Commit graph

1273 commits

Author SHA1 Message Date
Manuel Stoeckl 2dc4978d8a Use -fmacro-prefix-map to strip build path
Because meson does not provide a simple way to get the relative build
path, it is computed with a pair of foreach loops. As meson does not
have a simple way to compute string length (except via underscorify
and 63 split operations), the build script uses a shell command
instead.

If the compiler does not suppot -fmacro-prefix-map, then fall back
to passing in the relative path prefix, and use its length to offset
the uses of __FILE__ in log messages so that the build path is at
least still not included in the logs. This is significantly more
efficient than calling _sway_strip_path.
2019-07-15 16:35:50 -04:00
Pedro Côrte-Real e3a3917d3a Layout tiled using a width/height fraction
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.

To do this several parts are reworked:

- The vertical and horizontal arrangement code is ajusted to work with
  fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
  working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
  match. The adjusted parts are container split, swap, and the input
  seat code.

It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.

Fixes #3547
Fixes #4297
2019-07-14 11:13:55 -04:00
Brian Ashworth 152e30c374 cmd_bindswitch: add option to execute on reload
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to  allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
2019-07-09 10:00:57 +03:00
Sebastian Parborg 538b36c0e2 Make mouse drag in tiled mode swap containers if no edge is selected
Now the highlighted center area of containers triggers a swap action
instead of moving around the containers.
2019-07-09 02:56:55 -04:00
Sergei Dolgov 01ec18e802 Add calibration_matrix config option
Can be used to change the orientation of a touchscreen.

Example usage with swaymsg:

    # identity
    swaymsg input type:touch calibration_matrix '"1 0 0 0 1 0"'

    # 90 degree clockwise
    swaymsg input type:touch calibration_matrix '"0 -1 1 1 0 0"'

    # 180 degree clockwise
    swaymsg input type:touch calibration_matrix '"-1 0 1 0 -1 1"'

    # 270 degree clockwise
    swaymsg input type:touch calibration_matrix '"0 1 0 -1 0 1"'

Documentation:

    https://wayland.freedesktop.org/libinput/doc/latest/absolute-axes.html#calibration-of-absolute-devices
2019-07-05 18:41:56 +03:00
Brian Ashworth c346c020bf config: fix find_handler logic
Without this change, the handlers listed in the config_handlers or
command_handlers arrays (depending on reading or active) in commands.c
would be valid subcommands. To make matters worse, they would also take
precedence over the defined subcommand handlers.

This corrects find_handler to only work on the handler array given
instead of implicitly trying others.
2019-06-20 10:13:58 +03:00
Rouven Czerwinski ddad41f423 Fix sway crashes for scratchpad layouts
Currently container_replace removes the container from the scratchpad
and re-adds it afterwards. For the split commands this results in the
container being send to the scratchpad, which results in a NULL segfault
if the same container should be shown.
Pass an optional workspace to root_scratchpad_add_container, if the
workspace is passed the window will continue to show on the workspace.
If NULL is passed it is sent to the scratchpad.
This was an issue if no other window except the scratchpad container was
on the workspace.

Fixes #4240
2019-06-16 12:29:16 -04:00
Brian Ashworth 9670ccee68 bindings: defer while initiailizing
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
2019-06-12 07:56:41 +03:00
Matt Coffin 2b5bf78faf Fix segfaults caused by faulty command parsing
This patch fixes faulty command parsing introduced by
f0f5de9a9e. When that commit allowed
criteria reset on ';' delimeters in commands lists, it failed to account
for its inner ','-parsing loop eating threw the entire rest of the
string.

This patch refactors argsep to use a list of multiple separators, and
(optionally) return the separator that it matched against in this
iteration via a pointer. This allows it to hint at the command parser
which separator was used at the end of the last command, allowing it to
trigger a potential secondary read of the criteria.

Fixes #4239
2019-06-11 14:40:36 -04:00
Simon Ser 2bccb387d8 Add a new xkb_switch_layout command
This allows users to programatically change the active layout.
2019-06-09 15:20:14 -04:00
Brian Ashworth 5b1a8d62b9 config/input: validate xkb keymap before storing
This allows for an optional validation stage when storing an input
config. Currently, only the xkb keymap is validated. If storing the
delta input config will result in any invalid xkb keymaps, the input
config will not be stored and error will be populated with the first
line of the xkbcommon log.
2019-06-09 20:13:22 +03:00
Brian Ashworth be2d2a299a commands/input: perform basic keymap validation
Before the delta input config is stored, this attempts to compile a
keymap with it. If the keymap fails to compile, then the first line of
the xkbcommon log entry will be included with a `CMD_FAILURE`, the
entire xkbcommon log entry will be included in the sway error log, and
the delta will not be stored.

This only handles basic issues such as a layouts not existing. This
will NOT catch more complex issues such as when a variant does
exist, but not for the given layout (ex: `azerty` is a valid variant,
but the `us` layout does not have a `azerty` variant).
2019-06-09 20:13:22 +03:00
Daniel Eklöf 190546fd31 add seat sub command 'xcursor_theme'
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.

The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
2019-06-05 11:00:10 -04:00
Kenny Levinsen 4925882920 Use parent get_root_coords in subsurfaces
Subsurfaces need access to the parent get_root_coords impl for positioning in
popups. To do this, we store a reference to the parent view_child where
applicable.

Fixes #4191.
2019-05-30 14:25:07 -04:00
Josef Gajdusek b3a5effef2 Implement wlr-output-management-v1 2019-05-24 18:59:14 +03:00
Brian Ashworth 23c64ab22d input/keyboard: attempt default keymap on failure
This attempts to use the default keymap when the one defined in the
input config fails to compile. The goal is to make it so the keyboard
is always in a usable state, even if it is not the user's requested
settings as usability is more important.

This also removes the calls to `getenv` for the `XKB_DEFAULT_*` family
of environment variables. The reasoning is libxkbcommon will fallback
to using those (and then the system defaults) when any of the rule
names are `NULL` or an empty string anyway so there is no need for
sway to duplicate the efforts.
2019-05-14 08:23:26 -06:00
Moelf ed2e553b8d Implement output toggle
discussed in #4136, this can't handle wildcard but won't crash.
2019-05-14 00:11:04 -04:00
Brian Ashworth 18ce0eec60 Spawn swaybar as a wayland client
This just makes it so swaybar is handled as a wayland client
2019-05-12 11:02:42 +03:00
Konstantin Pospelov c42497aca0 bindsym: change xkb_rule_names initialization 2019-04-26 20:56:48 +03:00
Konstantin Pospelov ddf63ffabe bindsym: consider xkb_rule_names for --to-code 2019-04-26 20:56:48 +03:00
Konstantin Pospelov f1609abe4c config: simplify keysym translation fields
Do not store `xkb_keymap` since it can be retrieved from `xkb_state`.
2019-04-26 20:56:48 +03:00
Konstantin Pospelov a09c144b8b Implement bindsym --to-code
* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
2019-04-26 20:56:48 +03:00
Drew DeVault 236ca63419 swaybg: split into standalone project
The new upstream is https://github.com/swaywm/swaybg

This commit also refactors our use of gdk-pixbuf a bit, since the only
remaining reverse dependency is swaybar tray support.
2019-04-25 18:44:28 +03:00
Brian Ashworth dc7a3930a7 swaybar: add multiseat support
This just adds multiseat support to swaybar
2019-04-24 07:16:37 -06:00
Brian Ashworth 583ceff6f6 swaybar: hide mode visibility improvements
This allows swaybar to become visible when the mode changes (to any
mode other than the default). swaybar will be hidden again when the
modifier is pressed and released or when switching back to the default
mode.

This also applies the same logic to visible by urgency to hide swaybar
when the modifier is pressed and released.

These changes are to match i3's behavior.
2019-04-24 07:14:48 -06:00
Brian Ashworth 9099adbbe6 swaynag: revamp type configs
This revamps the type configs for swaynag. All sizing attributes for
swaynag are now `ssize_t` instead of `uint32_t` to allow for a default
value of `-1`, which allows for `0` to be a valid value. Additionally,
the initialization of the type configs has been changed from a simple
calloc to use a new function `swaynag_type_new`. `swaynag_type_new`
calloc's the memory, checks for an allocation failure, sets the name,
and all sizes to -1. The layering order has also been changed to
default, general config, type config, and as highest priority command
line arguments. Finally, `swaynag_type_merge` has been modified to
handle the layering and sizing changes.
2019-04-20 09:14:41 -06:00
Alex Maese 35ddd9aab3 Add unbindsym/unbindcode command for swaybar 2019-04-17 23:29:43 -04:00
Alex Maese 8d4f8aea46 Add unbindswitch command 2019-04-17 23:29:43 -04:00
Alex Maese 852f1f0b34 Create unbindsym and unbindcode commands 2019-04-17 23:29:43 -04:00
Brian Ashworth d7d29fe546 swaymsg: add timeout and type checks
This adds a 3 second timeout to the initial reply in swaymsg. This
prevents swaymsg from hanging when `swaymsg -t get_{inputs,seats}` is
used in i3. The timeout is removed when waiting for a subscribed event
or monitoring for subscribed events.

This also adds type checks to commands where i3 does not reply with all
of the properties that sway does (such as `modes` in `get_outputs`).

This is mostly just a behavioral adjustment since swaymsg should run on
i3. When running under i3, some command reply's (such as the one for
`get_outputs) may have more useful information in the raw json than the
pretty printed version.
2019-04-17 09:07:08 +03:00
Connor E b2cfcebef6 Add deprecation warnings for new_float, new_window, and force_focus_wrapping. 2019-04-14 20:44:12 -04:00
Benjamin Cheng bd3720585e Implement input type configs (#3784)
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.

When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
2019-04-14 19:31:36 -04:00
Benjamin Cheng 6737b90cb9 Add heuristics to differentiate touchpads
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.

swaymsg is also updated to reflect the new touchpad type.
2019-04-14 19:31:36 -04:00
Brian Ashworth 6961bf2e4c Spawn swaynag as a wayland client
This spawns swaynag as a wayland client similar to how swaybar and
swaybg are already done
2019-04-14 12:41:59 +03:00
Brian Ashworth 69a1a0ff99 Fix scratchpad fullscreen behavior and crash
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.

This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
  into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
  scratchpad, it will be fullscreen when shown (and fullscreen disabled
  when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
  scratchpad, it will be shown immediately as fullscreen global. The
  container is not moved to a workspace and remains in the
  scratchpad. The container will be visible until fullscreen disabled
  or killed. Since the container is in the scratchpad, running
  `scratchpad show` or `move container to scratchpad` will have no
  effect

This also changes `container_replace` to transfer fullscreen and
scratchpad status.
2019-04-13 08:48:37 -06:00
Brian Ashworth 195226120f Honor output for xdg_toplevel_set_fullscreen
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.

If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.

If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
2019-04-11 09:18:48 -06:00
Brian Ashworth 75e7bd24cc swaybg: one instance for all outputs
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
2019-04-04 20:08:21 +03:00
Brian Ashworth 679c058fac scratchpad: set initial size
This matches i3's behavior of setting scratchpad containers to 50% of
the workspace's width and 75% of the workspace's height, bound by the
minimum and maximum floating width/height.
2019-03-31 17:49:05 -06:00
Brian Ashworth dd28e6a6d6 Fix xwayland configure request scratchpad crash
This fixes a crash in `container_init_floating` when a xwayland view
sends a configure request while in the scratchpad.

`container_init_floating` gets called so the configured minimum and
maximum sizes gets respected when resizing to the requested size. Since
the workspace was NULL, it would SIGSEGV when attempting to get the
workspace's output for the output box retrieval.

This extracts the resizing portion of `container_init_floating` into a
separate function. If the container is in the scratchpad, it will just
be resized and skip the centering.

Additionally, `container_init_floating` has been renamed to
`container_floating_resize_and_center` to more accurately describe what
it does.
2019-03-31 09:32:23 +03:00
Brian Ashworth d9de5b8758 Implement inhibit_idle command
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`

The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
  a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
  changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output

This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.

Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
2019-03-24 19:26:12 -06:00
Geoff Greer 6e3046878d Add support for manually setting subpixel hinting on outputs.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.

Addresses https://github.com/swaywm/sway/issues/3163
2019-03-24 09:37:24 +02:00
mliszcz 200833caae Allow for workspace renaming during exec handling
This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.

The change can be verified by running following command:

swaymsg exec <application>; swaymsg rename workspace number 1 to 5

Fixes: #3952
2019-03-23 17:49:27 -04:00
Brian Ashworth 7d2076cbff criteria: fix __focused__ when no focus or unset
This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.

This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.

To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
2019-03-23 09:53:23 +02:00
Ryan Walklin bdb402404c Support WLR_INPUT_DEVICE_SWITCH in sway
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.

Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>

Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID

<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE

(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
2019-03-19 23:58:47 -04:00
Ryan Dwyer e9a476244d Remove debug tree
This feature has served its purpose. It's better to use IPC now.
2019-03-18 11:29:19 -04:00
Ryan Dwyer 7b9ae42331 Introduce default seatop
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.

The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.

Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.

The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.

The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.

The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.

The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.

The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
2019-03-17 10:02:04 -06:00
Ryan Dwyer fb3475e291 Replace seatup allows_events with button callback 2019-03-17 10:02:04 -06:00
Brian Ashworth 3106ef23a7 Fix output config retrieval for new outputs
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.

This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output

Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
2019-03-16 10:40:46 -06:00
Brian Ashworth 52a61671e9 criteria: change workspace to support regex
This changes the workspace criteria to support regex instead of basic
strings. This matches i3's behavior.
2019-03-12 20:52:09 -06:00
emersion 076257a978 Stop using wlr_output->{lx,ly}
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes
output_get_in_direction adding buffer coords to layout coords.
2019-03-11 12:43:01 -04:00
Ryan Dwyer d16845d5f0 Don't send button events to surfaces when dragging or resizing
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.

The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
2019-03-11 14:55:54 +01:00
Ian Fan 5c8424c074 stringop.c: remove unused functions
The only use of `join_list` in swaybar/tray/icon.c has been rewritten.
2019-03-11 14:42:58 +01:00
Brian Ashworth 017a7c4da1 sway_view_child: add listener for view unmap
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
2019-03-11 10:02:52 +01:00
Brian Ashworth 430359519c floating_maximum_size: change default behavior
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.

This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
2019-03-02 09:10:26 +01:00
emersion 88b283c557 seat: don't send button release when not pressed
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.

This commit moves the logic used to send pressed/released into the "down"
operation.
2019-02-28 23:02:06 -05:00
Milkey Mouse 2f7247e08a swaybar: add overlay mode (fix #1620)
Overlay mode puts the bar above normal windows and passes through/ignores any
touch/mouse/keyboard events that would be sent to it.
2019-02-24 20:05:47 -05:00
db 2510e3df38 add --i3 flag to hide_edge_borders
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.

Related issues and merge requests: #3031, #3002, #2912, #2987.
2019-02-24 15:26:37 -05:00
Connor E d4b1e71b91 Make load_include_configs void. Fix some cases where WD would not be restored. 2019-02-24 00:01:35 -05:00
Drew DeVault 4599907de7 swaybar: process hotspots on touch tap 2019-02-23 20:00:20 +01:00
emersion 656541bcc4
Update for swaywm/wlroots#1517 2019-02-23 19:04:10 +01:00
Drew DeVault 487c83f0de Add workspace {prev,next}_on_output --create
This creates the next workspace if you hit the end.
2019-02-17 11:50:07 -05:00
Drew DeVault cd10e755c1 Remove refs to unimplemented debuglog command
Closes #3695
2019-02-17 09:52:19 -05:00
emersion 7baaa3a0f8 Disconnect swaybg instead of killing it
This is much more reliable. This also fixes race conditions when killing swaybg
while it's doing a wl_display_roundtrip.
2019-02-16 19:11:22 -05:00
emersion 8ab64d3fcc Remove unused header include/sway/tree/output.h 2019-02-16 17:40:56 -05:00
Brian Ashworth 272ca06171 Fix reload freeze when not modsetting current mode
This fixes the issue of the display freezing on reload with
wlroots#1545.

On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.

However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.

This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
2019-02-16 23:37:36 +01:00
Ian Fan 5484f308b9 swaybar: prevent signal handler from firing during termination
This prevents a heap-use-after-free crash when sway terminates.
2019-02-15 14:09:14 +00:00
emersion 97c89b24b8
Rebase cursor when a layer surface maps
Also removes an extraneous arrange_outputs call, it's already called if
necessary in arrange_layers.

Updates https://github.com/swaywm/sway/issues/3080
2019-02-12 22:57:23 +01:00
Brian Ashworth 7299b9a6ca seat_cmd_cursor: do not create non-existing seat
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.

This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
2019-02-03 14:01:29 -05:00
Brian Ashworth ebe5399ed6 pointer_constraint: change to a seat subcommand
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.

This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
2019-01-31 22:58:52 -05:00
v44r 204e1f4712 Rebase #1636 against current master 2019-01-31 15:37:57 +01:00
Drew DeVault a6d41254c9 Add pointer_constraint command 2019-01-30 19:53:59 +01:00
absrd ee4b8a3938 Add relative pointer 2019-01-30 19:53:59 +01:00
Las cedde21c96 Implement pointer-constraints-unstable-v1 2019-01-30 19:53:59 +01:00
Brian Ashworth f0fd6119cf Cleanup config reading failure error logs
This cleans up the log when sway fails to read a config file. The
following changes have been made:
- A missing error message has been added to the log when the config file
is a directory instead of a regular file
- In main, `goto` statements have been added after the `sway_terminate`
calls instead of wrapping every block in `if (!terminate_request)`
- Unnecessary NULL-checks around calls to free in `main` have been
removed
- Deferred command execution has been extracted to a separate function
and the `Running deferred commands` log message will not be shown when
there are no deferred commands.
2019-01-29 13:18:53 -05:00
Ryan Dwyer 6b8bf10941 Introduce container_is_scratchpad_hidden
Just a convenience function that improves readability of the code.

Other things worth noting:

* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
2019-01-28 10:35:40 +01:00
Ryan Dwyer 0a9ff774ad Center surface inside container when it's too small
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.

Example clients that have this behaviour are emersion's hello-wayland
and weston.

It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.

The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.

For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
2019-01-28 01:17:21 -05:00
Drew DeVault 783fadab28
Merge pull request #3423 from RyanDwyer/fullscreen-global
Implement fullscreen global
2019-01-27 18:06:50 -05:00
emersion a452f8f822
Update for swaywm/wlroots#1503 2019-01-27 12:59:46 +01:00
Ryan Dwyer 20aa8ee67d Implement fullscreen global 2019-01-25 08:29:21 +10:00
emersion 75406bb93b Update for swaywm/wlroots#1402 2019-01-24 11:48:19 +01:00
Jan Beich ba96983bf0 Make json-c include respect pkg-config --cflags
json-c.pc contains `Cflags: -I${includedir}/json-c`, so `<json-c/json.h>`
won't be found unless the parent directory is searched by default.
2019-01-23 21:50:06 -05:00
Ian Fan de9a357de8 util.c: remove numlen function
Its uses have been replaced by snprintf, which is more in line with its usage.
2019-01-22 13:10:25 +01:00
Ryan Dwyer 2301349ad5 Use noop output when there's no outputs connected
Instead of having NULL workspace->output pointers, use a noop output.
This should be safer.
2019-01-22 09:55:13 +01:00
M Stoeckl 4b1eaaf731 Removed unused wlroots dependency for sway(bg|bar|msg|nag)
Also remove direct libm dependency where unused.
2019-01-21 13:04:15 -05:00
M Stoeckl d7ff776552 Move sway-specific functions in common/util.c into sway/
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
2019-01-21 12:39:16 -05:00
M Stoeckl 1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
emersion a737d7ecc4
Better handle outputs without CRTC
This happens if you plug in more outputs than supported by your GPU.

This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
2019-01-18 10:09:10 +01:00
emersion dc1eac0cf1 output: remove output_add_listeners
Simplify the code by registering signals when outputs are created and removing
signals when they are destroyed.
2019-01-18 10:08:34 +01:00
emersion f951c2357f
Remove unicode.c 2019-01-17 12:45:41 +01:00
emersion b29d19bf0d
Remove swaylock headers 2019-01-17 10:26:42 +01:00
Brian Ashworth 02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Ryan Dwyer 2024f1da72 Resize only current and immediate siblings rather than all siblings
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.

To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.

During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.

In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.

container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
2019-01-15 08:01:21 +10:00
Brian Ashworth 2573606b60 Disarm key repeat on reload
When resetting the keyboard during reload, disarm the key repeat on all
keyboards since the bindings (and possibly keyboard) will be freed before
the key repeat can go off.
2019-01-14 20:15:23 +01:00
M Stoeckl 2a684cad5f Remove now-unused "input" argument of cmd_results_new
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.

String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
2019-01-14 08:05:29 -05:00
M Stoeckl 6d392150a7 Remove 'input' field of IPC command return json
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
2019-01-14 07:58:02 -05:00
Drew DeVault 4879d40695
Merge pull request #3144 from emersion/cmd-xwayland
Add xwayland command
2019-01-13 20:42:39 -05:00
Drew DeVault 81bb675274
Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improved
Improve mouse button parsing: bar mouse bindings
2019-01-13 20:41:05 -05:00
Drew DeVault 9f9ef76175
Merge pull request #3343 from RedSoxFan/seat-cursor-buttons-improved
Improve mouse button parsing: seat cursor buttons
2019-01-13 20:40:42 -05:00
Drew DeVault 23ab56bbf7
Merge pull request #3402 from RyanDwyer/refactor-seatops
Refactor seat operations to use an interface
2019-01-13 20:38:34 -05:00
Drew DeVault 08569aab36
Merge pull request #3388 from RedSoxFan/reset-inputs-on-reload
reload: reset input configs
2019-01-13 20:37:05 -05:00