Currently, swaybar does not gracefully die if it detects
that the dbus connection was lost. Although it's not recommended
to restart dbus without restarting the compositor, it can very
easily happen. In the case it does, compositor's tray should
not consume 100% cpu until it has to be force killed.
apply suggestions
just setting the bar to not running will call teardown and unref the
dbus.
(cherry picked from commit 00e9a94152)
If a modeset timer exists at the time we apply an output manager config,
clear it to avoid a useless double commit.
(cherry picked from commit 63345977e2)
We batch modesets and input configuration performed during config reload
but commit for every command during the intial config load. There is no
need to perform commits during the initial config load as outputs have
not yet been created, but swaybg spawn should still be batched.
At the same time, replace direct calls to apply output configuration
with request_modeset to properly handle the modeset timer.
(cherry picked from commit cdff4f7c74)
We remove the struct sway_server argument for consistency with the rest
of our internal APIs which rely on the global server instance.
(cherry picked from commit b73f54a966)
Checking if the config is not active or is reloading is just a
convoluted way of checking if the config is being read.
(cherry picked from commit 861dde100a)
Arranging lock surfaces rely on the sway_output width and height being
updated, but these are only updated after the commit has been completed
and all commit listeners have executed. This means that the lock
surfaces will not be appropriately scaled to match a change in output
dimensions, and may reveal what is under the lock background.
Replace the implicit arrange through the output commit listener with an
explicit arrange after the output configuration is finalized.
This might have regressed by other transition away from output commit
listeners for other arrange tasks, but even then it would have
erroneously relied on signalling order.
(cherry-picked from 785a459a55)
Instead of using a single finalized output config per output, accept a
regular list of output configs like the one ultimately stored for
configuration purposes. This allows the output management code to test
an augmented configuration while still using the same output config
logic, without having to mutate the stored configuration.
This in turn allows us to make a few APIs private. A bug note about an
existing issue with derade to off is added as well.
(cherry picked from 29b3f00e6f)
We always need to start out with the default configuration, regardless
of whether the config is reloading or not to ensure that config
decisions are stable given a specific configuration.
(cherry picked from 0496477f92)
Simplify find_output_config and inline the search through the output
configs instead of using list_seq_find with a comparator function. The
new implementation will merge any amount of matched configs in order,
which will be relied upon in a future commit.
(cherry picked from a0c0349934)
Disabled outputs might not have a geometry to arrange for, so skip the
arrange to avoid messing up the workspace geometry.
(cherry picked from f4a6b0395f)
Output layout changes originate from the centralized modeset
infrastructure and request_state which already takes care of arranging
and updating outputs as needed.
(cherry picked from af28ac04a4)
output_enable/output_disable are only called from modeset, and from
output destroy which requests modeset. As such, they can rely on the
modeset handling arrange.
(cherry picked from 6045ad9a02)
The reasoning for using a commit handler is to ensure that all paths for
output changes are correctly handled. With the centralized modeset
infrastructure in place, we can move the logic there. This allows us to
be smarter and avoid extraneous arranges, output manager updates and
transaction commits.
The side-effect is a minor duplication for the special-case
request_state, but the shared path will be relied upon further in future
commits to justify this duplication.
(cherry picked from commit b83e5aaa54)
This seems to be the intention of input_popup_update in the first place:
handle the scenario where the focus moves.
(cherry picked from commit e9dd218231)
The last implementation would ignore these and get it could get into
a bad state where it would start crashing sway.
(cherry picked from commit 74e507962e)
Input method popups in the future will destroy the scene descriptor when
it isn't mapped and therefore shouldn't be tampered with here.
(cherry picked from commit 023f6b0a50)
GUD devices uses RGB565 by default for performance reasons. Allow
specifying render_bit_depth 6 to pick this format. The definition works
out if you consider the maximum number of bits per channel instead of
the average.
(cherry picked from commit 034d02f8a5)
Some display output hardware [1] doesn't support any of the current
formats, but works with ARGB8888. Fall back to it if available.
[1] 196145c606/drivers/gpu/drm/xlnx/zynqmp_disp.c (L313)
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
(cherry picked from commit f957c7e658)
Previously, we incorrectly only set active keyboard for non-virtual
devices. 4c3c060211 incorrectly put
unrelated code in `sway_keyboard_set_layout`.
Fixes: 4c3c060211
(cherry picked from commit c5ba7f23a5)
If the output is not active, it might not have a valid geometry to
arrange for. Outputs do not gain a geometry until modeset, so if an
output is connected with a configuration present to disable it, it will
not have a geometry. If the output has a past workspace restored, this
will be attemtped arranged to fit a 0x0 rectangle, which asserts when
trying to sort out borders.
Consider the workspace activated only if the output itself is active to
get the scene nodes disabled.
(cherry picked from commit 14bff7b451)
The else condition was missed here and we would never skip the % char
if it didn't end up matching with any property. Since we fail to skip
we would re-evaluate the % in an infinite loop never achieving any
forward-progress.
Fixes: https://github.com/swaywm/sway/issues/8333
(cherry picked from commit fc6b8d6af2)
Its a little tought to notice that the COMMANDS section is actually 3 sections. Use markdown to make this easier to see for the user.
(cherry picked from commit f2b2a81149)
This can cause issues such as the window not being shown at the exact
same coordinates when the old and new wlr_box aren't the same
dimensions and the container is being moved back-and-forth between them.
For example, in the case where a floating window gets moved
from one output to another but the outputs aren't the same resolution.
For e.g. have two displays that aren't the same resolution then:
1. Open a floating window and set it to pos 0,0 on output 2
2. Send it to scratchpad then `scratchpad show` on output 1
3. `scratchpad show` on output 2 again
Observe that the window isn't at 0,0 on output 2 anymore.
(cherry picked from commit 77b9ddabe2)
When moving a container to a new workspace, the workspace's dimension
are left unset. Usually this doesn't matter, but when moving a floating
container to a new workspace on a different output, this leads to the
position of the container being calculated with 0, so the container ends
up halfway offscreen on the leftmost topmost monitor.
Signed-off-by: Anna (navi) Figueiredo Gomes <navi@vlhl.dev>
(cherry picked from commit f00f964abf)
When doing an output configuration search, the intent is to only look
for modes if the output's configuration does not contain a specific
mode. This was done by testing if config_has_auto_mode returned false.
config_has_auto_mode had its return values backwards, leading to other
modes being tested if the output configuration had specified modes or
modelines, leading to unwanted modes being selected.
Invert the function to config_has_manual_mode to give it a clearer name,
and fix the return values in the process.
(cherry picked from commit f9c0f043e5)
After 4e38f93f36 ("config/output: Skip VRR tests when not supported"),
the configuration search no longer touches VRR state for outputs that
are known to not support it. This also means that it will not remove VRR
if already set, which could cause output configuration to fail.
Ensure that VRR state is never set for outputs that do not support it by
adding the same test for support to queue_output_config.
Fixes: 4e38f93f36 ("config/output: Skip VRR tests when not supported")
Fixes: https://github.com/swaywm/sway/issues/8296
(cherry picked from commit ae7c1b139a)
This removes the last dependency bit on dmenu. No need for
"swaymsg exec" anymore: wmenu-run handles the xdg-activation
shenanigans.
(cherry picked from commit b44015578a)
Note that in the `sway_keyboard_configure` function of sway/input/keyboard.c,
we have skipped the `sway_keyboard_set_layout` function for virtual
keyboards, which then have null keymaps.
Hence, a null-safety check is needed at runtime.
(cherry picked from commit f344e9d5a5)
When attempting to use Git to populate commit/branch information in a
version string, it is possible through repository discovery that it
uses Git information not relevant to project. For example, if
repository content is extract into an interim build location when using
an embedded build framework (e.g. Buildroot), the project will not have
its Git repository to refer to. When it cannot find its repository, it
will look into its parent folders and may find the Git repository of
another project and use its branch/commit information.
This commit provides an explicit path to the project's Git repository
when consider commit/branch information. This will prevent any
repository discovery from occurring.
Signed-off-by: James Knight <james.d.knight@live.com>
(cherry picked from commit 6e4ccb99c3)
