Commit graph

6825 commits

Author SHA1 Message Date
Simon Ser 83389da583
Log which output is using direct scan-out 2020-11-16 13:53:49 +01:00
Brian Ashworth 9d6787d10d input/keyboard: fix Group# bindings for keyboard groups
The keyboard group's effective keyboard layout was never being changed
due to a condition that incorrectly preventing it from being performed.
The IPC event that follows the change was correctly being prevented.
2020-11-12 10:52:45 +01:00
Tudor Brindus 07042486c3 tree/container: introduce container_is_sticky[_or_child] functions
To query whether a container is sticky, checking `con->is_sticky` is
insufficient. `container_is_floating_or_child` must also return true;
this led to a lot of repetition.

This commit introduces `container_is_sticky[_or_child]` functions, and
switches all stickiness checks to use them. (Including ones where the
container is already known to be floating, for consistency.)
2020-11-11 20:43:58 -05:00
Simon Ser a56098a24e
Add missing includes for wlr_input_device.h
References: https://github.com/swaywm/wlroots/pull/2470
2020-11-11 15:40:50 +01:00
Simon Ser bb342ac5e6
Replace wlr_key_state with wl_keyboard_key_state
References: https://github.com/swaywm/wlroots/pull/2446
2020-11-11 11:00:55 +01:00
Simon Ser 5ae4f65045
build: bump wlroots dependency to 0.12.0 2020-11-08 15:15:34 +01:00
Tudor Brindus 0df5753aed input/seatop_default: consider fullscreen views to have no edges
Previously, `find_edge` on a single fullscreen view would occasionally
return an edge rather than `WLR_EDGE_NONE`. This would trigger entry
into `seatop_resize_tiling`, which doesn't have meaning for a fullscreen
view.

The result was that the fullscreen container hitbox was considered to be
that of where it'd be if it were tiling, so most clicks would not go
through.

Fixes #5792.
2020-11-05 12:25:15 +01:00
heitor b42ed32041 fix typo 2020-11-05 08:36:59 +01:00
heitor 3a78edd93a update portuguese README (fix typos, update informations...) 2020-11-05 08:36:59 +01:00
Tudor Brindus c523aa623b input: fully change focus when scrolling tabs/stacks
When scrolling on a tabbed/stacked container, i3 focuses its
inactive-focused focused child. Sway does the same, but then resets the
focus to whatever was focused previously.

Ref e5992eed16/src/click.c (L207-L219)
2020-11-01 04:05:38 -05:00
Tudor Brindus 60d95414d4 commands/focus: force container warp when fulfilling focus mode_toggle
This commit switches focusing behavior to force a warp when executing
`focus mode_toggle`.

Fixes #5772.
2020-11-01 03:43:00 -05:00
Tudor Brindus 8c12e71a66 input: remove motion deltas from seatop callbacks
Straightforward cleanup, they haven't been used for a while.
2020-10-31 23:15:32 +01:00
Tamir Zahavi-Brunner 96578aa91e hide_cursor: Add an option to hide when typing
Add an option for the `hide_cursor` command to hide the cursor when
typing, i.e. whenever a key is pressed.
2020-10-30 09:59:54 +01:00
mwenzkowski 4799cb0960 output: Revert implementation of evacuate_sticky()
The function evacuate_sticky() was changed in commit 32788a93 to be used
by workspace_for_each_container() to make the code more readable. But I
overlooked that it is not safe to use workspace_for_each_container() to
remove container from a workspace. This commit restores the previous
implementation for evacuate_sticky().
2020-10-28 09:45:12 -04:00
Dimitris Triantafyllidis 39328ca4e4 In container_split, set a floating container's view to tiled
Currently, when a floating container with a view is split and
children are added to it, the new views are rendered as tiled,
while the first view stays in floating style.

Here this is addressed by setting the view to tiled as soon
as the container is split, by duplicating the "view part" of
the logic in container_set_floating(..., false). Since the new
container of the view is no longer considered floating, it
makes sense to set the view to tiling at this point.

The view would have to be set back to floating if it was possible
to "unsplit" the container.
2020-10-28 00:36:33 -04:00
mwenzkowski 32788a93f2 output: evacuate sticky containers only if new output has a workspace
Sticky floating containers on an otherwise empty workspace can only be
evacuated if the new output has an active workspace. The noop output may
not have one and in that case we have to move the whole workspace to the
new output.
2020-10-27 19:26:26 -04:00
Dimitris Triantafyllidis 0cb9282aee Smart borders fix: always show borders for floating containers
Currently, in view_autoconfigure, the only condition for show_border
is !view_is_only_visible. view_is_only_visible does not cross the
boundary between the workspace's tiling and floating lists and does not
differentiate between them.

The result is, that in a workspace with zero or more tiling containers
and a single floating container, the floating container will lose its
borders as soon as it is split, provided that a only one view is visible
within the floating container.

Fixed by adjusting the condition for show_borders.
2020-10-25 21:59:40 -04:00
mwenzkowski 13a67da614 container: Fix NULL pointer dereference
Reset the workspace layout to the output's default only if the workspace
is actually attached to an output.

Fixes #5762
2020-10-24 19:40:25 -04:00
Ronan Pigott d06c1ac1e9 commands/move: fix crash when moving sphsc child 2020-10-24 02:15:30 -04:00
Daniel De Graaf 1be66c98f2 commands/resize: don't consider 1px resizes to be invalid
A "resize shrink width 1px" will cause grow_x to be 0 while grow_width is -1,
incorrectly rejecting the command even though the resize is not a noop.  Fix
this by checking width/height instead of x/y.
2020-10-22 09:10:10 +02:00
Ronan Pigott 9e272a7986 tiling_resize: abandon resize if a sibling con dies 2020-10-20 20:23:50 +02:00
Tudor Brindus cc8d318aa1 transaction: make transaction collapsing smarter with > 2 views
Sway maintains a list of pending transactions, and tries to merge
consecutive transactions applying to the same views into one. Given
a pending transactions list on views {A, B, C} of:

  A -> A' -> A'' -> B -> B' -> B''

Sway will collapse the transactions into just A'' -> B''. This works
fine when doing things like resizing views by their border. However,
when interactively resizing layouts like H[V[A B] C], we end up with
pending transaction lists like:

  A -> B -> C -> A' -> B' -> C' -> A'' -> B'' -> C''

Previously, Sway would not be able to simplify this transaction list,
and execute many more transactions than would be necessary (the final
state is determined by {A'', B'', C''}).

After this commit, the transaction list gets simplified to A'' -> B'' ->
C'', resolving performance problems (that were particularly noticeable
with high-refresh-rate mice).

Fixes #5736.
2020-10-19 01:40:10 +02:00
Tudor Brindus 8355884fbd transaction: validate X transaction completions by geometry, not size
Xwayland views are aware of their coordinates, so validating transaction
completions should take into account the reported coordinates of the
view. Prior to this commit they didn't, and matching dimensions would
suffice to validate the transaction.

Also introduced `transaction_notify_view_ready_immediately` to support
the fix from d0f7e0f without jumping through hoops to figure out the
geometry of an `xdg_shell` view.
2020-10-18 22:37:42 +02:00
Tudor Brindus 5bd6a5ce3f transaction: don't reconfigure X views unless integral coords changed
Sway logical coordinates are doubles, but they get truncated to integers
when sent to Xwayland through `xcb_configure_window`. X11 apps will not
respond to duplicate configure requests (from their truncated point of
view) and cause transactions to time out.

Fixes #5035.
2020-10-18 22:12:16 +02:00
Ronan Pigott 33affb33d2 tiling_drag: emit window move ipc events 2020-10-18 21:56:35 +02:00
Tudor Brindus 181798c2fe xwayland: listen to set_geometry event
Closes #5735, refs #3007.

This makes the "Search everywhere" dialog in JetBrains IDEs movable.
2020-10-18 15:18:53 +02:00
Ronan Pigott 5bcbc0b4a9 seat: use default output mapping if there is no input config 2020-10-16 18:34:09 +02:00
Ludvig Michaelsson d6ac30753d swaybar: don't expand separator_block_width if separator is false
When swaybar receives the following JSON body

    [
        {
            "full_text": "foo",
            "separator": false,
            "separator_block_width": 0
        },
        {
            "full_text": "bar"
        }
    ]

it should not draw any separator or any space between the two blocks.
However, since swaybar calculates that separator_block_width
0 is too small to fit any configured separator, it will override the
separator_block_width with some non-zero value. This patch changes
that such that the necessary separator_block_width is only expanded if
the block has 'separator: true'.

This should be in line to what i3 does, as its documentation of the
i3bar protocol for separator states that "[...] if you disable the
separator line, there will still be a gap after the block, unless you
also use separator_block_width".
2020-10-12 16:02:41 +02:00
Tudor Brindus ed247c031c input/tablet: add tool_mode option to set tablet tools as relative input
Closes #4139.
2020-10-12 15:01:37 +02:00
Tudor Brindus 136add4e12 input/cursor: default tablet lens tool to relative motion
It is recommended that mouse and lens cursor tool default to relative
mode and all pen-like tools to absolute mode.

Refs
https://wayland.freedesktop.org/libinput/doc/1.11.3/tablet-support.html#tablet-relative-motion.
2020-10-12 15:01:37 +02:00
Tarmack 989123a2a5 Add support for workspace_min_width bar option. 2020-10-11 19:12:42 +02:00
Tobias Langendorf 657587964e xwayland: support views that change override-redirect status 2020-10-10 09:53:41 +02:00
Tudor Brindus 392d4808c3 commands/move: fix single-split escaping on move
Prior to this commit, having a layout like T[app1 V[app2]], focusing
app2, and then doing `move left` would result in T[app2 app1]. Now, the
resulting layout is T[app1 app2], which matches i3 behavior.

`container_flatten` updates `container->parent`, meaning that the
existing check would never be true.
2020-10-04 21:02:35 -04:00
Tudor Brindus bc239b2f6b desktop/render: show indicators for top-level split
i3 shows indicators for the workspace-level pseudo-split, but Sway does
not, as of b977c02. This commit replaces the floating container check
with a call to `container_is_floating`, which has some more robust
checks in place.

Fixes #5699.
2020-10-04 20:54:58 -04:00
David96 c150177a94 Make focus_follows_mouse work when hovering a layer-shell surface on another output
Fixes #5668
2020-09-26 17:42:14 -04:00
John Mako 4537c8b3d4 check parent surface before it is destroyed 2020-09-19 21:31:31 +02:00
Rouven Czerwinski 41999d7c9f cursor: update hide timer during config apply
We can't arm the timer during cursor creation since the config may not
be ready yet. Instead arm the timer while applying the input
configuration, by this time the configuration has been parsed and we can
arm the hide timer.

Fixes #5686
2020-09-16 07:53:57 +02:00
Geoffrey Casper 65a751a21f server: Avoid using "wayland-0" as WAYLAND_DISPLAY
See https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/486
2020-09-16 00:14:20 +02:00
Jonas Hohmann 7aea4692b0 Fix minor typos in German README 2020-09-15 09:55:48 +02:00
Rouven Czerwinski 299a159add cursor: arm cursor hide timer immediately
According to the wayland docs, wayland timers are disarmed on creation.
This leads to the cursor not being hidden if there is no activity after
creation, since the timer is armed on activity, but not at creation.
Arm the timer after creation to ensure the cursor is hidden even if
there is no cursor activity after creation.

Fixes #5684
2020-09-15 09:55:30 +02:00
Tudor Brindus 2efecc14ef input/pointer: update cursor activity after updating button counts
Otherwise, Sway will not re-hide a cursor after the last button has been
released.

Needed alongside afa890e to fix #5679.
2020-09-14 22:28:21 -04:00
Mustafa Abdul-Kader eb1c09030e swaynag: add details background option
Adds a new config option for details background for swaynag

issue/#5673
2020-09-14 22:13:01 -04:00
Rouven Czerwinski afa890e8e9 input/cursor: reset event source after unhide
Reset the event source after unhiding the cursor, to ensure that the
timeout starts after showing the cursor. Also remove the open coded
variant in seat_consider_warp_to_focus().

Fixes #5679
2020-09-14 18:14:08 -04:00
BrassyPanache 7ca9ef12f8 Re-focus on parent surface if it is available
My primary issue was IntelliJ IDEA's code suggestion pop-up not returning focus
to the active editing window.

I have spent some time looking at the changes of @Xyene (#5398) and
@RyanDwyer (#2103). I think my proposed change maintains the status
quo for the most part whilst fixing my focus issue.

I have verified that @Xyene's fix for IntelliJ sub-menus still works.

I have done basic testing which consists of:

- Chrome
- IntelliJ IDEA 2020.2.1
- VSCode
- Alacritty

It seems to hold up. I at least didn't see any obvious errors.

Relates to #3007
2020-09-04 17:00:22 -04:00
oliver-giersch a543fa35ff swaynag: adds option to separately specify the text color for buttons 2020-09-04 18:17:42 +02:00
Érico Rolim 08095e99f3 swaymsg.1: expand tip for multi-word strings.
Strings with commas inside, such as the ones used for
xkb_{config,layout} commands, count as multi-word strings.
2020-09-04 12:37:12 +02:00
Brian Ashworth 2ea5d2985a input/libinput: remove input type property bias
This changes it so all libinput config options are set on any device
that supports it. Previously, only a subset of libinput config options
were being considered depending on the input type. Instead of trying to
guess which properties the device may support, attempt to set any
configured property regardless of the device type. All of the functions
already have early returns in them for when the device does not actually
support the property. This brings the configuration side inline with
describe_libinput_device for the IPC side. This change was prompted
by a tablet tool showing the calibration matrix property in the IPC
message, but not being able to actually change it since that property
was only being considered for the touch input type.
2020-09-03 10:46:06 +02:00
Simon Ser 2c76923282 Use wlr_output_event_commit
Instead of listening to both transform and scale events, we can listen
to the commit event and use the new wlr_output_event_commit struct to
decide what to do.

This de-duplicates some of the work we were doing twice when an output
was re-configured.

Depends on [1].

[1]: https://github.com/swaywm/wlroots/pull/2315
2020-08-27 13:57:10 -06:00
Konstantin Pospelov fd216b3a81 exec: fix validation during config reload
Split cmd_exec_always into separate methods for general validation and
process creation. This fixes a potential call of join_args with 0 arguments.
2020-08-24 09:41:54 +02:00
Simon Ser 6991ac8c70 Handle SIGINT
Gracefully exit on SIGINT, like we do for SIGTERM.
2020-08-11 18:37:11 -04:00