Commit graph

1397 commits

Author SHA1 Message Date
Kirill Primak e76e13ef85 view: fix child position calc
Previously, the position was calculated incorrectly for nested
subsurfaces.
2021-09-08 09:36:17 +02:00
Simon Plakolb 4baf845a3a seatop_down: End if surface is destroyed or other seatop starts
If the surface the pointer started to interact with is destroyed we also
want the seatop_down to end. In case a drag is initiated we receive a
call to handle_end.
2021-09-02 13:13:40 -04:00
Simon Plakolb 9e58425cb3 input: Use seatop_down on layer surface click
This solves an issue where layer-shell items would not receive a button
release event when the pointer left them while being pressed. The
default seatop changes focus immediately while seatop_down defers any
focus changes until the pointer is released or seatop_down is destroyed.
2021-09-02 13:13:40 -04:00
David Rosca 57d6f6f19e Add output modeline command
Only works with DRM backend.
2021-08-31 17:29:40 +02:00
Hugo Osvaldo Barrera 62d90a8e95 Use fixed titlebar heights
Use fixed titlebar heights. The default height is calculated based on
font metrics for the configured font and current locale.

Some testing with titles with emoji and CJK characters (which are
substantially higher in my setup) shows that the titlebars retain their
initial value, text does shift up or down, and all titlebars always
remain aligned.

Also drop some also now-unecessary title_height calculations.

Makes also needed to be updated, since they should be positioned with
the same rules.
2021-08-26 20:16:14 +02:00
Ronan Pigott f67ed6772c layer_shell: damage previous area when a surface shrinks
When a layer surface shrinks we need to damage the area it previously
occupied, but we don't know the location of all its subsurfaces in the
previous state, so instead damage a rectangle that encloses the entire
previous extent.
2021-08-12 10:05:12 +02:00
Simon Ser 7a15e715b7 Document view_map 2021-08-12 00:15:04 +02:00
David Rosca d0fe721fbb seatop_down: Change type of sx, sy to double in begin_seatop_down
Losing the precision resulted in wlr_cursor and wlr_seat::pointer_state
getting out of sync during pointer motion in seatop_down.
Since the difference was always under 1 px, it was practically
impossible to notice in normal use.

But because of being out of sync, cursor_rebase would always end up
incorrectly calling wlr_seat_pointer_notify_motion from
seatop_default_begin (on releasing mouse button) which broke cursor
locking.

See #5405
Closes #4632
2021-08-05 09:26:11 -04:00
Simon Zeni 6ffa4b1f70 view: remove reference to wlr_wl_shell_surface 2021-07-27 17:31:29 +02:00
Simon Ser 2e03a61262 Fix wl_pointer.frame not sent on touch emulation
When emulating touch, the simulating_pointer_from_touch field is
set to true. It's switched back to false when a touch_up event is
received. However we need to ensure we always send a wl_pointer.frame
event following a group of other wl_pointer events.

Since a touch_frame event is always guaranteed to come after a group
of touch events, unset simulating_pointer_from_touch in the touch_frame
handler instead of the touch_up handler. Add a new field to know whether
the touch_frame handler should stop emulation.
2021-07-26 16:58:11 +02:00
Simon Ser 7114030159 Add support for touch frame events
Update for the breaking change in [1].

[1]: https://github.com/swaywm/wlroots/pull/3001
2021-07-08 09:18:20 +02:00
Simon Ser 4832fc937f Update wlr_box includes
Update for the breaking change in [1].

[1]: https://github.com/swaywm/wlroots/pull/3011
2021-07-07 11:29:14 +02:00
Kenny Levinsen 80315217f7 input: Move get_current_time_msec in from util
get_current_time_msec is only used in cursor.c, so we can move it in and
make it static. This is primarily intended to avoid a symbol collision
with wlroots, which we unfortunately do not have a good solution for
yet.
2021-06-23 09:55:36 +02:00
Ragnar Groot Koerkamp c0c4e260c4 Revert "Add workspace {prev,next}_on_output --create"
This reverts commit 487c83f0de.

The --create flag is undocumented, not in i3, and at least partially
broken (#5913), so this removes the feature.
2021-06-22 19:00:31 +02:00
Ragnar Groot Koerkamp 3080f1b9ce Move auto_back_and_forth logic out of workspace_switch
This extracts the code to a separate workspace_auto_back_and_forth
function.
It also removes the bool argument by adding an extra if statement at the call
site, and repurposes the no_auto_back_and_forth variable to
auto_back_and_forth for simpler understanding.
2021-06-18 16:15:02 +02:00
James Edwards-Jones d13090be54 swaynag: adds option to set wayland shell layer
Uses --layer/-y set to overlay|top|bottom|background
2021-06-17 11:47:49 +02:00
Daniel Otero b997147284 config: Fix swaybar pango_markup inconsistency
Until now, swaybar did not have pango markup enabled by default, even if
the sway config had it on. This patch aims to mimic the i3 behavior, but
maintaining the functionality of the "pango_markup" sway config command.
2021-06-03 14:18:23 +02:00
Simon Ser 9755684fb0 Implement xdg-activation-v1
See https://github.com/swaywm/wlroots/pull/2718.
2021-06-02 19:39:40 +02:00
Issam E. Maghni d45623c2db cairo: Replace <cairo/cairo.h> by <cairo.h>
For full context, read
https://gitlab.freedesktop.org/cairo/cairo/-/issues/479
TL;DR, cairo’s pc file adds `/cairo` to CFLAGS.
So namespace cairo shouldn’t be used.
2021-05-10 10:28:32 +02:00
Simon Ser fd36289faa Remove support for arbitrary rotations
There was some unused code-paths for rendering surfaces with an
arbitrary rotation applied. This was imported from rootston.

Since we don't have plans to make use of this, remove it.
2021-04-26 10:36:25 +02:00
Kenny Levinsen 152a559e30 idle_inhibit: Store wlr inhibitor instead of view
When an application inhibited idle, a view pointer was stored and a
destroy listener was registered to the wlr inhibitor. As the wlr
inhibitor lives longer than the view, this lead to a dangling view
pointer between view unmap and inhibitor destroy.

Store a pointer to the wlr inhibitor instead of to the view, and look up
the view when needed, which may at any point be NULL. This also allows
for an inhibitor to remain functional if a surface is re-mapped.
2021-03-21 12:27:29 +01:00
xdavidwu e5913f8106
Implement input method keyboard grab 2021-03-12 12:18:08 +01:00
ftilde 1afedcb94c Fix for_window criteria and mouse button bindings
Previously, the special case handling of scratchpad and unmark commands
was (probably accidentally) limited to criteria directly handled in the
execute_command function. This would exclude: 1. for_window criteria, as
these are handled externally for views and 2. and mouse bindings which
select target the node currently under the mouse cursor.

As a concrete example `for_window [app_id="foobar"] move scratchpad,
scratchpad show` would show (or hide due to the toggling functionality)
another window from the scratchpad, instead of showing the window with
app_id "foobar".

This commit replaces the "using_criteria" flag with "node_overridden"
with the more general notion of signifying that the node (and
container/workspace) in the current command handler context of the sway
config is not defined by the currently focused node, but instead
overridden by other means, i.e., criteria or mouse position.
2021-02-25 09:48:39 -05:00
lbonn c6e7cf1ae5 focus: beyond fullscreen when focused explicitly
When issuing a focus command on a specific container, users expect to
proceed it even if is hidden by a fullscreen window.

This matches the behavior of i3.
2021-02-25 09:40:20 -05:00
Simon Ser eea9c6331f Automatically map built-in touchscreens/tablets to built-in panels
Detect whether an output is built-in via its type. Detect whether
a touchscreen or tablet tool is built-in via its ID_PATH property.
2021-02-25 09:38:00 -05:00
Quantum e01a3c85f6 render: handle containers without output when rendering titles
In e0a94bee8d, it was believed that if the
container is being rendered, it must have an output.

This turned out not to be the case. When rendering a container, all its
children are rendered, even if the children is positioned off screen and
thus not having any output. This is the cause of the crash in #6061.

This commit introduces a null-check, which fixes #6061.
2021-02-25 00:43:02 -05:00
Kenny Levinsen 1989b18ff2 transaction: Remove unused ready_immediately 2021-02-23 19:38:05 +01:00
Kenny Levinsen 35b9a41720 transaction: Note if instructions are server requests
On server request, we need to send configure events to inform the client
of the new intended size. If the client changes size itself, sending a
configure event will only cause problems.

Use transaction_commit_dirty_client to distinguish between the two
transaction causes.
2021-02-23 19:38:05 +01:00
Kenny Levinsen 2c917a8c34 container: Add container_is_current_floating
Needed to check if containers are currently floating from render code,
as container_is_floating checks pending state.
2021-02-22 23:55:22 +01:00
Kenny Levinsen a047b5ee4a container: Move pending state to state struct
Pending state is currently inlined directly in the container struct,
while the current state is in a state struct. A side-effect of this is
that it is not immediately obvious that pending double-buffered state is
accessed, nor is it obvious what state is double-buffered.

Instead, use the state struct for both current and pending.
2021-02-16 22:05:00 -05:00
Kenny Levinsen c8bf84c82d transactions: Amend pending transactions
The transaction system contains a necessary optimization where a popped
transaction is combined with later, similar transactions. This breaks
the chronological order of states, and can lead to desynchronized
geometries.

To fix this, we replace the queue with only 2 transactions: current and
pending. If a pending transaction exists, it is updated with new state
instead of creating additional transactions.

As we never have more than a single waiting transaction, we no longer
need the queue optimization that is causing problems.

Closes: https://github.com/swaywm/sway/issues/6012
2021-02-16 00:18:26 +01:00
Kenny Levinsen 63a6635163 view: Read geometry directly in view_update_size 2021-02-09 09:37:10 +01:00
Kenny Levinsen 50205ade9d transaction: Move centering to view_center_surface
This will allow us to reuse it for centering elsewhere.
2021-02-09 09:37:10 +01:00
Manuel Stoeckl cb3c727632 Declare all struct cmd_handler arrays const
And make the functions handling these arrays use const types.
2021-02-04 09:49:06 +01:00
Simon Ser 1c3cfd3bac Rename output_layer_for_each_surface_{toplevel,popup}
Swap the "surface" part for consistency with wlroots' naming.
2021-01-12 11:25:34 +01:00
Simon Ser 5438cc158a Switch to wlr_xdg_surface_for_each_popup_surface
Instead of calling wlr_xdg_surface_for_each_popup and then
wlr_surface_for_each_surface, use the new for_each_popup_surface helper
introduced in [1] that does it in one go.

[1]: https://github.com/swaywm/wlroots/pull/2609
2021-01-12 11:25:34 +01:00
Andri Yngvason 98eece53ad input: Clean up input_method_relay in seat_destoy()
This fixes a crash that happens when input_method_new or text_method_new
events are emitted after the seat has been freed.
2021-01-01 19:02:56 +01:00
Ronan Pigott 8eb0c54693 introduce workspace_squash
workspace_squash is container_flatten in the reverse
direction. Instead of eliminating redundant splits that are
parents of the target container, it eliminates pairs of
redundant H/V splits that are children of the workspace.

Splits are redundant if a con and its grandchild have the
same layout, and the immediate child has the opposite split.

For example, layouts are transformed like:

    H[V[H[app1 app2]] app3] -> H[app1 app2 app3]

i3 uses this operation to simplify the tree after moving
heavily nested containers to a higher level in the tree via
an orthogonal move.
2020-12-20 00:58:42 -05:00
Ronan Pigott ece6a1d408 Change workspace_layout to match i3 behavior
In i3, the workspace_layout command does not affect the
workspace layout. Instead, new workspace level containers
are wrapped in the desired layout and the workspace layout
always defaults to the output orientation.
2020-12-20 00:58:42 -05:00
Arav K c9fe0626ca Fix swaybar tray for non-systemd
Meson's generated config.h header defines false macros as 0, not
undefined.  This means that the header line, which was checking for the
definition existing, not a non-zero value, was incorrect.  Now the
swaybar tray can be used with systemd, elogind, or basu.
2020-12-16 21:19:20 +01:00
Simon Ser a52176f830 build: add basu as sd-bus provider 2020-12-09 17:39:20 -05:00
Simon Ser fdbe98512a build: introduce sd-bus-provider option
This allows to select a specific provider for the sd-bus library.
2020-12-09 17:39:20 -05:00
Vlad Pănăzan 71725a8eae Add layer shell subsurfaces
Damage subsurfaces created by layer surfaces on map, unmap and
commit. This fixes the flicker of Gtk Popovers.

Fixes #5617
2020-12-07 12:30:13 +01:00
Tudor Brindus cc2c0d5966 input/cursor: unhide cursor on synthetic input
Fixes #5847.
2020-12-06 09:38:49 +01:00
Paul Riou 4583feee59 common: make 'lenient_strcmp' arguments const
Prevents build failures when calling the function with 'const char *'
arguments.
This is also more accurate since the function is not expected to modify
the args.
2020-12-04 10:49:49 +01:00
Tudor Brindus 07042486c3 tree/container: introduce container_is_sticky[_or_child] functions
To query whether a container is sticky, checking `con->is_sticky` is
insufficient. `container_is_floating_or_child` must also return true;
this led to a lot of repetition.

This commit introduces `container_is_sticky[_or_child]` functions, and
switches all stickiness checks to use them. (Including ones where the
container is already known to be floating, for consistency.)
2020-11-11 20:43:58 -05:00
Tudor Brindus 60d95414d4 commands/focus: force container warp when fulfilling focus mode_toggle
This commit switches focusing behavior to force a warp when executing
`focus mode_toggle`.

Fixes #5772.
2020-11-01 03:43:00 -05:00
Tudor Brindus 8c12e71a66 input: remove motion deltas from seatop callbacks
Straightforward cleanup, they haven't been used for a while.
2020-10-31 23:15:32 +01:00
Tamir Zahavi-Brunner 96578aa91e hide_cursor: Add an option to hide when typing
Add an option for the `hide_cursor` command to hide the cursor when
typing, i.e. whenever a key is pressed.
2020-10-30 09:59:54 +01:00
mwenzkowski 32788a93f2 output: evacuate sticky containers only if new output has a workspace
Sticky floating containers on an otherwise empty workspace can only be
evacuated if the new output has an active workspace. The noop output may
not have one and in that case we have to move the whole workspace to the
new output.
2020-10-27 19:26:26 -04:00