Commit graph

1162 commits

Author SHA1 Message Date
Ian Fan d093c3ac55 swaybar: handle SNI signals better
This fixes a crash caused by callbacks not matching the right sender,
and frees old values later, before they are re-assigned.
2019-01-08 12:18:59 +00:00
emersion 140bc2dd5b
Merge pull request #3275 from ianyfan/remove-readline
Rewrite strip_whitespace and remove readline.c
2019-01-08 10:05:37 +01:00
Rouven Czerwinski fde900861a cursor: move unhide and timeout retrieval into separate functions
The unhide and timeout retrieval functions are needed in a later commit. No
functional changes.
2019-01-07 10:30:19 -05:00
Brian Ashworth 5bf4daf263 Implement tiling_drag_threshold
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
2019-01-02 23:33:33 +01:00
Ian Fan a82b8a3c14 Remove readline.c
All occurrences of read_line have been replaced by getline.
peek_line has been absorbed into detect_brace.
2019-01-01 09:01:25 +00:00
Ian Fan 967566e37f stringop.c: rewrite strip_whitespace 2019-01-01 09:01:24 +00:00
Ian Fan 9e31f5d79c swaybar: use KDE's SNI IconThemePath property 2018-12-31 20:40:18 +00:00
Ian Fan f33b5c5223 swaybar: do not create tray if hidden 2018-12-31 20:40:18 +00:00
Ian Fan 2fd41fe9c8 swaybar: set bar dirty on SNI event 2018-12-31 20:40:18 +00:00
Ian Fan 6becde0246 swaybar: implement mouse events for tray 2018-12-31 20:40:18 +00:00
Ian Fan fa2c5282c1 swaybar: implement tray rendering 2018-12-31 20:40:18 +00:00
Ian Fan 6b03c68775 swaybar: implement tray config 2018-12-31 20:40:18 +00:00
Ian Fan 74655f835a swaybar: add StatusNotifierItem to tray 2018-12-31 20:40:18 +00:00
Ian Fan e6cb55e2f8 swaybar: add StatusNotifierHost to tray 2018-12-31 20:40:18 +00:00
Ian Fan 746600e6ed swaybar: implement icon themes and lookup for tray 2018-12-31 20:40:18 +00:00
Ian Fan 02df3f67aa swaybar: add StatusNotifierWatcher to tray 2018-12-31 20:40:18 +00:00
Ian Fan 5f65f33989 swaybar: add tray interface 2018-12-31 20:40:18 +00:00
Ian Fan 598e950296 swaybar: remove old tray implementation 2018-12-31 20:40:18 +00:00
Brian Ashworth 4d88c95790 hide_cursor: change to a seat subcommand
This makes hide_cursor a seat subcommand, which allows for seat specific
timeouts.
2018-12-30 14:17:24 +01:00
Brian Ashworth 09bb71f650 Verify seat fallback settings on reload
This fixes an issue where on reload, all input devices that were added
via an implicit fallback to the default seat would be removed from the
default seat and applications would crash due to the seat having no
capabilities.

On reload, there is a query for a seat config with the fallback setting
set (it can either be true or false). If no such seat config exists, the
default seat is created (if needed) and has the implicit fallback true
applied to its seat config. This is the same procedure that occurs when
a new input is detected.
2018-12-30 14:12:36 +01:00
Brian Ashworth 3e8f548d1d Revamp seat configs
This makes seat configs work like output and input configs do. This also
adds support for wildcard seat configs. A seat config is still created
in the main seat command handler, but instead of creating a new one in
the subcommands and destroying the main seat command's instance, the
seat subcommands modify the main one. The seat config is then stored,
where it is merged appropriately. The seat config returned from
`store_seat_config` is then applied. When attempting to apply a wildcard
seat config, a seat specific config is queried for and if found, that is
used. Otherwise, the wildcard config is applied directly.

Additionally, instead of adding input devices to the default seat
directly when there is no seat configs, a seat config for the default
seat is created with only fallback set to true, which is more explicit.
It also fixes an issue where running a seat command at runtime (with no
seat config in the sway config), would result in all input devices being
removed from the default seat and leaving sway in an unusable state.

Also, instead of checking for any seat config, the search is for a seat
config with a fallback option seat. This makes it so if there are only
seat configs with fallback set to -1, the default seat is still created
since there is no explicit notion on what to do regarding fallbacks.
However, if there is even a single fallback 0, then the default seat is
not used as a fallback. This will be needed for seat subcommands like
hide_cursor where the user may only want to set that property without
effecting anything else.
2018-12-29 19:40:40 +01:00
Brian Ashworth ae8937b11a Add failure reply on IPC_SYNC
Since it was decided that sway will not support IPC_SYNC, just return
`{'success': false}` as a reply
2018-12-29 17:07:26 +01:00
Brian Ashworth 3248c823ed Split image_surface handling into own function 2018-12-25 13:31:56 +01:00
Brian Ashworth 5fca74a1f1 Implement hide_cursor <timeout> command
Allows the cursor to be hidden after a specified timeout in
milliseconds
2018-12-25 13:31:56 +01:00
Brian Ashworth a223030b70 Change mouse buttons to x11 map and libevdev names
This modifies the way mouse bindings are parsed. Instead of adding to
BTN_LEFT, which results in button numbers that may not be expected,
buttons will be parsed in one of the following ways:

1. `button[1-9]` will now map to their x11 equivalents. This is already
the case for bar bindings. This adds support for binding to axis events,
which was not possible in the previous approach.

2. Anything that starts with `BTN_` will be parsed as an event code name
using `libevdev_event_code_from_name`. This allows for any button to be
mapped to instead of limiting usage to the ones near BTN_LEFT. This also
adds a dependency on libevdev, but since libevdev is already a dependency
of libinput, this should be fine. If needed, this option can have dependency
guards added.

Binding changes:
- button1: BTN_LEFT -> BTN_LEFT
- button2: BTN_RIGHT -> BTN_MIDDLE
- button3: BTN_MIDDLE -> BTN_RIGHT
- button4: BTN_SIDE -> SWAY_SCROLL_UP
- button5: BTN_EXTRA -> SWAY_SCROLL_DOWN
- button6: BTN_FORWARD -> SWAY_SCROLL_LEFT
- button7: BTN_BACK -> SWAY_SCROLL_RIGHT
- button8: BTN_TASK -> BTN_SIDE
- button9: BTN_JOYSTICK -> BTN_EXTRA

Since the axis events need to be mapped to an event code, this uses the
following mappings to avoid any conflicts:
- SWAY_SCROLL_UP: KEY_MAX + 1
- SWAY_SCROLL_DOWN: KEY_MAX + 2
- SWAY_SCROLL_LEFT: KEY_MAX + 3
- SWAY_SCROLL_RIGHT: KEY_MAX + 4
2018-12-25 13:27:08 +01:00
Brian Ashworth 88d96bc41f Combine output_by_name and output_by_identifier
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
2018-12-20 19:55:29 +01:00
Brian Ashworth 35a82a8693 swaybar: fix cursor scale
This fixes a few issues with swaybar's cursor scaling:
1. The cursor scale is now changed when the output scale changes
2. The cursor scale is no longer bound by the max output scale when
swaybar is launched
3. Related to the previous item, the cursor is no longer tiny on low
scale outputs after the max output scale has changed

This also bumps up `wl_compositor` to version 4 to allow usage of
`wl_surface_damage_buffer`.
2018-12-15 09:26:50 +01:00
Brian Ashworth 1897edabba Rework default output configs
Default output configs were generated on reload to reset an output to
its default settings. The idea was that anything that was removed from
the config or changed at runtime and not in the config should be reset
on reload. Originally, they were created using the output name. Recently,
they were changed to use the output identifier. It turns out that there
are issues of shadowing with that solution as well. This should fix
those issues.

Instead of generating the default output configs on reload and storing
them in the output config list to merge on top of, they are now only
generated when retrieving the output config for an output during a
reload. This means that the default output configs are never stored
anywhere and just used as a base to merge unaltered user configs on top
of during a reload.

Starting with a blank output config, merges get applied in the following
order:
1. Default output config (only during a reload)
2. Wildcard config (only if neither output name or output identifier
exist)
3. Output name config
4. Output identifier config
2018-12-13 18:37:25 +01:00
Ian Fan 98c1e19466 list.c: rename free_flat_list to list_free_items_and_destroy 2018-12-09 01:15:38 +00:00
Ian Fan 19e831ed3d list.c: Remove list_foreach
Most occurrences have been replaced by `free_flat_list` which has been
moved from stringop.c to list.c. The rest have been replaced by for loops.
2018-12-09 00:37:50 +00:00
Hristo Venev 24e8ba048a Add relative coordinates in JSON for i3bar click events
Compatibility with i3 commit 161db6f17d734ac9deb0a20e81b78d4b2a92ce68.
2018-12-04 12:49:21 +02:00
Brian Ashworth 1bd8463481 Implement bar gaps
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
2018-11-28 11:24:14 -05:00
Brian Ashworth e5f90f25d7 Introduce a way to show config warnings in swaynag
Adds the function `config_add_swaynag_warning(char *fmt, ...)` so that
handlers can add warnings to the swaynag config log in a uniform way.
The formatting is identical to errors and include the line number, line,
and config path.

This also alters the background file access warning to use the function
and introduces a warning for duplicate bindings.
2018-11-28 11:09:01 -05:00
emersion b98563d2d7
Fix segfault when destroying unmapped child view 2018-11-28 14:08:20 +01:00
Ryan Dwyer f737854e30
Merge pull request #3199 from emersion/handle-subsurface-destroy
Handle destroyed subsurfaces
2018-11-28 20:46:22 +10:00
emersion c931a13af9
Merge pull request #3207 from RedSoxFan/swaynag-no-term-buttons
Implement swaynag -B/--button-no-terminal
2018-11-28 09:44:26 +01:00
Brian Ashworth 673da83260 Implement swaynag -B/--button-no-terminal
In `i3 4.16`, `i3-nagbar` introduces the flags `-B/--button-no-terminal`
to run the action directly instead of inside a terminal. This implements
the flags for swaynag for compatibility.

Since swaynag does not use an equivalent to `i3-sensible-terminal`, the
flags `-b/--button` only uses a terminal when the environment variable
`TERMINAL` is set, otherwise it acts the same as these new flags.
2018-11-27 23:34:51 -05:00
Brian Ashworth 5c6f3d7266 Change execute_command to return a list of results
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
2018-11-27 21:42:09 -05:00
emersion fc79b7c2d2
Handle destroyed subsurfaces
Damage subsurfaces when they are destroyed. Since subsurfaces don't have an
unmap event we need to do that on destroy.

We also don't want to keep a sway_view_child when the wlr_subsurface has been
destroyed.

Fixes https://github.com/swaywm/sway/issues/3197
2018-11-27 11:46:30 +01:00
Brian Ashworth e6562c8cd2 Implement title alignment
This adds support for `i3 4.16`'s ability to set the title alignment.
The command is `title_align left|center|right`.

When the title is on the right, marks are moved to the left. Otherwise,
they are on the right.
2018-11-25 22:08:58 -05:00
Florent de Lamotte 7555c7efdc Adding commands for configuring titlebar borders and padding 2018-11-22 10:30:04 +01:00
emersion bf7af9c690
Merge pull request #3083 from c-edw/feature/StripWorkspaceName
Implement strip_workspace_name.
2018-11-19 17:56:18 +01:00
emersion 311c7db7e3
Add xwayland command 2018-11-19 17:38:37 +01:00
Spencer Michaels 70bc4c3ab6 Add scroll factor config option. 2018-11-18 13:49:30 -05:00
emersion cad851805b
Use #if instead of #ifdef 2018-11-18 00:33:06 +01:00
Connor E 4bd46fb079 Implement strip_workspace_name. 2018-11-17 16:11:28 +00:00
Ryan Dwyer be9348d25c Move view {x,y,width,height} into container struct
This renames/moves the following properties:

* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
    * This is required to support placeholder containers as they don't
    have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
    * To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
    * The con prefix was there to give it contrast from the view
    properties, and is no longer useful.

The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
2018-11-17 21:29:42 +10:00
emersion 2afd930914
Use #if instead of #ifdef for WLR_HAS_* 2018-11-12 22:23:06 +01:00
Brian Ashworth 12876932a9 Allow multiple outputs for workspace output
`i3 4.16` allows users to list multiple outputs for a workspace and the
first available will be used. The syntax is as follows:
`workspace <workspace> output <outputs...>`

Additionally when the workspace is created, the outputs get added to the
output priority list in the order specified. This ensures that if a higher
output gets connected, the workspace will move to the higher output. This
works the same way as if the user had a workspace on an output, disconnected
the output, and then later reconnected the output.
2018-11-11 11:22:38 -05:00
Ryan Dwyer aad2f444f0
Merge pull request #3087 from RedSoxFan/side-gaps
Implement per side and per direction outer gaps
2018-11-08 22:41:14 +10:00
Brian Ashworth 9e8aa39530 Implement per side and per direction outer gaps
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`

`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.

Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.

Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
2018-11-07 22:44:11 -05:00
Brian Ashworth 6a42643784 gaps: remove duplicate inner gaps 2018-11-07 22:42:18 -05:00
Connor E 4a21981855 Add focus_follows_mouse always. (#3081)
* Add focus_follows_mouse_mode.

* Fail if focus_follows_mouse is invalid.

* Fix indentation.
2018-11-06 21:58:08 +01:00
Drew DeVault c18cd9dd03
Merge pull request #3021 from Snaipe/singlekey-binding-trigger
binding: match single-key bindings if no multi-key binding matched
2018-11-03 17:57:59 +01:00
Ryan Dwyer 9fc736f4e1 Move view marks properties to container struct
Like border properties, this will be needed to implement layout saving
and restoring.
2018-11-01 18:09:51 +10:00
Drew DeVault 480b03b734
Merge pull request #3040 from RyanDwyer/border-props-to-container
Move view border properties to container struct
2018-11-01 01:03:41 +01:00
Ryan Dwyer bf19f63a79 Wrap to fartherest output when running focus output
Also moves the `opposite_direction` function into `util.c` as it's used
in two places now.
2018-11-01 08:29:45 +10:00
Ryan Dwyer 528c7495bb Move view border properties to container struct
This will be needed to implement layout saving and restoring, as we need
to be able to configure borders on a placeholder container which has no
view.
2018-10-31 23:56:20 +10:00
madblobfish 1f23ec2d05 Revert "Add resolve_path() to utils"
This reverts commit c9694ee63d.
2018-10-31 13:04:08 +01:00
Ryan Dwyer 7be309710d Remove enum movement_direction
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.

As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
2018-10-30 23:27:49 +10:00
Franklin "Snaipe" Mathieu f8e83ee20a binding: match single-key bindings if no multi-key binding matched
This makes bindings more snappy when the user is typing faster than
his keycaps are releasing.

Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
2018-10-29 13:04:19 +00:00
Robinhuett 0a4cf4748d Use output identifier for workspace config 2018-10-27 15:56:06 +02:00
Ryan Dwyer 60a1d79de7 Rebase the cursor after applying transactions
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.

There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
2018-10-25 23:37:40 +10:00
Drew DeVault ea2497d35c
Merge pull request #2950 from emersion/presentation-time
Implement the presentation-time protocol
2018-10-25 15:31:47 +02:00
Drew DeVault 46fc4ba4e3
Merge pull request #2957 from RyanDwyer/rebase-cursor-after-map
Rebase the cursor after mapping a view
2018-10-24 15:45:47 +02:00
Ryan Dwyer 17bb39cd49 Add multiseat support to swaylock 2018-10-24 22:04:16 +10:00
Ryan Dwyer bdae625cb3 Rebase the cursor after mapping a view
I originally put the rebase at the end of view_map, but at this point
the view is still at its native size and will ignore the motion event if
it falls outside of its native size. The only way to do this properly is
to rebase the cursor later - either after sending the configure, after
the view commits with the new size, or after applying the transaction. I
chose to do it after applying the transaction for simplicity.

I then attempted to just call cursor_rebase after applying every
transaction, but this causes crashes when exiting sway (and possibly
other places) because cursor_rebase assumes the tree is in a valid
state.

So my chosen solution introduces transaction_commit_dirty_with_callback
which allows handle_map to register a callback which will run when the
transaction is applied.
2018-10-24 19:38:52 +10:00
Drew DeVault bdb176863c
Merge pull request #2933 from Snaipe/xwayland-window-properties
xwayland: populate window_properties in json for views
2018-10-24 01:13:15 +02:00
emersion a654ac1bd6
Implement the presentation-time protocol 2018-10-23 23:38:57 +02:00
Franklin "Snaipe" Mathieu 8fc9328334 xwayland: populate window_properties in json for views
window_properties is documented to contain a subset of the X11 properties
of a window (its title, class, instance, role, and transient ID). This
commit adds the missing json object from the get_tree output for
xwayland windows only.

This is a follow-up of #2911.

Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
2018-10-23 19:10:50 +01:00
Ian Fan 9227cb7d67 commands: replace EXPECTED_LESS_THAN with EXPECTED_AT_MOST
This makes it a bit more obvious what the expected number of arguments is.
2018-10-23 10:51:54 +01:00
Ian Fan 5364255f26 commands: remove EXPECTED_MORE_THAN
Its uses have been replaced with EXPECTED_AT_LEAST.
2018-10-23 10:17:58 +01:00
Ryan Dwyer 6deb726873 Fix crash when quitting a QT app on the wayland backend using menu
QT unmaps the view before destroying the popup. We destroyed the popup
in response to the view unmapping, but then we'd attempt to destroy it a
second time which caused a crash.

The patch removes the listener.

I tested it with GTK as well, and can confirm the popup is still being
destroyed.
2018-10-22 18:36:47 +10:00
Christian 989bddc765 Parse missing i3 window types
fixes the parsing part of #2906
2018-10-21 15:59:04 +02:00
Ryan Dwyer c5a6c37275 Make workspace back_and_forth seat-specific
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
2018-10-21 11:26:22 +10:00
Ryan Dwyer b9b1b0e566 Remove raise_floating directive
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.

There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
2018-10-20 17:51:32 +10:00
Ryan Dwyer c006717910 Minor refactor of input manager
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.

On a similar note:

* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.

Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.

Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
2018-10-20 13:11:43 +10:00
Ryan Dwyer 9ea71f292b Introduce cursor_rebase
This function "rebases" the cursor on top of whatever is underneath it,
without triggering any focus changes.
2018-10-19 22:47:54 +10:00
Ryan Dwyer 4d743b64d0 Fix logic used for mouse_warping output
Turns out we don't need to store the previous focus, and it should be
based on which output the cursor was in.
2018-10-19 22:28:02 +10:00
Drew DeVault 96e3686ae8
Merge pull request #2875 from RedSoxFan/input-device-bindings
cmd_bind{sym,code}: Implement per-device bindings
2018-10-19 14:00:03 +02:00
Ryan Dwyer a2fdac2c4b Consider cursor warp when switching workspaces
Fixes a regression introduced in
24a90e5d86.

consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
2018-10-19 08:00:13 +10:00
Brian Ashworth 2e637b7368 cmd_bind{sym,code}: Implement per-device bindings
bindsym --input-device=<identifier> ...
bindcode --input-device=<identifier> ...
2018-10-18 13:42:01 -04:00
Ian Fan 499150a91b swaybar: separate input code to new file 2018-10-18 14:19:00 +01:00
Ryan Dwyer 24a90e5d86 Remove cursor warping from seat_set_focus
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.

To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
2018-10-18 23:08:45 +10:00
Drew DeVault 765c80e5f7
Merge pull request #2820 from Emantor/fix-mouse-warping-container
Fix mouse warping container
2018-10-17 15:57:13 +02:00
Rouven Czerwinski 0969bf758b cursor: functions to warp cursor to container and workspace
The new functions allow a cursor to be warped without changing the focus.
This is a preparation commit to handle cursor warping not only in
seat_set_focus_warp.
2018-10-16 15:47:02 +02:00
Rouven Czerwinski 892446a0b6 view: move arrange_workspace into view_map
For mouse_warping cursor to correctly work on newly spawned containers,
the workspace needs to be arranged before the cursor is warped.

The shell functions each implement their own fullscreen and arrange checks,
move them into the view_map function and pass their states via boolean arguments.

Fixes #2819
2018-10-16 15:47:02 +02:00
Ryan Dwyer 05284b65db Prevent duplicate workspace::focus events
Previously we would compare the last focus's workspace with the new
focus's workspace to determine if we need to emit an IPC
workspace::focus event. This doesn't work when moving the focused
container to a new workspace.

This adds a workspace property to the seat which stores the last emitted
workspace::focus workspace. Using this method, after moving the
container, refocusing it will trigger exactly one workspace::focus
event: from the old workspace to the new workspace.
2018-10-16 08:17:24 +10:00
Ryan Dwyer 26278b694c Introduce seat_set_raw_focus and remove notify argument from seat_set_focus_warp
This introduces seat_set_raw_focus: a function that manipulates the
focus stack without doing any other behaviour whatsoever. There are a
few places where this is useful, such as where we set focus_inactive
followed by another call to set the real focus again. With this change,
the notify argument to seat_set_focus_warp is also removed as these
cases now use the raw function instead.

A bonus of this is we are no longer emitting window::focus IPC events
when setting focus_inactive, nor are we sending focus/unfocus events to
the surface.

This also fixes the following:

* When running `move workspace to output <name>` and moving the last
workspace from the source output, the workspace::focus IPC event is no
longer emitted for the newly created workspace.
* When splitting the currently focused container, unfocus/focus events
will not be sent to the surface when giving focus_inactive to the newly
created parent, and window::focus events will not be emitted.
2018-10-15 21:06:24 +10:00
Ryan Dwyer c6f153d8f9 Event loop: Fix memmove and remove extraneous declaration 2018-10-15 00:26:27 +10:00
Ryan Dwyer 6921fdc6d6 Remove timerfd from loop implementation
timerfd doesn't work on the BSDs, so this replaces it with a timespec
for the expiry and uses a poll timeout to check the timers when needed.
2018-10-15 00:26:27 +10:00
Ryan Dwyer f98f351a52 swaylock: Don't wait too long for surface damage before verifying 2018-10-15 00:26:27 +10:00
Ryan Dwyer fa11b7f701 swaylock: clear password after 10 seconds 2018-10-15 00:26:27 +10:00
Ryan Dwyer c242712262 swaylock: Remove indicator after 3 seconds 2018-10-15 00:26:27 +10:00
Ryan Dwyer 9c833c661a swaylock: Use common event loop 2018-10-15 00:26:27 +10:00
Ryan Dwyer 4056c09e13 Move swaybar's event loop to common directory and refactor
* The loop functions are now prefixed with `loop_`.
* It is now easy to add timers to the loop.
* Timers are implemented using pollfd and timerfd, rather than manually
checking them when any other event happens to arrive.
2018-10-15 00:26:27 +10:00
Ian Fan a29ee77411 swaybar: send signal to status when hiding or showing bar 2018-10-14 13:33:12 +01:00
Ian Fan f6f72cb949 swaybar: show hidden bar on urgency 2018-10-14 13:33:12 +01:00
Ian Fan 2f1fd80726 swaybar: show hidden bar on key event
Since wayland does not currently allow swaybar to create global
keybinds, this is handled within sway and sent to the bar using a custom
event, so as not to pollute existing events, called bar_state_update.
2018-10-14 13:33:12 +01:00
Ian Fan bcc61e5147 swaybar: handle mode/hidden_state changes
As well as adding the hidden_state property to the bar config struct,
this commit handles barconfig_update events when the mode or
hidden_state changes, and uses a new function determine_bar_visibility
to hide or show the bar as required, using, respectively,
destroy_layer_surface, which is also newly added, and add_layer_surface,
which has been changed to allow dynamically adding the surface.
2018-10-14 13:33:12 +01:00