -04:00
Brian Ashworth 1c969e86f5 Implement bar bindsym 2018-10-09 08:12:46 -04:00
Ryan Dwyer 41bfd8c790 swaybar: allow null status_command
Sway sets a default status_command which runs date every second. This
patch removes this behaviour so the user can have a NULL status bar if
desired.

I had to swap swaybar's event_loop_poll and wl_display_flush so that it
would map the initial surface.
2018-10-08 22:23:55 +10:00
emersion d50f54fa42 swaybar: fix binding to wl_pointer multiple times 2018-10-06 19:13:44 +02:00
Ian Fan 65593f49bc swaybar: add leading comma to click event JSON 2018-10-02 14:05:51 +01:00
Arkadiusz Hiler eed0bc3ebd Add support for installing binaries with DT_RPATH
It's better to use DT_RPATH dynamic section of the elf binary to store
the paths of libraries to load instead of overwriting LD_LIBRARY_PATH
for the whole environment, causing surprises. This solution is much more
transparent and perfectly suitable for running contained installations
of wayland/wlroots/sway.

The code unsetting the LD_LIBRARY_PATH/LD_PRELOAD was also deleted as
it's a placebo security at best - we should trust the execution path
that leads us to running sway, and it's way too late to care about those
variables since we already started executing our compositor, thus we
would be compromised anyway.
2018-09-30 15:37:01 +03:00
Arkadiusz Hiler 1e70f7b19e Turn funcs() into funcs(void)
If they really do not take undefined number of arguments.
2018-09-30 14:09:05 +03:00
Ian Fan 02dfeea54c swaybar: synchronize rendering to output frames 2018-09-30 10:07:33 +01:00
Ian Fan 25e1f32738 swaybar: trim function prototypes 2018-09-28 14:09:33 +01:00
Ian Fan 751bb4a376 swaybar: move i3bar definitions into separate file 2018-09-28 13:54:58 +01:00
Ian Fan bcd2a8fe12 swaybar: remove unused focused_output property 2018-09-28 13:54:58 +01:00