Commit graph

1164 commits

Author SHA1 Message Date
Connor E 401df9cff4 Make load_include_configs void. Fix some cases where WD would not be restored. 2019-02-25 17:10:04 -05:00
emersion 54ad31a9dc Update for swaywm/wlroots#1517 2019-02-25 17:10:04 -05:00
Drew DeVault f22aef018b Remove refs to unimplemented debuglog command
Closes #3695
2019-02-18 15:11:48 -05:00
emersion eaec82abd2 Disconnect swaybg instead of killing it
This is much more reliable. This also fixes race conditions when killing swaybg
while it's doing a wl_display_roundtrip.
2019-02-18 15:11:48 -05:00
emersion d2456c3b37 Remove unused header include/sway/tree/output.h 2019-02-18 15:11:48 -05:00
Brian Ashworth 19586ab768 Fix reload freeze when not modsetting current mode
This fixes the issue of the display freezing on reload with
wlroots#1545.

On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.

However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.

This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
2019-02-18 15:11:48 -05:00
Ian Fan 47abc45e86 swaybar: prevent signal handler from firing during termination
This prevents a heap-use-after-free crash when sway terminates.
2019-02-18 15:11:48 -05:00
emersion 06e03ed878 Rebase cursor when a layer surface maps
Also removes an extraneous arrange_outputs call, it's already called if
necessary in arrange_layers.

Updates https://github.com/swaywm/sway/issues/3080
2019-02-18 15:11:48 -05:00
Brian Ashworth 4272bf1274 seat_cmd_cursor: do not create non-existing seat
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.

This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
2019-02-11 10:15:00 -05:00
Brian Ashworth ebe5399ed6 pointer_constraint: change to a seat subcommand
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.

This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
2019-01-31 22:58:52 -05:00
v44r 204e1f4712 Rebase #1636 against current master 2019-01-31 15:37:57 +01:00
Drew DeVault a6d41254c9 Add pointer_constraint command 2019-01-30 19:53:59 +01:00
absrd ee4b8a3938 Add relative pointer 2019-01-30 19:53:59 +01:00
Las cedde21c96 Implement pointer-constraints-unstable-v1 2019-01-30 19:53:59 +01:00
Brian Ashworth f0fd6119cf Cleanup config reading failure error logs
This cleans up the log when sway fails to read a config file. The
following changes have been made:
- A missing error message has been added to the log when the config file
is a directory instead of a regular file
- In main, `goto` statements have been added after the `sway_terminate`
calls instead of wrapping every block in `if (!terminate_request)`
- Unnecessary NULL-checks around calls to free in `main` have been
removed
- Deferred command execution has been extracted to a separate function
and the `Running deferred commands` log message will not be shown when
there are no deferred commands.
2019-01-29 13:18:53 -05:00
Ryan Dwyer 6b8bf10941 Introduce container_is_scratchpad_hidden
Just a convenience function that improves readability of the code.

Other things worth noting:

* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
2019-01-28 10:35:40 +01:00
Ryan Dwyer 0a9ff774ad Center surface inside container when it's too small
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.

Example clients that have this behaviour are emersion's hello-wayland
and weston.

It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.

The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.

For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
2019-01-28 01:17:21 -05:00
Drew DeVault 783fadab28
Merge pull request #3423 from RyanDwyer/fullscreen-global
Implement fullscreen global
2019-01-27 18:06:50 -05:00
emersion a452f8f822
Update for swaywm/wlroots#1503 2019-01-27 12:59:46 +01:00
Ryan Dwyer 20aa8ee67d Implement fullscreen global 2019-01-25 08:29:21 +10:00
emersion 75406bb93b Update for swaywm/wlroots#1402 2019-01-24 11:48:19 +01:00
Jan Beich ba96983bf0 Make json-c include respect pkg-config --cflags
json-c.pc contains `Cflags: -I${includedir}/json-c`, so `<json-c/json.h>`
won't be found unless the parent directory is searched by default.
2019-01-23 21:50:06 -05:00
Ian Fan de9a357de8 util.c: remove numlen function
Its uses have been replaced by snprintf, which is more in line with its usage.
2019-01-22 13:10:25 +01:00
Ryan Dwyer 2301349ad5 Use noop output when there's no outputs connected
Instead of having NULL workspace->output pointers, use a noop output.
This should be safer.
2019-01-22 09:55:13 +01:00
M Stoeckl 4b1eaaf731 Removed unused wlroots dependency for sway(bg|bar|msg|nag)
Also remove direct libm dependency where unused.
2019-01-21 13:04:15 -05:00
M Stoeckl d7ff776552 Move sway-specific functions in common/util.c into sway/
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
2019-01-21 12:39:16 -05:00
M Stoeckl 1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
emersion a737d7ecc4
Better handle outputs without CRTC
This happens if you plug in more outputs than supported by your GPU.

This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
2019-01-18 10:09:10 +01:00
emersion dc1eac0cf1 output: remove output_add_listeners
Simplify the code by registering signals when outputs are created and removing
signals when they are destroyed.
2019-01-18 10:08:34 +01:00
emersion f951c2357f
Remove unicode.c 2019-01-17 12:45:41 +01:00
emersion b29d19bf0d
Remove swaylock headers 2019-01-17 10:26:42 +01:00
Brian Ashworth 02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Ryan Dwyer 2024f1da72 Resize only current and immediate siblings rather than all siblings
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.

To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.

During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.

In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.

container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
2019-01-15 08:01:21 +10:00
Brian Ashworth 2573606b60 Disarm key repeat on reload
When resetting the keyboard during reload, disarm the key repeat on all
keyboards since the bindings (and possibly keyboard) will be freed before
the key repeat can go off.
2019-01-14 20:15:23 +01:00
M Stoeckl 2a684cad5f Remove now-unused "input" argument of cmd_results_new
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.

String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
2019-01-14 08:05:29 -05:00
M Stoeckl 6d392150a7 Remove 'input' field of IPC command return json
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
2019-01-14 07:58:02 -05:00
Drew DeVault 4879d40695
Merge pull request #3144 from emersion/cmd-xwayland
Add xwayland command
2019-01-13 20:42:39 -05:00
Drew DeVault 81bb675274
Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improved
Improve mouse button parsing: bar mouse bindings
2019-01-13 20:41:05 -05:00
Drew DeVault 9f9ef76175
Merge pull request #3343 from RedSoxFan/seat-cursor-buttons-improved
Improve mouse button parsing: seat cursor buttons
2019-01-13 20:40:42 -05:00
Drew DeVault 23ab56bbf7
Merge pull request #3402 from RyanDwyer/refactor-seatops
Refactor seat operations to use an interface
2019-01-13 20:38:34 -05:00
Drew DeVault 08569aab36
Merge pull request #3388 from RedSoxFan/reset-inputs-on-reload
reload: reset input configs
2019-01-13 20:37:05 -05:00
Drew DeVault 9ce4d53e78
Merge pull request #3408 from RedSoxFan/bar-padding
swaybar: adjustable status padding
2019-01-13 20:34:13 -05:00
Brian Ashworth 50d36ef238 swaybar: allow identifiers for output and tray
This allows `bar output` and `bar tray_output` to specify an output
identifier. Output names should still work as well.

This parses the output identifier from the xdg_output description,
which wlroots currently sets to `make model serial (name)`. Since this
could change in the future, all identifier comparisons are guarded by
NULL-checks in case the description cannot be parsed to an identifier.
2019-01-13 12:06:35 -05:00
Brian Ashworth ca0a75d540 swaybar: add status_edge_padding command
This adds the bar subcommand `status_edge_padding <padding>` to set the
padding used when the status line is on the right edge of the bar.
2019-01-11 00:12:24 -05:00
Brian Ashworth c0f92cb2fb swaybar: add status_padding command
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
2019-01-11 00:07:58 -05:00
Robinhuett 33d9de88ef swaylock: Add caps lock state to indicator
Implements customization for the indicator as proposed in #2788 with comments from #3367 in mind.
The default behaviour does not change exept for the caps lock text color.
2019-01-10 16:14:18 -05:00
Brian Ashworth 3d6440ec26 bar_cmd_bind: utilize mouse button helpers
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.

This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.

This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
2019-01-10 12:43:10 -05:00
Brian Ashworth aa1c838f97 seat_cmd_cursor: utilize mouse button helpers
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when
parsing mouse buttons for the `press` and `release` operations. All x11
buttons, button event names, and button event codes are supported.
For x11 axis buttons, `dispatch_cursor_axis` is used instead of
`dispatch_cursor_button`. However the `press`/`release` state is ignored
and the either axis event is processed. This also removes support for
`left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
2019-01-10 11:47:34 -05:00
Ryan Dwyer ed5aafd90b Refactor seat operations to use an interface
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.

The move_tiling_threshold operation has been merged into move_tiling.

The main logic for each operation is untouched aside from variable
renames.

The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
2019-01-10 22:04:42 +10:00
Brian Ashworth eefa6b1ad3 bind{code,sym}: utilize mouse button helpers
This modifies `bindcode` and `bindsym` to use `get_mouse_bindcode` and
`get_mouse_bindsym`, respectively, to parse mouse buttons. Additionally,
the `BINDING_MOUSE` type has been split into `BINDING_MOUSECODE` and
`BINDING_MOUSESYM` to match keys and allow for mouse bindcodes to be
used. Between the two commands, all button syms and codes should be
supported, including x11 axis buttons.
2019-01-09 11:29:04 -05:00