Commit graph

1293 commits

Author SHA1 Message Date
xdavidwu 5886187c6e Port input method and text input from rootston
This ports swaywm/wlroots#1203, swaywm/wlroots#1303,
swaywm/wlroots#1308, swaywm/wlroots#1759 rootston part to sway.

Co-Authored-By: Leo Chen <leo881003@gmail.com>
2020-04-04 11:42:04 +02:00
Ian Fan 65501f0e46 tray: track SNI callbacks
This removes any pending messages once the item is destroyed.
Furthermore, this installs SNI event calbacks asynchronously
in order to prevent sd-bus from bypassing pending messages.
2020-03-30 17:31:00 +02:00
Ian Fan 68f53cd509 tray: tidy code
This includes some refactoring and fixing a small memory leak.
2020-03-30 17:31:00 +02:00
Ian Fan 3b894c387d tray: allow themes to inherit from multiple themes 2020-03-30 17:31:00 +02:00
Linus Heckemann df48c48123 add --no-repeat option for bindings
This allows e.g. triggering one command while a key is held, then
triggering another to undo the change performed by it afterwards. One
use case for this is triggering push-to-talk functionality for VoIP
tools without granting them full access to all input events.

Fixes #3151
2020-03-30 14:18:27 +02:00
Michael Weiser 3ee5aace33 commands: Add shortcuts_inhibitor command
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:

bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate

It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.

As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Michael Weiser eeac0aa170 input: Add support for keyboard shortcuts inhibit
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.

Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.

Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Michael Weiser ef9c597fcb config: Fix typo in reload bindsym flag bitmask
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced
in commit 152e30c37 so it can work as intended.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Simon Ser 5d692b0581 Add an adaptive_sync output command
This enables/disables adaptive synchronization on the output.

For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
2020-03-07 00:32:04 +01:00
Simon Ser 9d0aa0cb83 Use wlr_client_buffer
Update for breaking changes in [1].

[1]: https://github.com/swaywm/wlroots/pull/2043
2020-03-06 23:57:43 +01:00
Simon Ser 241684eb1d Drop sway_output.surface_needs_frame
wlr_output_schedule_frame now sets output->needs_frame [1], so this
isn't needed anymore.

[1]: https://github.com/swaywm/wlroots/pull/2053
2020-03-06 21:37:53 +01:00
Simon Ser c0811fcf87 Make handle_destroy and output_repaint_timer_handler static 2020-03-04 03:09:43 +01:00
Ryan Dwyer 2045ac3472 Introduce pid criteria token
This can be used as a workaround to flag terminal windows as urgent when
commands are completed, until urgency is introduced in the Wayland
protocol.

Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when
commands are completed, and use a terminal which uses one process per
window.
2020-02-27 14:03:22 +01:00
Simon Ser 5ed01c861a Add support for wlr-output-power-management-unstable-v1 2020-02-26 16:26:13 +01:00
Torstein Husebø af294289b1 treewide: fix typos 2020-02-18 21:53:57 +01:00
Brian Ashworth 8b593677d2 output: fix updating output manager config
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.

Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.

This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.

Additionally, this renames output_enable to output_configure to better
describe the recent changes.
2020-02-16 09:42:22 +01:00
Simon Ser f5fa0c7124 Stop calling apply_output_config from output_enable
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.

output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.

This change also allows us to avoid an extraneous wlr_output_commit.

References: https://github.com/swaywm/sway/issues/4921
2020-02-11 20:52:02 -05:00
Hristo Venev 7affe5c1bd swaybar: fix i3bar relative coordinates when scaling is used
24e8ba048a did not take scaling into account.
The hotspot size used pixel coordinates, the absolute coordinates were logical,
and the relative coordinates were completely wrong.

This commit makes all coordinates use logical values. If
`"float_event_coords":true` is sent in the handshake message, coordinates are
sent as floating-point values.

The "scale" field is an integer containing the scale value.
2020-02-10 18:58:09 +01:00
Hristo Venev fca32b6334 Do not truncate pointer coordinates to int.
This increases the precision of the clicks when using i3bar.
2020-02-10 18:58:09 +01:00
Anders 4e46bdf73d criteria: match containers without view
Closes #4929

Replaces criteria_get_views with criteria_get_containers which can
return containers without views when the criteria only contains
container properties.
2020-02-04 19:52:21 -05:00
thermitegod 29a5ce5f65 Fix compiling with -fno-common 2020-01-24 10:16:59 +01:00
Ronan Pigott d88d4bbd9d Fix crash when showing scratchpad hidden split containers 2020-01-16 21:48:25 -05:00
Simon Ser 0d2a3fa835 Revert "Make all the container dimensions integers"
This reverts commit 79c5f5ba12.

Fixes: https://github.com/swaywm/sway/issues/4908
2020-01-15 17:56:14 +01:00
Brian Ashworth c99d423ad9 view: remove workspace pid mapping for assigns
If a view is mapped to a workspace using an assign, the pid should still
be removed from the pid mapping list. This prevents child processes from
matching against it and mapping a view to a likely undesired workspace.
2020-01-09 09:52:37 +01:00
Brian Ashworth 897c36b12c input/cursor: handle image surface destroy
This adds a listener for the destroy event of the cursor image surface.
This prevents a use-after-free when the last visible image surface is
freed, there has not been a new cursor set, and the cursor is reshown.
2020-01-05 23:03:34 +01:00
Andri Yngvason 4c29a53386 swaynag: Add multi-seat support
This also adds cleanup for all seat resources
2020-01-05 19:57:05 +01:00
Pedro Côrte-Real 79c5f5ba12 Make all the container dimensions integers
Containers are always fixed to the pixel grid so position and size them
with integers instead of doubles.

Functionally this should be no different since rounding down is already
being done on things like layout. But it makes it clear what the
intention is and avoids bugs where fractional pixels are used. The
translating and moving code is still using doubles because the cursors
can have fractional pixels and thus the code is plumbed that way. But
that could also probably be changed easily by doing the integer
conversions earlier and plumbing with int.
2020-01-01 10:14:40 -07:00
Pedro Côrte-Real 8008344762 Avoid numerical instability in resize
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.

To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:

1. For the container we are actually resizing using floor() might result
   in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
   and then if the container being resized is the last all those extra
   pixels would make the resize too large.

Fixes #4391
2020-01-01 10:14:29 -07:00
Josef Gajdusek f501a60c14 Add virtual pointer protocol 2019-12-31 16:04:50 +01:00
Brian Ashworth f898ca9a83 bar_cmd_colors: remove add_color
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
2019-12-28 10:07:25 +01:00
Brian Ashworth 66dc33296c cmd_client_*: refactor duplicated code
This is the second in a series of commits to refactor the color handling
in sway. This removes the duplicated color parsing code in
sway/commands/client.c. Additionally, this combines the parsing of
colors to float arrays with that in sway/config.c and introduces a
color_to_rgba function in commom/util.c.

As an added bonus, this also makes it so non of the colors in a border
color class will be changed unless all of the colors specified are
valid. This ensures that an invalid command does not get partially
applied.
2019-12-28 10:07:25 +01:00
Brian Ashworth 97f9f0b699 parse_color: return success + drop fallback color
This is the first in a series of commits to refactor the color handling
in sway. This changes parse_color to return whether it was success and
no longer uses 0xFFFFFFFF as the fallback color. This also verifies that
the string actually contains a valid hexadecimal number along with
the length checks.

In the process of altering the calls to parse_color, I also took the
opportunity to heavily refactor swaybar's ipc_parse_colors function.
This allowed for several lines of duplicated code to be removed.
2019-12-28 10:07:25 +01:00
Brian Ashworth 452a615bb8 seat_cmd_keyboard_grouping: change keymap to smart
This removes `seat <seat> keyboard_grouping keymap` and replaces it with
`seat <seat> keyboard_grouping smart`. The smart keyboard grouping will
group based on both the keymap and repeat info. The reasoning for this
is that deciding what the repeat info should be for a group is either
arbitrary or non-deterministic when multiple keyboards in the group have
repeat info configured (unless somehow exposed to the user in a
reproducible uniquely identifiable fashion).
2019-12-16 12:03:11 -05:00
Drew DeVault 2f3c6cccf5 Add seat <seat> idle_{inhibit,wake} <sources...>
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.

An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
2019-12-12 10:37:30 -05:00
Benjamin Cheng 9ef026e804 input/cursor: pass gesture events to clients
Some wayland clients (mostly GTK3 apps) like eog or evince support
gestures like pinch-to-zoom. These gestures are given to clients
via the pointer_gestures_v1 protocol. This is already supported in
wlroots, so we just need to hook up the events here in sway.

Fixes #4724
2019-12-07 12:26:21 -05:00
Kenny Levinsen d1eab10266 output: Schedule idle frames if we do not render
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.

If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.

If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.

To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.

Fixes #4768
2019-12-01 12:44:07 +01:00
Ronan Pigott 6968fb3123 add scale_filter output config option 2019-11-29 18:13:37 +01:00
Brian Ashworth 5d882cb5fc Add support for wlr_keyboard_group
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.

This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
2019-11-21 10:42:10 -05:00
Brian Ashworth 2f858a1ada input_cmd_xkb_file: allow shell path expansion
This allows for shell path expansion for input_cmd_xkb_file. The logic
has been extracted from output_cmd_background
2019-11-21 10:36:15 -05:00
Ivan Molodetskikh bd9a53f1a3 view: add max_render_time 2019-11-17 20:18:42 +01:00
Ivan Molodetskikh 5421198489 Add sway_surface
For extending wlr_surface with additional things.
2019-11-17 20:18:42 +01:00
Ivan Molodetskikh 022df2542b output: add max_render_time 2019-11-17 20:18:42 +01:00
Tadeo Kondrak 7f54495b5e Use an enum instead of a marker string for map_to_ 2019-11-17 13:34:24 +01:00
Tadeo Kondrak 4829f1c26a Implement input map_to_region command 2019-11-17 13:34:24 +01:00
Ronan Pigott 3975ca28c2 smart_borders: separate smartness from edge types 2019-11-04 21:16:27 -05:00
Simon Ser 38b37247ff Add --custom to output mode command
This forces to set the mode as a custom mode.
2019-11-04 19:40:47 -05:00
Sheena Artrip 7efb5d4673 Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.
set_cloexec is defined by both sway and wlroots (and who-knows-else),
so rename the sway one for supporting static linkage. We also remove
the duplicate version of this in client/.

Fixes: https://github.com/swaywm/sway/issues/4677
2019-11-01 12:41:08 -04:00
Simon Ser ad07886543 Handle layer changes for layer shell surfaces
Closes: https://github.com/swaywm/sway/issues/4644
References: 1982106c9b
2019-10-27 11:07:18 -04:00
Ronan Pigott 7c9b71f5c6 criteria: make literal comparison for __focused__ values 2019-10-27 11:06:05 -04:00
Simon Ser ec14a00e8c Fix segfault in wlr_output_manager_v1_set_configuration
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.

When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.

Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.

Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27 10:51:02 -04:00