Commit graph

421 commits

Author SHA1 Message Date
Antonin Décimo 3af52d86f7 Fix memory leaks 2019-08-12 09:42:11 +09:00
Antonin Décimo c1a5f61622 Remove unused variable 2019-08-02 20:55:49 +03:00
Brian Ashworth f5d1c27226 swaybar-protocol.7: fix block border descriptions
This corrects the description of border_{top,bottom,left,right} in the
block properties table in swaybar-protocol.7. The values should be an
integer denoting the width/height rather than a boolean denoting
whether to show them.
2019-06-28 10:34:09 +03:00
Daniel Eklöf b4b274cdce check for empty string before calling strtoul() and check errno
Note: since strtoul() has no real error return code (both 0 and
ULONG_MAX may be returned on both success and failure), set errno=0
before calling strtoul().
2019-06-05 14:40:29 -04:00
Daniel Eklöf 900d3287f9 swaybar/nag: use xcursor theme defined by XCURSOR_THEME/SIZE
If the XCURSOR_THEME and/or XCURSOR_SIZE environment variables are
set, use the theme and size they define.

If they're not set, use the same defaults as before (system default
theme, size=24).
2019-06-05 14:40:29 -04:00
Brian Ashworth c3532bc8a1 Add swaybar protocol documentation
This adds swaybar-protocol.7.scd documenting the swaybar status line
protocol including some differences from the i3bar counterpart.
2019-05-30 10:54:23 -04:00
Brian Ashworth dc7a3930a7 swaybar: add multiseat support
This just adds multiseat support to swaybar
2019-04-24 07:16:37 -06:00
Brian Ashworth 583ceff6f6 swaybar: hide mode visibility improvements
This allows swaybar to become visible when the mode changes (to any
mode other than the default). swaybar will be hidden again when the
modifier is pressed and released or when switching back to the default
mode.

This also applies the same logic to visible by urgency to hide swaybar
when the modifier is pressed and released.

These changes are to match i3's behavior.
2019-04-24 07:14:48 -06:00
Maxime “pep” Buquet 20762ecb3c Validate icon_struct in read_theme_file
The read_theme_file function used to return an invalid icon_struct in
some cases, for example when an empty index.theme file was read.

This makes sure the struct we're returning is always valid as per the
Icon Theme specification.

Signed-off-by: Maxime “pep” Buquet <pep@bouah.net>
2019-04-20 16:41:02 -04:00
Dmitri Kourennyi 4b892a79aa Add margin to short_text handling.
Add a 3xscale margin matching other spacing in swaybar as part of short
text width calculations
2019-04-04 14:14:08 -06:00
Dmitri Kourennyi 94dc57f3c5 Ensure predicted position for short text handling doesn't overflow.
- Predicted status line can be negative, so corresponding variables should
  not be unsigned. Changed to double as position is actually calculated as
  double.
2019-04-04 14:14:08 -06:00
Dmitri Kourennyi 0553e75b53 Implement handling of short_text field of i3 input protocol.
Matches i3bar behavior of setting all blocks to use the short_text if the full
text width does not fit.
2019-04-04 14:14:08 -06:00
Alex Maese 31eeda11b0 Fix a crash in swaybar when an icon dir is not readable 2019-03-30 20:13:34 +02:00
Stephan Hilb d64e8ba946 swaybar: fix loading of malformed icon theme
If the icon index.theme contained a key-value pair without a preceding
group header, entry_handler() would be called with a zero pointer and
lead to a segfault.
Set the error flag and break on such malformed files.
2019-03-13 22:04:04 -06:00
emersion bcde298a71 Fix size_t temporary underflow in log_loaded_themes
`len` will underflow but will overflow right after, so it's not as bad as it
may appear. Still better not to under/overflow at all.

Fixes https://github.com/swaywm/sway/issues/3862
2019-03-11 12:12:46 -04:00
Ian Fan 5c8424c074 stringop.c: remove unused functions
The only use of `join_list` in swaybar/tray/icon.c has been rewritten.
2019-03-11 14:42:58 +01:00
Ian Fan 416c6ecb99 tray: fix pixmap colors
by converting from network byte order to host byte order
2019-02-28 18:31:52 +01:00
Milkey Mouse 2f7247e08a swaybar: add overlay mode (fix #1620)
Overlay mode puts the bar above normal windows and passes through/ignores any
touch/mouse/keyboard events that would be sent to it.
2019-02-24 20:05:47 -05:00
Drew DeVault d1588e3739 swaybar: cycle workspaces on touch drag 2019-02-23 20:00:20 +01:00
Drew DeVault 4599907de7 swaybar: process hotspots on touch tap 2019-02-23 20:00:20 +01:00
Ian Fan f54077dbca tray: fix memory leaks 2019-02-16 21:49:16 +01:00
Ian Fan 26d6360feb tray: when a service is lost, remove all matching items
Before, only the first matching item would be removed, which could leave
stale items.
2019-02-16 21:49:16 +01:00
Ian Fan d3c527220a tray: use correct parameter to set bus slot to floating
Counter-intuitively, `sd_bus_slot_set_floating` expects 0 to set it to
floating.
2019-02-15 15:15:45 +00:00
Ian Fan 5484f308b9 swaybar: prevent signal handler from firing during termination
This prevents a heap-use-after-free crash when sway terminates.
2019-02-15 14:09:14 +00:00
Drew DeVault bbfe13a248
Merge pull request #3551 from c-edw/RevertDoubleFrees
Revert double frees.
2019-02-03 09:55:54 +01:00
Stefan Schick 0952c9f91d Fix #3445: swaybar tray inerited thems not processed 2019-02-01 21:47:28 -05:00
Connor E 2f2a887377 Revert "More frees."
This reverts commit eda1bf769f.
2019-02-01 11:52:37 +00:00
Connor E 49b667272b Revert "Add some missing frees."
This reverts commit b5d95f264d.
2019-02-01 11:51:03 +00:00
v44r 204e1f4712 Rebase #1636 against current master 2019-01-31 15:37:57 +01:00
Jan Beich ba96983bf0 Make json-c include respect pkg-config --cflags
json-c.pc contains `Cflags: -I${includedir}/json-c`, so `<json-c/json.h>`
won't be found unless the parent directory is searched by default.
2019-01-23 21:50:06 -05:00
Drew DeVault 8b056cfc82
Merge pull request #3500 from progandy/validate_pixmaps
swaybar: fix crash with some tray icon pixmaps
2019-01-23 09:21:08 -05:00
Lukas Lihotzki f7ed97e2a7 Fix tray icon updates
Apparently, IconThemePath needs to be reread on NewIcon signal.
This fixes tray icon updates in electron apps with libappindicator-gtk3.
2019-01-23 13:08:43 +01:00
progandy dcabe0e6da swaybar: fix crash with some tray icon pixmaps
Discard pixmaps for icons where width and height are 0 or not equal.

Fixes #3487
2019-01-23 00:04:00 +01:00
Brian Ashworth 9e6c6ce332 swaybar: fix command malloc in workspace command
This fixes a typo on the malloc line in ipc_send_workspace_command. The
plus one to the size for the null-terminator was outside of the malloc
call, which was causing the incorrect pointer to be freed later in the
function.
2019-01-22 20:10:19 +01:00
Ian Fan d8f3e6e19a swaybar: fix workspace command
Escape quotes and backslashes, allowing switching to workspace names
like "1" (including quotes) and \
2019-01-22 18:48:33 +01:00
M Stoeckl 0af5b26e41 Fix dead stores found by scan-build
In addition to removing unused code, two minor problems are fixed:
 (1) `resize set` and `resize adjust` did not error when given
too many arguments.
 (2) `orientation` was incorrectly overridden to be 'U' for
scroll events in the swaybar tray `handle_click` function.
2019-01-22 10:12:04 -05:00
Ian Fan de9a357de8 util.c: remove numlen function
Its uses have been replaced by snprintf, which is more in line with its usage.
2019-01-22 13:10:25 +01:00
M Stoeckl 4b1eaaf731 Removed unused wlroots dependency for sway(bg|bar|msg|nag)
Also remove direct libm dependency where unused.
2019-01-21 13:04:15 -05:00
Ian Fan 410c961388 swaybar: fix setting floating watcher slots 2019-01-21 16:05:15 +01:00
M Stoeckl 1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
M Stoeckl 695948e689 Fix memory leaks in swaybar 2019-01-19 08:42:52 +01:00
emersion bb2f007ad3
meson: remove rpath options 2019-01-18 08:26:44 +01:00
emersion 08a5b304e4
Use Meson feature options 2019-01-17 18:26:24 +01:00
Connor E 70637b40fe Fixes for small existing bugs. 2019-01-16 13:02:26 +01:00
Connor E aa9d7d8ca1 Remove usage of VLAs. 2019-01-16 13:02:26 +01:00
Brian Ashworth 02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Drew DeVault 81bb675274
Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improved
Improve mouse button parsing: bar mouse bindings
2019-01-13 20:41:05 -05:00
Drew DeVault fc93cd20dc
Merge pull request #3397 from RedSoxFan/fix-swaybar-height
swaybar: obey height if given
2019-01-13 20:36:08 -05:00
Drew DeVault 9ce4d53e78
Merge pull request #3408 from RedSoxFan/bar-padding
swaybar: adjustable status padding
2019-01-13 20:34:13 -05:00
Brian Ashworth 50d36ef238 swaybar: allow identifiers for output and tray
This allows `bar output` and `bar tray_output` to specify an output
identifier. Output names should still work as well.

This parses the output identifier from the xdg_output description,
which wlroots currently sets to `make model serial (name)`. Since this
could change in the future, all identifier comparisons are guarded by
NULL-checks in case the description cannot be parsed to an identifier.
2019-01-13 12:06:35 -05:00
Brian Ashworth ca0a75d540 swaybar: add status_edge_padding command
This adds the bar subcommand `status_edge_padding <padding>` to set the
padding used when the status line is on the right edge of the bar.
2019-01-11 00:12:24 -05:00
Brian Ashworth c0f92cb2fb swaybar: add status_padding command
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
2019-01-11 00:07:58 -05:00
Brian Ashworth 3d6440ec26 bar_cmd_bind: utilize mouse button helpers
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.

This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.

This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
2019-01-10 12:43:10 -05:00
Brian Ashworth 124085eba9 swaybar: obey height if given
If there is a bar height given, use that as the height rather than as a
minimum height. This matches i3-gaps behavior.
2019-01-09 20:58:00 -05:00
Brian Ashworth 39873bc1f0 swaybar: fix rendering of border and background
This fixes the rendering of borders and backgrounds for blocks. This
also makes the following changes:
* both borders and padding are scaled with the output
* both lines and rectangles are rendered without an antialiasing to
avoid bleeding outside the desired area
2019-01-09 20:28:30 -05:00
Jan Beich 0a4c4f3e52 Simplify evdev includes on FreeBSD by relying on up-to-date package
evdev-proto is installed by a dependency, so some files have been missed:

  In file included from ../sway/input/cursor.c:3:
  /usr/local/include/libevdev-1.0/libevdev/libevdev.h:30:10: fatal error: 'linux/input.h' file not found
  #include <linux/input.h>
	   ^~~~~~~~~~~~~~~
  ../swaybar/i3bar.c:3:10: fatal error: 'linux/input-event-codes.h' file not found
  #include <linux/input-event-codes.h>
	   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-01-09 11:02:05 +00:00
Ian Fan f87628e2ab swaybar: improve tray logging 2019-01-08 16:03:16 +00:00
Ian Fan d093c3ac55 swaybar: handle SNI signals better
This fixes a crash caused by callbacks not matching the right sender,
and frees old values later, before they are re-assigned.
2019-01-08 12:18:59 +00:00
Ian Fan b666fc76a6 swaybar: free the right item during tray destruction
Also added a comment to make more obvious the reason for comparing
sni->status[0] == 'N'
2019-01-08 12:17:53 +00:00
Ian Fan a82b8a3c14 Remove readline.c
All occurrences of read_line have been replaced by getline.
peek_line has been absorbed into detect_brace.
2019-01-01 09:01:25 +00:00
Ian Fan 9e31f5d79c swaybar: use KDE's SNI IconThemePath property 2018-12-31 20:40:18 +00:00
Ian Fan 371089f62c swaybar: handle new and lost StatusNotifierWatcher 2018-12-31 20:40:18 +00:00
Ian Fan 8ffb7f0529 swaybar: draw a sad face if SNI has no icon 2018-12-31 20:40:18 +00:00
Ian Fan f33b5c5223 swaybar: do not create tray if hidden 2018-12-31 20:40:18 +00:00
Ian Fan 2fd41fe9c8 swaybar: set bar dirty on SNI event 2018-12-31 20:40:18 +00:00
Ian Fan 6becde0246 swaybar: implement mouse events for tray 2018-12-31 20:40:18 +00:00
Ian Fan fa2c5282c1 swaybar: implement tray rendering 2018-12-31 20:40:18 +00:00
Ian Fan 6b03c68775 swaybar: implement tray config 2018-12-31 20:40:18 +00:00
Ian Fan 74655f835a swaybar: add StatusNotifierItem to tray 2018-12-31 20:40:18 +00:00
Ian Fan e6cb55e2f8 swaybar: add StatusNotifierHost to tray 2018-12-31 20:40:18 +00:00
Ian Fan 746600e6ed swaybar: implement icon themes and lookup for tray 2018-12-31 20:40:18 +00:00
Ian Fan 02df3f67aa swaybar: add StatusNotifierWatcher to tray 2018-12-31 20:40:18 +00:00
Ian Fan ef555012fa swaybar: add skeleton dbus code to tray 2018-12-31 20:40:18 +00:00
Ian Fan 5f65f33989 swaybar: add tray interface 2018-12-31 20:40:18 +00:00
Mack Straight 828060af73 swaybar: fix double free
status->text should not be freed here. There are two scenarios:

* status->text has been set to an error by status_error. In this case
  the value shouldn't be freed because it's always a reference to a
  constant.
* status->text has been set to status->buffer because the bar is in
  text protocol mode. In this case it's a double free because the
  buffer is already freed after.
2018-12-31 01:19:14 -05:00
Brian Ashworth 35a82a8693 swaybar: fix cursor scale
This fixes a few issues with swaybar's cursor scaling:
1. The cursor scale is now changed when the output scale changes
2. The cursor scale is no longer bound by the max output scale when
swaybar is launched
3. Related to the previous item, the cursor is no longer tiny on low
scale outputs after the max output scale has changed

This also bumps up `wl_compositor` to version 4 to allow usage of
`wl_surface_damage_buffer`.
2018-12-15 09:26:50 +01:00
Brian Ashworth 549d9fe489 swaybar: fix sep block width for mixed scales
When there are outputs with mixed scales, it was possible for swaybar to
alter `block->separator_block_width` for an output with a higher scale,
and use the changed value for a lower scale output. This caused there to
be larger than normal separation between blocks on the lower scale
outputs. The issue is more obvious the larger the scale difference
between the highest scale output and the lowest scale output.

This fixes the issue by using a local variable that is originally set to
`block->separator_block_width` for rendering, but if it needs to be
increased, the local variable is the only thing touched.
2018-12-12 10:23:57 +01:00
Brian Ashworth 8b4fe7dd15 swaybar: handle block->urgent
When `block->urgent` is set, use the urgent colors. This matches i3bar's
behavior. Previously, swaybar just ignored the property.

This also adds in rendering for right borders, which was missing.
2018-12-12 10:17:39 +01:00
Hristo Venev 24e8ba048a Add relative coordinates in JSON for i3bar click events
Compatibility with i3 commit 161db6f17d734ac9deb0a20e81b78d4b2a92ce68.
2018-12-04 12:49:21 +02:00
Brian Ashworth 1bd8463481 Implement bar gaps
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
2018-11-28 11:24:14 -05:00
emersion 3a310f92ab
Replace _XOPEN_SOURCE with _POSIX_C_SOURCE
And make sure we don't define both in the same source file.
2018-11-25 17:19:43 +01:00
emersion bf7af9c690
Merge pull request #3083 from c-edw/feature/StripWorkspaceName
Implement strip_workspace_name.
2018-11-19 17:56:18 +01:00
Connor E 4bd46fb079 Implement strip_workspace_name. 2018-11-17 16:11:28 +00:00
Connor E eda1bf769f More frees. 2018-11-13 14:42:00 +00:00
Connor E b5d95f264d Add some missing frees. 2018-11-13 13:45:01 +00:00
Ian Fan 19421373b9 swaybar: when scrolling, check that there are workspaces to scroll on 2018-10-25 14:12:26 +01:00
Ian Fan c5541763c0 swaybar: fix scrolling behaviour
1. wrap_scroll has been fixed
2. release bindings are checked when returning early
2018-10-25 12:57:16 +01:00
Ian Fan c3fdabb725 swaybar: reverse order of workspaces list
This makes it congruent with its visual appearance, making it easier to
reason about.
2018-10-25 12:57:16 +01:00
Drew DeVault 41f744c224
Merge pull request #2925 from ianyfan/swaylock
swaylock: exit early if unable to get input inhibitor
2018-10-24 18:54:22 +02:00
Ian Fan 48cf430cee swaybar: absorb bar_init function into bar_setup 2018-10-23 12:25:52 +01:00
Ian Fan 9afcda59db swaybar: exit on display error 2018-10-23 12:22:51 +01:00
Ryan Dwyer 851b442f73 Fix swaybar crash when there's no status_command 2018-10-23 18:38:01 +10:00
emersion 2a32701b78
swaybar: fix hotplug 2018-10-21 17:46:40 +02:00
Ian Fan 1844a5bafb swaybar: render with minimum height, nominally text height 2018-10-20 21:21:57 +01:00
Ryan Dwyer a4ce5227c2 Put swaybar in overlay layer when using mode hide
This allows the bar to render over fullscreen views.
2018-10-20 16:48:43 +10:00
Rouven Czerwinski f52825336c swaybar: disallow left and right position and print error on default
The positions "left" and "right" are not allowed by the man page, remove them
from the allowed positions. Also print an error to stderr if we default to the
bottom position.

Fixes #2878
2018-10-20 08:21:44 +02:00
ossi.ahosalmi 79011e68df missing headers for swaybar/input.c 2018-10-19 15:55:30 +03:00
Ian Fan 499150a91b swaybar: separate input code to new file 2018-10-18 14:19:00 +01:00
Ryan Dwyer 32ba8154b8 Sway clients: Exit gracefully when compositor is unavailable 2018-10-15 21:57:59 +10:00
Ryan Dwyer 6921fdc6d6 Remove timerfd from loop implementation
timerfd doesn't work on the BSDs, so this replaces it with a timespec
for the expiry and uses a poll timeout to check the timers when needed.
2018-10-15 00:26:27 +10:00