2.7 KiB
Structure
{
"outbounds": [
{
"type": "wireguard",
"tag": "wireguard-out",
"server": "127.0.0.1",
"server_port": 1080,
"local_address": [
"10.0.0.1",
"10.0.0.2/32"
],
"private_key": "YNXtAzepDqRv9H52osJVDQnznT5AM11eCK3ESpwSt04=",
"peer_public_key": "Z1XXLsKYkYxuiYjJIkRvtIKFepCYHTgON+GwPq7SOV4=",
"pre_shared_key": "31aIhAPwktDGpH4JDhA8GNvjFXEf/a6+UaQRyOAiyfM=",
"mtu": 1408,
"network": "tcp",
"detour": "upstream-out",
"bind_interface": "en0",
"bind_address": "0.0.0.0",
"routing_mark": 1234,
"reuse_addr": false,
"connect_timeout": "5s",
"tcp_fast_open": false,
"domain_strategy": "prefer_ipv6",
"fallback_delay": "300ms"
}
]
}
!!! warning ""
WireGuard is not included by default, see [Installation](/#installation).
WireGuard Fields
server
==Required==
The server address.
server_port
==Required==
The server port.
local_address
==Required==
List of IP (v4 or v6) addresses (optionally with CIDR masks) to be assigned to the interface.
private_key
==Required==
WireGuard requires base64-encoded public and private keys. These can be generated using the wg(8) utility:
wg genkey
echo "private key" || wg pubkey
peer_public_key
==Required==
WireGuard peer public key.
pre_shared_key
WireGuard pre-shared key.
mtu
WireGuard MTU. 1408 will be used if empty.
network
Enabled network
One of tcp udp.
Both is enabled by default.
Dial Fields
detour
The tag of the upstream outbound.
Other dial fields will be ignored when enabled.
bind_interface
The network interface to bind to.
bind_address
The address to bind to.
routing_mark
!!! error ""
Linux only
The iptables routing mark.
reuse_addr
Reuse listener address.
connect_timeout
Connect timeout, in golang's Duration format.
A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h".
domain_strategy
One of prefer_ipv4 prefer_ipv6 ipv4_only ipv6_only.
If set, the server domain name will be resolved to IP before connecting.
dns.strategy will be used if empty.
fallback_delay
The length of time to wait before spawning a RFC 6555 Fast Fallback connection.
That is, is the amount of time to wait for IPv6 to succeed before assuming
that IPv6 is misconfigured and falling back to IPv4 if prefer_ipv4 is set.
If zero, a default delay of 300ms is used.
Only take effect when domain_strategy is prefer_ipv4 or prefer_ipv6.