Aaron Ouellette
133009b652
add a manpage for swaylock
2016-03-01 10:23:45 -05:00
Drew DeVault
79bfd620d6
Merge pull request #495 from gpyh/docswaybar
...
Segregate between config and runtime cmds in doc
2016-02-29 16:46:12 -05:00
Yacine Hmito
9437eca3eb
Segregate between config and runtime cmds in doc
...
In anticipation for #375 , reorganized and augmented slightly sway(5)
so it makes a difference between commands intended for configuration,
commands intended for control, and those that can serve as both.
2016-02-29 22:12:39 +01:00
Drew DeVault
cc170e1b2d
Merge pull request #497 from progandy/swaylock-arrange
...
swaylock: call arrange_windows for floating change
2016-02-28 15:42:23 -05:00
progandy
33887e3955
sway: rearrange the whole ws on lock view setup
2016-02-28 21:24:12 +01:00
progandy
52ff89cecc
sway: set lock view to floating after ws switch
...
This avoids calling swayc_active_workspace.
2016-02-28 21:22:57 +01:00
Drew DeVault
86b894d804
Merge pull request #496 from mikkeloscar/focus-new-output
...
Correctly move focus from one output to a new one.
2016-02-28 12:32:56 -05:00
Mikkel Oscar Lyderik
6088c6cdf0
Correctly move focus from one output to a new one.
...
This patch aims to correctly handle moving focus <left|right|up|down>
between outputs.
For instance, if moving from one output to a new output at the left of
the current one, it should focus the right-most view/container on the
new output, and the opposite if moving from right to left. This should
happen regardless of the previously stored focus of the new output.
This also handles moving to a new output above or below the current one.
2016-02-28 18:20:18 +01:00
Drew DeVault
3453910c3e
Merge pull request #492 from mikkeloscar/swaybar-multi-output
...
Display single swaybar on multiple outputs
2016-02-27 16:18:50 -05:00
Mikkel Oscar Lyderik
67bbcceba1
Free config before exiting sway.
...
Apart from freeing the sway_config struct, this also terminates the
swaybars spawned by sway, since they are linked by PID to the bar config
structs.
2016-02-27 22:13:15 +01:00
Mikkel Oscar Lyderik
e15a8a0376
Improve how swaybars are spawned
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
af7a251806
Poll before wl_display_dispatch
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
e4c1176b72
Differentiate between all or no outputs
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
212c6a18a2
Add outputs to bar_config ipc response
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
bad4e22f3b
Make sway spawn only one bar per bar config
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
6d57f03028
Make single bar handle multiple outputs
2016-02-27 22:12:35 +01:00
Mikkel Oscar Lyderik
5ff3fb1c04
Set pointer pos before focusing view under it
2016-02-27 13:18:55 +01:00
Mikkel Oscar Lyderik
e19e32cf81
Make protocol specifications follow the DTD
...
Gets rid of these warnings:
WARNING: XML failed validation against built-in DTD
2016-02-27 01:26:17 +01:00
Mikkel Oscar Lyderik
5e253fdd9a
Correctly exit sway on errors.
...
Calling `exit` in sway_terminate prevents sway from correctly shutting
down (freeing data, cleanly terminating the ipc server, etc.).
A better way is to exit straight away if the failure occurs before
`wlc_run` and use sway_abort as usual if it occur when wlc is running.
2016-02-26 09:42:21 +01:00
Drew DeVault
40b3215444
Merge pull request #494 from gpyh/argsegfault
...
Fix segfault when trying to use sway as IPC without a sway instance
2016-02-25 18:09:20 -05:00
Yacine Hmito
c400ca8f88
Fix for when sway_abort doesn't exit
...
sway_terminate does an exit in case wlc_terminate doesn't
2016-02-25 23:46:27 +01:00
Yacine Hmito
8db417fafe
Fixed swaymsg command name in sway(5) doc
2016-02-25 23:05:38 +01:00
Yacine Hmito
e239fbbd88
No options when using sway as IPC client
...
Sway used to attempt sending an IPC command composed of every argument
after the first non-option argument encountered.
Now, raises an error if an option is encountered before the intended command.
Some options such as -h or -v take effect when parsing, so they still
apply.
2016-02-25 23:04:59 +01:00
Yacine Hmito
179192e222
Removed p as a valid CLI option
...
The get-socketpath long option had an undocumented short alternative
as `p`. It has been removed.
However, the code in the options array is still the 'p' char.
2016-02-25 21:50:24 +01:00
Drew DeVault
28c8e4fb9e
Merge pull request #493 from mikkeloscar/view-behind-swaylock
...
Don't rearrange views behind swaylock.
2016-02-25 09:02:47 -05:00
Mikkel Oscar Lyderik
89bb6a4a42
Don't rearrange views behind swaylock.
...
Fix #481
2016-02-25 14:42:48 +01:00
Mikkel Oscar Lyderik
c9d9dd7516
Check for empty ws on view destroyed.
...
In some cases destroying a view can result in an empty and inactive
workspace, which should be destroyed.
This handles those cases.
2016-02-25 13:36:25 +01:00
Mikkel Oscar Lyderik
ee32bc3aef
Send workspace ICP event on ws destroy/empty.
...
There is no 'destroy' change type in the i3 IPC so this uses `empty` to
notify about empty workspaces (which will be destroyed from sway right
after).
2016-02-25 12:59:22 +01:00
Mikkel Oscar Lyderik
739ba902e0
Prevent crash when showing scratchpad on new ws.
...
Fix #469
2016-02-25 11:43:07 +01:00
Mikkel Oscar Lyderik
b107fc6e5a
Fix ipc event bit masks
2016-02-21 22:49:20 +01:00
Mikkel Oscar Lyderik
016a77424a
Prefer named output config over wildcard config.
...
This makes sure that a named output config is applied before the
general wildcard config when a new output is created. This ensures that
the config:
output * ...
output NAME ...
behaves the same way as:
output NAME ...
output * ...
2016-02-12 13:45:47 +01:00
Drew DeVault
91d6113d4a
Merge pull request #488 from mikkeloscar/get-pixels
...
Replace deprecated function wlc_output_get_pixels.
2016-02-08 07:40:41 -05:00
Mikkel Oscar Lyderik
6f7cbf2eac
Replace deprecated function wlc_output_get_pixels.
...
This makes IPC GET_PIXELS use the new `wlc_pixels_read` call instead of
the deprecated `wlc_output_get_pixels`.
The old version worked by passing a callback function to wlc which would
grab the pixels and send them to the IPC client.
The new version works by maintaining a list of clients who have
requested the pixels of some output and then grap and send the pixels in
the output_post_render hook of the `wlc_interface`.
2016-02-08 12:39:07 +01:00
Mikkel Oscar Lyderik
be6455b295
Squash trailing whitespace
2016-02-08 12:31:13 +01:00
Mikkel Oscar Lyderik
bacd40d6db
Fix clang warnings
2016-02-08 12:30:42 +01:00
Drew DeVault
4546ce1188
Add wlc-render.h to handlers.c
2016-02-08 12:20:24 +01:00
Mikkel Oscar Lyderik
6038bf5924
Merge pull request #486 from SethBarberee/sway-zsh
...
refactored sway command to include single dash
2016-02-08 11:36:21 +01:00
Seth Barberee
4cb30880ca
fixed config help
2016-02-01 14:53:45 -06:00
Seth Barberee
aa06ee4fbd
refactored to include single dash
2016-01-31 22:39:08 -06:00
Mikkel Oscar Lyderik
6793648f8e
use tabs
2016-01-29 03:24:21 +01:00
Mikkel Oscar Lyderik
10e50b690a
Improve _swaymsg and _swaygrab completions
2016-01-29 03:06:13 +01:00
Mikkel Oscar Lyderik
34948c7ee1
Autocomplete scale options
2016-01-29 02:48:48 +01:00
Mikkel Oscar Lyderik
25361fa67a
complete image, not color
2016-01-29 02:45:01 +01:00
Mikkel Oscar Lyderik
65a03ab502
Add files completion to _swaylock
2016-01-29 02:42:50 +01:00
Mikkel Oscar Lyderik
a64e281356
Merge pull request #483 from aouelete/zsh-swaylock-completion
...
zsh completions for swaylock
2016-01-29 02:30:25 +01:00
Aaron Ouellette
7ac0fbe8e3
zsh completions for swaylock
2016-01-28 20:20:15 -05:00
Drew DeVault
533e59f7b1
Merge pull request #482 from crondog/movemouse
...
commands: move position mouse
2016-01-28 07:57:46 -05:00
Drew DeVault
e5bb08cc18
Print /proc/<pid>/maps on segfault
2016-01-28 07:57:07 -05:00
crondog
7916eb70b9
commands: move position mouse
...
Bounds checking works ok except it overlaps the bar. Just like with
normal floating. Should be fixed once swaybar is fixed.
2016-01-28 22:10:56 +11:00
Drew DeVault
a6e57dd7ac
Merge pull request #480 from crondog/swaylocktrans2
...
swaylock: Allow for transparent color values
2016-01-27 22:12:05 -05:00