* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
The new upstream is https://github.com/swaywm/swaybg
This commit also refactors our use of gdk-pixbuf a bit, since the only
remaining reverse dependency is swaybar tray support.
This allows swaybar to become visible when the mode changes (to any
mode other than the default). swaybar will be hidden again when the
modifier is pressed and released or when switching back to the default
mode.
This also applies the same logic to visible by urgency to hide swaybar
when the modifier is pressed and released.
These changes are to match i3's behavior.
This revamps the type configs for swaynag. All sizing attributes for
swaynag are now `ssize_t` instead of `uint32_t` to allow for a default
value of `-1`, which allows for `0` to be a valid value. Additionally,
the initialization of the type configs has been changed from a simple
calloc to use a new function `swaynag_type_new`. `swaynag_type_new`
calloc's the memory, checks for an allocation failure, sets the name,
and all sizes to -1. The layering order has also been changed to
default, general config, type config, and as highest priority command
line arguments. Finally, `swaynag_type_merge` has been modified to
handle the layering and sizing changes.
This adds a 3 second timeout to the initial reply in swaymsg. This
prevents swaymsg from hanging when `swaymsg -t get_{inputs,seats}` is
used in i3. The timeout is removed when waiting for a subscribed event
or monitoring for subscribed events.
This also adds type checks to commands where i3 does not reply with all
of the properties that sway does (such as `modes` in `get_outputs`).
This is mostly just a behavioral adjustment since swaymsg should run on
i3. When running under i3, some command reply's (such as the one for
`get_outputs) may have more useful information in the raw json than the
pretty printed version.
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.
swaymsg is also updated to reflect the new touchpad type.
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.
This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
scratchpad, it will be fullscreen when shown (and fullscreen disabled
when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
scratchpad, it will be shown immediately as fullscreen global. The
container is not moved to a workspace and remains in the
scratchpad. The container will be visible until fullscreen disabled
or killed. Since the container is in the scratchpad, running
`scratchpad show` or `move container to scratchpad` will have no
effect
This also changes `container_replace` to transfer fullscreen and
scratchpad status.
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.
If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.
If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
This matches i3's behavior of setting scratchpad containers to 50% of
the workspace's width and 75% of the workspace's height, bound by the
minimum and maximum floating width/height.
This fixes a crash in `container_init_floating` when a xwayland view
sends a configure request while in the scratchpad.
`container_init_floating` gets called so the configured minimum and
maximum sizes gets respected when resizing to the requested size. Since
the workspace was NULL, it would SIGSEGV when attempting to get the
workspace's output for the output box retrieval.
This extracts the resizing portion of `container_init_floating` into a
separate function. If the container is in the scratchpad, it will just
be resized and skip the centering.
Additionally, `container_init_floating` has been renamed to
`container_floating_resize_and_center` to more accurately describe what
it does.
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`
The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output
This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.
Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.
Addresses https://github.com/swaywm/sway/issues/3163
This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.
The change can be verified by running following command:
swaymsg exec <application>; swaymsg rename workspace number 1 to 5
Fixes: #3952
This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.
This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.
To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.
This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output
Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
This fixes the issue of the display freezing on reload with
wlroots#1545.
On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.
However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.
This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.
This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.
This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
This cleans up the log when sway fails to read a config file. The
following changes have been made:
- A missing error message has been added to the log when the config file
is a directory instead of a regular file
- In main, `goto` statements have been added after the `sway_terminate`
calls instead of wrapping every block in `if (!terminate_request)`
- Unnecessary NULL-checks around calls to free in `main` have been
removed
- Deferred command execution has been extracted to a separate function
and the `Running deferred commands` log message will not be shown when
there are no deferred commands.
Just a convenience function that improves readability of the code.
Other things worth noting:
* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.
Example clients that have this behaviour are emersion's hello-wayland
and weston.
It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.
The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.
For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
This happens if you plug in more outputs than supported by your GPU.
This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.
This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.
For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.
To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.
During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.
In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.
container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
When resetting the keyboard during reload, disarm the key repeat on all
keyboards since the bindings (and possibly keyboard) will be freed before
the key repeat can go off.
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.
String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
This allows `bar output` and `bar tray_output` to specify an output
identifier. Output names should still work as well.
This parses the output identifier from the xdg_output description,
which wlroots currently sets to `make model serial (name)`. Since this
could change in the future, all identifier comparisons are guarded by
NULL-checks in case the description cannot be parsed to an identifier.
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
Implements customization for the indicator as proposed in #2788 with comments from #3367 in mind.
The default behaviour does not change exept for the caps lock text color.
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.
This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.
This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when
parsing mouse buttons for the `press` and `release` operations. All x11
buttons, button event names, and button event codes are supported.
For x11 axis buttons, `dispatch_cursor_axis` is used instead of
`dispatch_cursor_button`. However the `press`/`release` state is ignored
and the either axis event is processed. This also removes support for
`left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.
The move_tiling_threshold operation has been merged into move_tiling.
The main logic for each operation is untouched aside from variable
renames.
The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
This modifies `bindcode` and `bindsym` to use `get_mouse_bindcode` and
`get_mouse_bindsym`, respectively, to parse mouse buttons. Additionally,
the `BINDING_MOUSE` type has been split into `BINDING_MOUSECODE` and
`BINDING_MOUSESYM` to match keys and allow for mouse bindcodes to be
used. Between the two commands, all button syms and codes should be
supported, including x11 axis buttons.
The following helper functions have been added to aid with parsing mouse
buttons from a string:
1. `get_mouse_bindsym`: attempts to parse the string as an x11 button
(button[1-9]) or as an event name (ex BTN_LEFT or BTN_SIDE)
2. `get_mouse_bindcode`: attempts to parse the string as an event code
and validates that the event code is a button (starts with `BTN_`).
3. `get_mouse_button`: this is a conveniency function for callers that
do not care whether a bindsym or bindcode are used and attempts to parse
the string as a bindsym and then bindcode.
None of these functions are used in this commit. The sole purpose of
this commit is to make the larger set more granular and easier to
review/manipulate. There will be a series of commits following this one
that will modify any command which uses a mouse button to use these
helpers.
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
This fixes an issue where on reload, all input devices that were added
via an implicit fallback to the default seat would be removed from the
default seat and applications would crash due to the seat having no
capabilities.
On reload, there is a query for a seat config with the fallback setting
set (it can either be true or false). If no such seat config exists, the
default seat is created (if needed) and has the implicit fallback true
applied to its seat config. This is the same procedure that occurs when
a new input is detected.
This makes seat configs work like output and input configs do. This also
adds support for wildcard seat configs. A seat config is still created
in the main seat command handler, but instead of creating a new one in
the subcommands and destroying the main seat command's instance, the
seat subcommands modify the main one. The seat config is then stored,
where it is merged appropriately. The seat config returned from
`store_seat_config` is then applied. When attempting to apply a wildcard
seat config, a seat specific config is queried for and if found, that is
used. Otherwise, the wildcard config is applied directly.
Additionally, instead of adding input devices to the default seat
directly when there is no seat configs, a seat config for the default
seat is created with only fallback set to true, which is more explicit.
It also fixes an issue where running a seat command at runtime (with no
seat config in the sway config), would result in all input devices being
removed from the default seat and leaving sway in an unusable state.
Also, instead of checking for any seat config, the search is for a seat
config with a fallback option seat. This makes it so if there are only
seat configs with fallback set to -1, the default seat is still created
since there is no explicit notion on what to do regarding fallbacks.
However, if there is even a single fallback 0, then the default seat is
not used as a fallback. This will be needed for seat subcommands like
hide_cursor where the user may only want to set that property without
effecting anything else.
This modifies the way mouse bindings are parsed. Instead of adding to
BTN_LEFT, which results in button numbers that may not be expected,
buttons will be parsed in one of the following ways:
1. `button[1-9]` will now map to their x11 equivalents. This is already
the case for bar bindings. This adds support for binding to axis events,
which was not possible in the previous approach.
2. Anything that starts with `BTN_` will be parsed as an event code name
using `libevdev_event_code_from_name`. This allows for any button to be
mapped to instead of limiting usage to the ones near BTN_LEFT. This also
adds a dependency on libevdev, but since libevdev is already a dependency
of libinput, this should be fine. If needed, this option can have dependency
guards added.
Binding changes:
- button1: BTN_LEFT -> BTN_LEFT
- button2: BTN_RIGHT -> BTN_MIDDLE
- button3: BTN_MIDDLE -> BTN_RIGHT
- button4: BTN_SIDE -> SWAY_SCROLL_UP
- button5: BTN_EXTRA -> SWAY_SCROLL_DOWN
- button6: BTN_FORWARD -> SWAY_SCROLL_LEFT
- button7: BTN_BACK -> SWAY_SCROLL_RIGHT
- button8: BTN_TASK -> BTN_SIDE
- button9: BTN_JOYSTICK -> BTN_EXTRA
Since the axis events need to be mapped to an event code, this uses the
following mappings to avoid any conflicts:
- SWAY_SCROLL_UP: KEY_MAX + 1
- SWAY_SCROLL_DOWN: KEY_MAX + 2
- SWAY_SCROLL_LEFT: KEY_MAX + 3
- SWAY_SCROLL_RIGHT: KEY_MAX + 4
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
This fixes a few issues with swaybar's cursor scaling:
1. The cursor scale is now changed when the output scale changes
2. The cursor scale is no longer bound by the max output scale when
swaybar is launched
3. Related to the previous item, the cursor is no longer tiny on low
scale outputs after the max output scale has changed
This also bumps up `wl_compositor` to version 4 to allow usage of
`wl_surface_damage_buffer`.
Default output configs were generated on reload to reset an output to
its default settings. The idea was that anything that was removed from
the config or changed at runtime and not in the config should be reset
on reload. Originally, they were created using the output name. Recently,
they were changed to use the output identifier. It turns out that there
are issues of shadowing with that solution as well. This should fix
those issues.
Instead of generating the default output configs on reload and storing
them in the output config list to merge on top of, they are now only
generated when retrieving the output config for an output during a
reload. This means that the default output configs are never stored
anywhere and just used as a base to merge unaltered user configs on top
of during a reload.
Starting with a blank output config, merges get applied in the following
order:
1. Default output config (only during a reload)
2. Wildcard config (only if neither output name or output identifier
exist)
3. Output name config
4. Output identifier config
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
Adds the function `config_add_swaynag_warning(char *fmt, ...)` so that
handlers can add warnings to the swaynag config log in a uniform way.
The formatting is identical to errors and include the line number, line,
and config path.
This also alters the background file access warning to use the function
and introduces a warning for duplicate bindings.
In `i3 4.16`, `i3-nagbar` introduces the flags `-B/--button-no-terminal`
to run the action directly instead of inside a terminal. This implements
the flags for swaynag for compatibility.
Since swaynag does not use an equivalent to `i3-sensible-terminal`, the
flags `-b/--button` only uses a terminal when the environment variable
`TERMINAL` is set, otherwise it acts the same as these new flags.
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
Damage subsurfaces when they are destroyed. Since subsurfaces don't have an
unmap event we need to do that on destroy.
We also don't want to keep a sway_view_child when the wlr_subsurface has been
destroyed.
Fixes https://github.com/swaywm/sway/issues/3197
This adds support for `i3 4.16`'s ability to set the title alignment.
The command is `title_align left|center|right`.
When the title is on the right, marks are moved to the left. Otherwise,
they are on the right.
This renames/moves the following properties:
* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
* This is required to support placeholder containers as they don't
have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
* To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
* The con prefix was there to give it contrast from the view
properties, and is no longer useful.
The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
`i3 4.16` allows users to list multiple outputs for a workspace and the
first available will be used. The syntax is as follows:
`workspace <workspace> output <outputs...>`
Additionally when the workspace is created, the outputs get added to the
output priority list in the order specified. This ensures that if a higher
output gets connected, the workspace will move to the higher output. This
works the same way as if the user had a workspace on an output, disconnected
the output, and then later reconnected the output.
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`
`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.
Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.
Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.
As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.
There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
I originally put the rebase at the end of view_map, but at this point
the view is still at its native size and will ignore the motion event if
it falls outside of its native size. The only way to do this properly is
to rebase the cursor later - either after sending the configure, after
the view commits with the new size, or after applying the transaction. I
chose to do it after applying the transaction for simplicity.
I then attempted to just call cursor_rebase after applying every
transaction, but this causes crashes when exiting sway (and possibly
other places) because cursor_rebase assumes the tree is in a valid
state.
So my chosen solution introduces transaction_commit_dirty_with_callback
which allows handle_map to register a callback which will run when the
transaction is applied.
window_properties is documented to contain a subset of the X11 properties
of a window (its title, class, instance, role, and transient ID). This
commit adds the missing json object from the get_tree output for
xwayland windows only.
This is a follow-up of #2911.
Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
QT unmaps the view before destroying the popup. We destroyed the popup
in response to the view unmapping, but then we'd attempt to destroy it a
second time which caused a crash.
The patch removes the listener.
I tested it with GTK as well, and can confirm the popup is still being
destroyed.
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.
There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.
On a similar note:
* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.
Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.
Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
Fixes a regression introduced in
24a90e5d86.
consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.
To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
The new functions allow a cursor to be warped without changing the focus.
This is a preparation commit to handle cursor warping not only in
seat_set_focus_warp.
For mouse_warping cursor to correctly work on newly spawned containers,
the workspace needs to be arranged before the cursor is warped.
The shell functions each implement their own fullscreen and arrange checks,
move them into the view_map function and pass their states via boolean arguments.
Fixes#2819
Previously we would compare the last focus's workspace with the new
focus's workspace to determine if we need to emit an IPC
workspace::focus event. This doesn't work when moving the focused
container to a new workspace.
This adds a workspace property to the seat which stores the last emitted
workspace::focus workspace. Using this method, after moving the
container, refocusing it will trigger exactly one workspace::focus
event: from the old workspace to the new workspace.
This introduces seat_set_raw_focus: a function that manipulates the
focus stack without doing any other behaviour whatsoever. There are a
few places where this is useful, such as where we set focus_inactive
followed by another call to set the real focus again. With this change,
the notify argument to seat_set_focus_warp is also removed as these
cases now use the raw function instead.
A bonus of this is we are no longer emitting window::focus IPC events
when setting focus_inactive, nor are we sending focus/unfocus events to
the surface.
This also fixes the following:
* When running `move workspace to output <name>` and moving the last
workspace from the source output, the workspace::focus IPC event is no
longer emitted for the newly created workspace.
* When splitting the currently focused container, unfocus/focus events
will not be sent to the surface when giving focus_inactive to the newly
created parent, and window::focus events will not be emitted.
* The loop functions are now prefixed with `loop_`.
* It is now easy to add timers to the loop.
* Timers are implemented using pollfd and timerfd, rather than manually
checking them when any other event happens to arrive.
Since wayland does not currently allow swaybar to create global
keybinds, this is handled within sway and sent to the bar using a custom
event, so as not to pollute existing events, called bar_state_update.
As well as adding the hidden_state property to the bar config struct,
this commit handles barconfig_update events when the mode or
hidden_state changes, and uses a new function determine_bar_visibility
to hide or show the bar as required, using, respectively,
destroy_layer_surface, which is also newly added, and add_layer_surface,
which has been changed to allow dynamically adding the surface.
This distinguishes the binding mode from the distinct config mode, as
well as removing mode_pango_markup from the config struct where it
should not be present.
While allowing negative values for the outer gaps it is still prevented that negative values move windows out of the container. This replaces the non-i3 option for edge_gaps.
Returning a boolean from container_resize_tiled and resize_tiled doesn't
work in all cases. This patch changes it back to void and does a
before/after check to see if the container was resized.
