Commit graph

1580 commits

Author SHA1 Message Date
Kenny Levinsen 492267a5d6 seat: Refocus seat when wlr_drag is destroyed
wlr_drag installs grabs for the full duration of the drag, leading to
the drag target not being focused when the drag ends. This leads to
unexpected focus behavior, especially for the keyboard which requires
toggling focus away and back to set.

We can only fix the focus once the grabs are released, so refocus the
seat when the wlr_drag destroy event is received.

Closes: https://github.com/swaywm/sway/issues/5116
2020-06-30 13:27:51 +02:00
Drew DeVault 8d5e627bc9 Implement wlr-foreign-toplevel-management-v1 2020-06-23 22:26:00 +02:00
Tudor Brindus b3f08597cd input: disable events for map_to_output devices when output not present
Fixes #3449.
2020-06-19 10:02:22 +02:00
Tudor Brindus d328c2439c input/pointer: don't trigger pointer bindings for emulated input
Prior to this commit, a tablet device could trigger mouse button down
bindings if the pen was pressed on a surface that didn't bind tablet
handlers -- but it wouldn't if the surface did bind tablet handlers.

We should expose consistent behavior to users so that they don't have to
care about emulated vs. non-emulated input, so stop triggering bindings
for any non-pointer devices.
2020-06-18 22:35:01 +02:00
Tudor Brindus 82c439c4f1 input/cursor: send idle events based off device type, not input type
Previously, a tablet or touch device could report activity as a pointer
device if it went through pointer emulation. This commit refactors idle
sources to be consistently reported based on the type of the device that
generated an input event, and now how that input event is being
processed.
2020-06-18 22:35:01 +02:00
Simon Ser e19bd1e474 Add support for viewporter
Depends on [1].

[1]: https://github.com/swaywm/wlroots/pull/2092
2020-06-17 10:18:58 -06:00
Brian Ashworth 33aa59d4c6 input/keyboard: wlr_keyboard_group enter and leave
This adds support for wlr_keyboard_group's enter and leave events. The
enter event just updates the keyboard's state. The leave event updates
the keyboard's state and if the surface was notified of a press event
for any of the keycodes, it is refocused so that it can pick up the
current keyboard state without triggering any keybinds.
2020-06-16 17:53:23 +02:00
Jason Nader 45859be03f i3-compat: add GET_BINDING_STATE IPC command 2020-06-14 00:55:14 -04:00
Tudor Brindus ed08f2f20c tree/view: fix smart gaps when ancestor container is tabbed or stacked
Fixes #5406.
2020-06-08 19:01:45 -04:00
Graham Christensen a974300652 swaynag: allow specifying more buttons which execute and dismiss
I don't love -z / -Z, but I figure this patch is far from being
accepted for other reasons too.
2020-06-09 00:00:14 +02:00
Tudor Brindus 53dc83fb68 tree/container: introduce container_toplevel_ancestor helper
This allows us to not have to explicitly write the same while loop
everywhere.
2020-06-07 10:46:14 +02:00
Tudor Brindus d7900c6e5e common/util: fix get_current_time_msec returning microseconds
This commit makes `get_current_time_msec` correctly return milliseconds
as opposed to microseconds. It also considers the value of `tv_sec`, so
we don't lose occasionally go back in time by one second. Finally, the
function is moved into `util.c` so that it can be reused elsewhere
without having to consider these pitfalls.
2020-06-06 13:38:41 +02:00
Kalyan Sriram e3e548a648
Save transform during transaction
Closes: https://github.com/swaywm/sway/issues/5412
2020-06-05 14:13:18 +02:00
Kenny Levinsen 5a4a7bc0da container: Remove useless surface dimensions
The adjustments to resize logic left them unnecessary.
2020-06-03 16:41:17 +02:00
Kenny Levinsen fcd0ab8f33 view: Save all buffers associated with view
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.

However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.

Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
2020-06-03 16:41:17 +02:00
Damien Tardy-Panis 0cbd26f0da Add views idle inhibition status in get_tree output
Fixes #5286
2020-05-29 17:29:41 -04:00
Tudor Brindus 6da1631090 input/cursor: rename simulated_tool_tip_down to be more accurate
This is a tiny cleanup commit that renames `simulated_tool_tip_down` to
`simulating_pointer_from_tool_tip`, making it match
`simulating_pointer_from_touch`.

This is a better name since it makes it clear that it's the *pointer*
that's being simulated, not the tool tip.
2020-05-29 08:44:56 +02:00
Tudor Brindus d71fed95da input/cursor: keep reference to cursor in constraint
set_region accepts a NULL *data, so we can't use it to reference the
constraint and find the cursor through its seat.

Fixes #5386.
2020-05-26 16:24:52 +02:00
Tudor Brindus 5d13f647f9 input/tablet: add seatop_down entry for tablet input
Currently, when tablet input exits a window during an implicit grab, it
passes focus to another window.

For instance, this is problematic when trying to drag a scrollbar, and
exiting the window — the scrollbar motion stops. Additionally,
without `focus_follows_mouse no`, the tablet passes focus to whatever
surface it goes over regardless of if there is an active implicit.

If the tablet is over a surface that does not bind tablet handlers, sway
will fall back to pointer emulation, and all of this works fine. It
probably should have consistent behavior between emulated and
not-emulated input, though.

This commit adds a condition for entering seatop_down when a tablet's
tool tip goes down, and exiting when it goes up. Since events won't be
routed through seatop_default, this prevents windows losing focus during
implicit grabs.

Closes #5302.
2020-05-25 10:01:00 +02:00
Érico Rolim 1d3681f521 Remove code related to the security features
- Remove struct definitions
- Remove struct members
- Remove initializations and frees
2020-05-21 10:57:00 +02:00
Martin Michlmayr 06fc42359b Fix typos in comments 2020-05-21 10:52:59 +02:00
Tudor Brindus 6f0a0bd385 input/pointer: only warp cursor when the confine region has changed
Refs #5268.
2020-05-21 10:45:08 +02:00
Michael Weiser 0f11aa037a commands: Add per-view shortcuts_inhibitor command
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.

Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-05-13 21:22:16 -04:00
David96 2473cac32c Implement pointer simulation if client hasn't bound to touch 2020-05-13 14:29:15 -04:00
Tudor Brindus 726d187d3c input/tablet: simplify parameter plumbing for tablet references
This is a small cleanup commit for removing `sway_tablet` parameters
from functions that already accept `sway_tablet_tool`, since the tablet
reference can be accessed through `tool->tablet`.
2020-05-10 16:49:35 +02:00
Tudor Brindus e262f93d0a input: rename pointer handlers to be unambiguous
This commit renames `motion` and `axis` handlers to `pointer_motion` and
`pointer_axis`, respectively, to disambiguate them from their tablet
(and future touch) handlers. `button` is left as-is, as it is generic
across input devices.
2020-05-02 18:28:06 +02:00
Tudor Brindus ae3ec745f8 input: refactor tablet motion into seatop handler
This commit moves tablet motion logic into a seatop handler.

As a side-effect of seatop implementations being able to receive
tablet motion events, fixes #5232.
2020-05-02 13:32:28 +02:00
Tudor Brindus 0dc1863dce input/cursor: make cursor rebasing cursor type-agnostic
This commit refactors `cursor_rebase` into `cursor_update_image`, and
moves sending pointer events to the two existing call sites. This will
enable this code to be reused for tablets.

Refs #5232
2020-05-02 13:32:28 +02:00
Simon Ser 5e5e5f2ee5 Add a secondary headless backend
This allows the create_output command to work on DRM too.
2020-05-01 17:00:14 +02:00
Tudor Brindus 2913f39dcb input/cursor: release simulated tool tip button when over v2 surface
d88460f addressed sending v2 tool tip up when over a non-v2 surface.
This commit addresses the other direction.

Fixes #5230.
2020-05-01 11:00:49 +02:00
Martin Dørum 4492e493e6 swaybar: Fix scrolling with precise trackpads 2020-04-28 21:46:37 +02:00
Tudor Brindus 44b2d3ad81 input/cursor: fix hide cursor timeouts on tablets and touchscreens
This commit refactors `cursor_handle_activity` to also take the idle
source, so that it can be reused for tablet and touch activity.
Previously, the timeouts would be tracked, but the cursor would never be
un-hidden for anything but pointers.

Fixes #5169.
2020-04-22 17:30:08 +02:00
Andri Yngvason 46599df0a2 input: Mark virtual devices as such
This is for internal configuration purposes
2020-04-14 12:07:24 +02:00
Simon Ser 4d13cee59a Use bitshifts for bitfields
Instead of hardcoded power of 2 values, use bitshifts. This makes the
enums more readable, avoids mistakes, and makes it clear how much of the
int32_t bit space we have left.

While at it, fix other minor style issues.
2020-04-10 18:08:46 -04:00
David96 8c62278207 Render layer shell popups over the top layer 2020-04-10 10:45:47 +02:00
Simon Ser 0cdcf66bbc Introduce test_output_config
This function checks whether the backend would accept an output
configuration, without applying the changes.
2020-04-08 16:36:40 +02:00
xdavidwu 4e1e5e4e33 im: make text-input listeners per text-input 2020-04-04 11:42:04 +02:00
xdavidwu 5886187c6e Port input method and text input from rootston
This ports swaywm/wlroots#1203, swaywm/wlroots#1303,
swaywm/wlroots#1308, swaywm/wlroots#1759 rootston part to sway.

Co-Authored-By: Leo Chen <leo881003@gmail.com>
2020-04-04 11:42:04 +02:00
Ian Fan 65501f0e46 tray: track SNI callbacks
This removes any pending messages once the item is destroyed.
Furthermore, this installs SNI event calbacks asynchronously
in order to prevent sd-bus from bypassing pending messages.
2020-03-30 17:31:00 +02:00
Ian Fan 68f53cd509 tray: tidy code
This includes some refactoring and fixing a small memory leak.
2020-03-30 17:31:00 +02:00
Ian Fan 3b894c387d tray: allow themes to inherit from multiple themes 2020-03-30 17:31:00 +02:00
Linus Heckemann df48c48123 add --no-repeat option for bindings
This allows e.g. triggering one command while a key is held, then
triggering another to undo the change performed by it afterwards. One
use case for this is triggering push-to-talk functionality for VoIP
tools without granting them full access to all input events.

Fixes #3151
2020-03-30 14:18:27 +02:00
Michael Weiser 3ee5aace33 commands: Add shortcuts_inhibitor command
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:

bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate

It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.

As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Michael Weiser eeac0aa170 input: Add support for keyboard shortcuts inhibit
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.

Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.

Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Michael Weiser ef9c597fcb config: Fix typo in reload bindsym flag bitmask
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced
in commit 152e30c37 so it can work as intended.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Simon Ser 5d692b0581 Add an adaptive_sync output command
This enables/disables adaptive synchronization on the output.

For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
2020-03-07 00:32:04 +01:00
Simon Ser 9d0aa0cb83 Use wlr_client_buffer
Update for breaking changes in [1].

[1]: https://github.com/swaywm/wlroots/pull/2043
2020-03-06 23:57:43 +01:00
Simon Ser 241684eb1d Drop sway_output.surface_needs_frame
wlr_output_schedule_frame now sets output->needs_frame [1], so this
isn't needed anymore.

[1]: https://github.com/swaywm/wlroots/pull/2053
2020-03-06 21:37:53 +01:00
Simon Ser c0811fcf87 Make handle_destroy and output_repaint_timer_handler static 2020-03-04 03:09:43 +01:00
Ryan Dwyer 2045ac3472 Introduce pid criteria token
This can be used as a workaround to flag terminal windows as urgent when
commands are completed, until urgency is introduced in the Wayland
protocol.

Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when
commands are completed, and use a terminal which uses one process per
window.
2020-02-27 14:03:22 +01:00
Simon Ser 5ed01c861a Add support for wlr-output-power-management-unstable-v1 2020-02-26 16:26:13 +01:00
Torstein Husebø af294289b1 treewide: fix typos 2020-02-18 21:53:57 +01:00
Brian Ashworth 8b593677d2 output: fix updating output manager config
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.

Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.

This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.

Additionally, this renames output_enable to output_configure to better
describe the recent changes.
2020-02-16 09:42:22 +01:00
Simon Ser f5fa0c7124 Stop calling apply_output_config from output_enable
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.

output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.

This change also allows us to avoid an extraneous wlr_output_commit.

References: https://github.com/swaywm/sway/issues/4921
2020-02-11 20:52:02 -05:00
Hristo Venev 7affe5c1bd swaybar: fix i3bar relative coordinates when scaling is used
24e8ba048a did not take scaling into account.
The hotspot size used pixel coordinates, the absolute coordinates were logical,
and the relative coordinates were completely wrong.

This commit makes all coordinates use logical values. If
`"float_event_coords":true` is sent in the handshake message, coordinates are
sent as floating-point values.

The "scale" field is an integer containing the scale value.
2020-02-10 18:58:09 +01:00
Hristo Venev fca32b6334 Do not truncate pointer coordinates to int.
This increases the precision of the clicks when using i3bar.
2020-02-10 18:58:09 +01:00
Anders 4e46bdf73d criteria: match containers without view
Closes #4929

Replaces criteria_get_views with criteria_get_containers which can
return containers without views when the criteria only contains
container properties.
2020-02-04 19:52:21 -05:00
thermitegod 29a5ce5f65 Fix compiling with -fno-common 2020-01-24 10:16:59 +01:00
Ronan Pigott d88d4bbd9d Fix crash when showing scratchpad hidden split containers 2020-01-16 21:48:25 -05:00
Simon Ser 0d2a3fa835 Revert "Make all the container dimensions integers"
This reverts commit 79c5f5ba12.

Fixes: https://github.com/swaywm/sway/issues/4908
2020-01-15 17:56:14 +01:00
Brian Ashworth c99d423ad9 view: remove workspace pid mapping for assigns
If a view is mapped to a workspace using an assign, the pid should still
be removed from the pid mapping list. This prevents child processes from
matching against it and mapping a view to a likely undesired workspace.
2020-01-09 09:52:37 +01:00
Brian Ashworth 897c36b12c input/cursor: handle image surface destroy
This adds a listener for the destroy event of the cursor image surface.
This prevents a use-after-free when the last visible image surface is
freed, there has not been a new cursor set, and the cursor is reshown.
2020-01-05 23:03:34 +01:00
Andri Yngvason 4c29a53386 swaynag: Add multi-seat support
This also adds cleanup for all seat resources
2020-01-05 19:57:05 +01:00
Pedro Côrte-Real 79c5f5ba12 Make all the container dimensions integers
Containers are always fixed to the pixel grid so position and size them
with integers instead of doubles.

Functionally this should be no different since rounding down is already
being done on things like layout. But it makes it clear what the
intention is and avoids bugs where fractional pixels are used. The
translating and moving code is still using doubles because the cursors
can have fractional pixels and thus the code is plumbed that way. But
that could also probably be changed easily by doing the integer
conversions earlier and plumbing with int.
2020-01-01 10:14:40 -07:00
Pedro Côrte-Real 8008344762 Avoid numerical instability in resize
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.

To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:

1. For the container we are actually resizing using floor() might result
   in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
   and then if the container being resized is the last all those extra
   pixels would make the resize too large.

Fixes #4391
2020-01-01 10:14:29 -07:00
Josef Gajdusek f501a60c14 Add virtual pointer protocol 2019-12-31 16:04:50 +01:00
Brian Ashworth f898ca9a83 bar_cmd_colors: remove add_color
This is the third commit in a series of commits to refactor color
handling in sway. This removes add_color from commands.c. It was only
being used by bar_cmd_colors. This also changes the functions to use
parse_color which is used to validate rgb(a) colors throughout the code
base and is also what i3bar is using to parse the colors after they are
passed over ipc. After parsing the color and ensuring it is valid, the
rgba hex string is then generated using snprintf. This refactor also
ensures that all the colors for the command are valid before applying
any of them.
2019-12-28 10:07:25 +01:00
Brian Ashworth 66dc33296c cmd_client_*: refactor duplicated code
This is the second in a series of commits to refactor the color handling
in sway. This removes the duplicated color parsing code in
sway/commands/client.c. Additionally, this combines the parsing of
colors to float arrays with that in sway/config.c and introduces a
color_to_rgba function in commom/util.c.

As an added bonus, this also makes it so non of the colors in a border
color class will be changed unless all of the colors specified are
valid. This ensures that an invalid command does not get partially
applied.
2019-12-28 10:07:25 +01:00
Brian Ashworth 97f9f0b699 parse_color: return success + drop fallback color
This is the first in a series of commits to refactor the color handling
in sway. This changes parse_color to return whether it was success and
no longer uses 0xFFFFFFFF as the fallback color. This also verifies that
the string actually contains a valid hexadecimal number along with
the length checks.

In the process of altering the calls to parse_color, I also took the
opportunity to heavily refactor swaybar's ipc_parse_colors function.
This allowed for several lines of duplicated code to be removed.
2019-12-28 10:07:25 +01:00
Brian Ashworth 452a615bb8 seat_cmd_keyboard_grouping: change keymap to smart
This removes `seat <seat> keyboard_grouping keymap` and replaces it with
`seat <seat> keyboard_grouping smart`. The smart keyboard grouping will
group based on both the keymap and repeat info. The reasoning for this
is that deciding what the repeat info should be for a group is either
arbitrary or non-deterministic when multiple keyboards in the group have
repeat info configured (unless somehow exposed to the user in a
reproducible uniquely identifiable fashion).
2019-12-16 12:03:11 -05:00
Drew DeVault 2f3c6cccf5 Add seat <seat> idle_{inhibit,wake} <sources...>
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.

An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
2019-12-12 10:37:30 -05:00
Benjamin Cheng 9ef026e804 input/cursor: pass gesture events to clients
Some wayland clients (mostly GTK3 apps) like eog or evince support
gestures like pinch-to-zoom. These gestures are given to clients
via the pointer_gestures_v1 protocol. This is already supported in
wlroots, so we just need to hook up the events here in sway.

Fixes #4724
2019-12-07 12:26:21 -05:00
Kenny Levinsen d1eab10266 output: Schedule idle frames if we do not render
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.

If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.

If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.

To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.

Fixes #4768
2019-12-01 12:44:07 +01:00
Ronan Pigott 6968fb3123 add scale_filter output config option 2019-11-29 18:13:37 +01:00
Brian Ashworth 5d882cb5fc Add support for wlr_keyboard_group
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.

This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
2019-11-21 10:42:10 -05:00
Brian Ashworth 2f858a1ada input_cmd_xkb_file: allow shell path expansion
This allows for shell path expansion for input_cmd_xkb_file. The logic
has been extracted from output_cmd_background
2019-11-21 10:36:15 -05:00
Ivan Molodetskikh bd9a53f1a3 view: add max_render_time 2019-11-17 20:18:42 +01:00
Ivan Molodetskikh 5421198489 Add sway_surface
For extending wlr_surface with additional things.
2019-11-17 20:18:42 +01:00
Ivan Molodetskikh 022df2542b output: add max_render_time 2019-11-17 20:18:42 +01:00
Tadeo Kondrak 7f54495b5e Use an enum instead of a marker string for map_to_ 2019-11-17 13:34:24 +01:00
Tadeo Kondrak 4829f1c26a Implement input map_to_region command 2019-11-17 13:34:24 +01:00
Ronan Pigott 3975ca28c2 smart_borders: separate smartness from edge types 2019-11-04 21:16:27 -05:00
Simon Ser 38b37247ff Add --custom to output mode command
This forces to set the mode as a custom mode.
2019-11-04 19:40:47 -05:00
Sheena Artrip 7efb5d4673 Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.
set_cloexec is defined by both sway and wlroots (and who-knows-else),
so rename the sway one for supporting static linkage. We also remove
the duplicate version of this in client/.

Fixes: https://github.com/swaywm/sway/issues/4677
2019-11-01 12:41:08 -04:00
Simon Ser ad07886543 Handle layer changes for layer shell surfaces
Closes: https://github.com/swaywm/sway/issues/4644
References: 1982106c9b
2019-10-27 11:07:18 -04:00
Ronan Pigott 7c9b71f5c6 criteria: make literal comparison for __focused__ values 2019-10-27 11:06:05 -04:00
Simon Ser ec14a00e8c Fix segfault in wlr_output_manager_v1_set_configuration
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.

When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.

Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.

Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27 10:51:02 -04:00
Simon Ser 58a40ce07b Fix apply_output_config return value when enabling output
apply_output_config would call output_enable and always return true,
even if the output couldn't be enabled.
2019-10-27 10:51:02 -04:00
Konstantin Pospelov fa0abaf7cf swaybar: do not retry search for tray icons
In case a tray icon cannot be found or does not have a desirable size,
swaybar retries the search again and again, which increases load on disk
and CPU. This commit solves it by storing target_size for each icon, so
that swaybar does not search for an icon of some size if it already tried to.

Fixes #3789.
2019-10-21 17:22:25 +02:00
lbonn 3ee3a9ef60 focus: support focus_wrapping workspace
Following i3 support: https://github.com/i3/i3/pull/3407
2019-10-17 13:48:52 +03:00
John Chadwick 7e420cb6e4 input: Add support for tablet protocol.
Sway has basic support for drawing tablets, but does not expose
properties such as pressure sensitivity. This implements the wlr tablet
v2 protocol, providing tablet events to Wayland clients.
2019-09-25 23:10:33 -04:00
Aleksis 982e01f46c remove unused layer shell surface variable 2019-09-07 20:22:54 +03:00
Brian Ashworth 1fd2c6ba49 swaybar: complete barconfig_update event handling
This adds complete support for the barconfig_update ipc event. This also
changes the bar command and subcommand handlers to correctly emit the
event. This makes it so all bar subcommands other than id and
swaybar_command are dynamically changeable at runtime. sway-bar.5 has
been updated accordingly
2019-09-04 16:48:50 -10:00
Ben Brown b46c53957f Fix typo for the force/immediate option in xwayland_mode enum 2019-09-02 17:06:38 +03:00
Brian Ashworth ff7d979d99 cmd_xwayland: add force for immediate launch
This just adds a force option to cmd_xwayland that allows for xwayland
to be immediately launched instead of lazily launched. This is useful
for slower machines so it can be part of the startup time instead of
when the user is actively trying to use it
2019-08-20 11:34:34 +09:00
Brian Ashworth 384afc5cb5 input/keyboard: send released only if pressed sent
This keeps track of whether surfaces received a key press event and
will only send a key release event if the pressed event was sent. This
also requires changing the keycodes that are sent via wl_keyboard_enter
to only include those that were previously sent. This makes it so
surfaces do not receive key release events for keys that they never
received a key press for and makes it so switching focus doesn't leak
keycodes that were consumed by bindings.
2019-08-20 11:14:56 +09:00
Simon Ser 7488d33d42 Remove xdg-shell v6 support
All major toolkits and apps have gained xdg-shell stable support.

Closes: https://github.com/swaywm/sway/issues/3690
2019-08-20 10:57:20 +09:00
Drew DeVault cb8f68d74b layer-shell: add support for popups 2019-08-14 22:10:05 +03:00
Brian Ashworth 8ee054b1b9 bindsym/code: add group support
This adds support for specifying a binding for a specific group. Any
binding without a group listed will be available in all groups. The
priority for matching bindings is as follows: input device, group, and
locked state.

For full compatibility with i3, this also adds Mode_switch as an alias
for Group2. Since i3 only supports this for backwards compatibility
with older versions of i3, it is implemented here, but not documented.
2019-08-01 18:54:58 +03:00
Simon Ser f984f21b6a Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.

This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
2019-07-27 17:16:56 -04:00
Ashkan Kiani e4bba906b6 Avoid adding duplicate criteria for no_focus and command 2019-07-27 03:53:05 +03:00
Brian Ashworth 1a16262903 ipc: add input::libinput_config event
This adds a libinput_config change type to the input event for when
the libinput config for a device changes

In order for this to be possible to track, the libinput config code
had to be refactored. It is now extracted into a separate file to
isolate it from the rest of the input management code.
2019-07-23 20:45:46 +03:00
Brian Ashworth 6effca7b61 ipc: add an input event
This adds an ipc event related to input devices. Currently the
following changes are supported:
- added: when an input device becomes available
- removed: when an input device is no longer available
- xkb_keymap_changed: (keyboards only) the keymap changed
- xkb_layout_changed: (keyboards only) the effective layout changed
2019-07-23 20:45:46 +03:00
Ed Younis eb770e88b7 Implement input_cmd_xkb_file (#3999)
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
2019-07-17 19:26:58 -04:00
Josef Gajdusek ac87df23ea Update output manager on layout change
The output manager config was not properly updated if the position
of the output got changed.
2019-07-17 19:36:15 +03:00
Pedro Côrte-Real 44c2fafa4f Sanity check gaps between tiled containers
When the gaps become too large for the space available gracefully
reduced them all the way to 0 if needed.

Fixes #4294
2019-07-15 23:46:27 -04:00
Pedro Côrte-Real d0233af3b3 Rework gaps code to be simpler and correct
Instead of tracking gaps per child apply gaps in two logical places:

1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.

Fixes #4296
2019-07-15 23:46:27 -04:00
Manuel Stoeckl 2dc4978d8a Use -fmacro-prefix-map to strip build path
Because meson does not provide a simple way to get the relative build
path, it is computed with a pair of foreach loops. As meson does not
have a simple way to compute string length (except via underscorify
and 63 split operations), the build script uses a shell command
instead.

If the compiler does not suppot -fmacro-prefix-map, then fall back
to passing in the relative path prefix, and use its length to offset
the uses of __FILE__ in log messages so that the build path is at
least still not included in the logs. This is significantly more
efficient than calling _sway_strip_path.
2019-07-15 16:35:50 -04:00
Pedro Côrte-Real e3a3917d3a Layout tiled using a width/height fraction
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.

To do this several parts are reworked:

- The vertical and horizontal arrangement code is ajusted to work with
  fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
  working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
  match. The adjusted parts are container split, swap, and the input
  seat code.

It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.

Fixes #3547
Fixes #4297
2019-07-14 11:13:55 -04:00
Brian Ashworth 152e30c374 cmd_bindswitch: add option to execute on reload
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to  allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
2019-07-09 10:00:57 +03:00
Sebastian Parborg 538b36c0e2 Make mouse drag in tiled mode swap containers if no edge is selected
Now the highlighted center area of containers triggers a swap action
instead of moving around the containers.
2019-07-09 02:56:55 -04:00
Sergei Dolgov 01ec18e802 Add calibration_matrix config option
Can be used to change the orientation of a touchscreen.

Example usage with swaymsg:

    # identity
    swaymsg input type:touch calibration_matrix '"1 0 0 0 1 0"'

    # 90 degree clockwise
    swaymsg input type:touch calibration_matrix '"0 -1 1 1 0 0"'

    # 180 degree clockwise
    swaymsg input type:touch calibration_matrix '"-1 0 1 0 -1 1"'

    # 270 degree clockwise
    swaymsg input type:touch calibration_matrix '"0 1 0 -1 0 1"'

Documentation:

    https://wayland.freedesktop.org/libinput/doc/latest/absolute-axes.html#calibration-of-absolute-devices
2019-07-05 18:41:56 +03:00
Brian Ashworth c346c020bf config: fix find_handler logic
Without this change, the handlers listed in the config_handlers or
command_handlers arrays (depending on reading or active) in commands.c
would be valid subcommands. To make matters worse, they would also take
precedence over the defined subcommand handlers.

This corrects find_handler to only work on the handler array given
instead of implicitly trying others.
2019-06-20 10:13:58 +03:00
Rouven Czerwinski ddad41f423 Fix sway crashes for scratchpad layouts
Currently container_replace removes the container from the scratchpad
and re-adds it afterwards. For the split commands this results in the
container being send to the scratchpad, which results in a NULL segfault
if the same container should be shown.
Pass an optional workspace to root_scratchpad_add_container, if the
workspace is passed the window will continue to show on the workspace.
If NULL is passed it is sent to the scratchpad.
This was an issue if no other window except the scratchpad container was
on the workspace.

Fixes #4240
2019-06-16 12:29:16 -04:00
Brian Ashworth 9670ccee68 bindings: defer while initiailizing
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
2019-06-12 07:56:41 +03:00
Matt Coffin 2b5bf78faf Fix segfaults caused by faulty command parsing
This patch fixes faulty command parsing introduced by
f0f5de9a9e. When that commit allowed
criteria reset on ';' delimeters in commands lists, it failed to account
for its inner ','-parsing loop eating threw the entire rest of the
string.

This patch refactors argsep to use a list of multiple separators, and
(optionally) return the separator that it matched against in this
iteration via a pointer. This allows it to hint at the command parser
which separator was used at the end of the last command, allowing it to
trigger a potential secondary read of the criteria.

Fixes #4239
2019-06-11 14:40:36 -04:00
Simon Ser 2bccb387d8 Add a new xkb_switch_layout command
This allows users to programatically change the active layout.
2019-06-09 15:20:14 -04:00
Brian Ashworth 5b1a8d62b9 config/input: validate xkb keymap before storing
This allows for an optional validation stage when storing an input
config. Currently, only the xkb keymap is validated. If storing the
delta input config will result in any invalid xkb keymaps, the input
config will not be stored and error will be populated with the first
line of the xkbcommon log.
2019-06-09 20:13:22 +03:00
Brian Ashworth be2d2a299a commands/input: perform basic keymap validation
Before the delta input config is stored, this attempts to compile a
keymap with it. If the keymap fails to compile, then the first line of
the xkbcommon log entry will be included with a `CMD_FAILURE`, the
entire xkbcommon log entry will be included in the sway error log, and
the delta will not be stored.

This only handles basic issues such as a layouts not existing. This
will NOT catch more complex issues such as when a variant does
exist, but not for the given layout (ex: `azerty` is a valid variant,
but the `us` layout does not have a `azerty` variant).
2019-06-09 20:13:22 +03:00
Daniel Eklöf 190546fd31 add seat sub command 'xcursor_theme'
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.

The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
2019-06-05 11:00:10 -04:00
Kenny Levinsen 4925882920 Use parent get_root_coords in subsurfaces
Subsurfaces need access to the parent get_root_coords impl for positioning in
popups. To do this, we store a reference to the parent view_child where
applicable.

Fixes #4191.
2019-05-30 14:25:07 -04:00
Josef Gajdusek b3a5effef2 Implement wlr-output-management-v1 2019-05-24 18:59:14 +03:00
Brian Ashworth 23c64ab22d input/keyboard: attempt default keymap on failure
This attempts to use the default keymap when the one defined in the
input config fails to compile. The goal is to make it so the keyboard
is always in a usable state, even if it is not the user's requested
settings as usability is more important.

This also removes the calls to `getenv` for the `XKB_DEFAULT_*` family
of environment variables. The reasoning is libxkbcommon will fallback
to using those (and then the system defaults) when any of the rule
names are `NULL` or an empty string anyway so there is no need for
sway to duplicate the efforts.
2019-05-14 08:23:26 -06:00
Moelf ed2e553b8d Implement output toggle
discussed in #4136, this can't handle wildcard but won't crash.
2019-05-14 00:11:04 -04:00
Brian Ashworth 18ce0eec60 Spawn swaybar as a wayland client
This just makes it so swaybar is handled as a wayland client
2019-05-12 11:02:42 +03:00
Konstantin Pospelov c42497aca0 bindsym: change xkb_rule_names initialization 2019-04-26 20:56:48 +03:00
Konstantin Pospelov ddf63ffabe bindsym: consider xkb_rule_names for --to-code 2019-04-26 20:56:48 +03:00
Konstantin Pospelov f1609abe4c config: simplify keysym translation fields
Do not store `xkb_keymap` since it can be retrieved from `xkb_state`.
2019-04-26 20:56:48 +03:00
Konstantin Pospelov a09c144b8b Implement bindsym --to-code
* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
2019-04-26 20:56:48 +03:00
Drew DeVault 236ca63419 swaybg: split into standalone project
The new upstream is https://github.com/swaywm/swaybg

This commit also refactors our use of gdk-pixbuf a bit, since the only
remaining reverse dependency is swaybar tray support.
2019-04-25 18:44:28 +03:00
Brian Ashworth dc7a3930a7 swaybar: add multiseat support
This just adds multiseat support to swaybar
2019-04-24 07:16:37 -06:00
Brian Ashworth 583ceff6f6 swaybar: hide mode visibility improvements
This allows swaybar to become visible when the mode changes (to any
mode other than the default). swaybar will be hidden again when the
modifier is pressed and released or when switching back to the default
mode.

This also applies the same logic to visible by urgency to hide swaybar
when the modifier is pressed and released.

These changes are to match i3's behavior.
2019-04-24 07:14:48 -06:00
Brian Ashworth 9099adbbe6 swaynag: revamp type configs
This revamps the type configs for swaynag. All sizing attributes for
swaynag are now `ssize_t` instead of `uint32_t` to allow for a default
value of `-1`, which allows for `0` to be a valid value. Additionally,
the initialization of the type configs has been changed from a simple
calloc to use a new function `swaynag_type_new`. `swaynag_type_new`
calloc's the memory, checks for an allocation failure, sets the name,
and all sizes to -1. The layering order has also been changed to
default, general config, type config, and as highest priority command
line arguments. Finally, `swaynag_type_merge` has been modified to
handle the layering and sizing changes.
2019-04-20 09:14:41 -06:00
Alex Maese 35ddd9aab3 Add unbindsym/unbindcode command for swaybar 2019-04-17 23:29:43 -04:00
Alex Maese 8d4f8aea46 Add unbindswitch command 2019-04-17 23:29:43 -04:00
Alex Maese 852f1f0b34 Create unbindsym and unbindcode commands 2019-04-17 23:29:43 -04:00
Brian Ashworth d7d29fe546 swaymsg: add timeout and type checks
This adds a 3 second timeout to the initial reply in swaymsg. This
prevents swaymsg from hanging when `swaymsg -t get_{inputs,seats}` is
used in i3. The timeout is removed when waiting for a subscribed event
or monitoring for subscribed events.

This also adds type checks to commands where i3 does not reply with all
of the properties that sway does (such as `modes` in `get_outputs`).

This is mostly just a behavioral adjustment since swaymsg should run on
i3. When running under i3, some command reply's (such as the one for
`get_outputs) may have more useful information in the raw json than the
pretty printed version.
2019-04-17 09:07:08 +03:00
Connor E b2cfcebef6 Add deprecation warnings for new_float, new_window, and force_focus_wrapping. 2019-04-14 20:44:12 -04:00
Benjamin Cheng bd3720585e Implement input type configs (#3784)
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.

When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
2019-04-14 19:31:36 -04:00
Benjamin Cheng 6737b90cb9 Add heuristics to differentiate touchpads
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.

swaymsg is also updated to reflect the new touchpad type.
2019-04-14 19:31:36 -04:00
Brian Ashworth 6961bf2e4c Spawn swaynag as a wayland client
This spawns swaynag as a wayland client similar to how swaybar and
swaybg are already done
2019-04-14 12:41:59 +03:00
Brian Ashworth 69a1a0ff99 Fix scratchpad fullscreen behavior and crash
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.

This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
  into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
  scratchpad, it will be fullscreen when shown (and fullscreen disabled
  when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
  scratchpad, it will be shown immediately as fullscreen global. The
  container is not moved to a workspace and remains in the
  scratchpad. The container will be visible until fullscreen disabled
  or killed. Since the container is in the scratchpad, running
  `scratchpad show` or `move container to scratchpad` will have no
  effect

This also changes `container_replace` to transfer fullscreen and
scratchpad status.
2019-04-13 08:48:37 -06:00
Brian Ashworth 195226120f Honor output for xdg_toplevel_set_fullscreen
This honors the fullscreen output request for
`xdg_toplevel_set_fullscreen` and `zxdg_toplevel_v6_set_fullscreen`.

If the request was sent before mapping, the fullscreen output request
will be retrieved from the client_pending state for the toplevel. The
output will be passed to `view_map` and if there is a workspace on the
output, the view will be placed on that workspace.

If the request comes in after being mapped, the view will be moved to
the workspace on the output (if there is one) before becoming
fullscreen.
2019-04-11 09:18:48 -06:00
Brian Ashworth 75e7bd24cc swaybg: one instance for all outputs
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
2019-04-04 20:08:21 +03:00
Brian Ashworth 679c058fac scratchpad: set initial size
This matches i3's behavior of setting scratchpad containers to 50% of
the workspace's width and 75% of the workspace's height, bound by the
minimum and maximum floating width/height.
2019-03-31 17:49:05 -06:00
Brian Ashworth dd28e6a6d6 Fix xwayland configure request scratchpad crash
This fixes a crash in `container_init_floating` when a xwayland view
sends a configure request while in the scratchpad.

`container_init_floating` gets called so the configured minimum and
maximum sizes gets respected when resizing to the requested size. Since
the workspace was NULL, it would SIGSEGV when attempting to get the
workspace's output for the output box retrieval.

This extracts the resizing portion of `container_init_floating` into a
separate function. If the container is in the scratchpad, it will just
be resized and skip the centering.

Additionally, `container_init_floating` has been renamed to
`container_floating_resize_and_center` to more accurately describe what
it does.
2019-03-31 09:32:23 +03:00
Brian Ashworth d9de5b8758 Implement inhibit_idle command
This implements the following command to set/unset a user idle
inhibitor for a view:
`inhibit_idle focus|fullscreen|open|none|visible`

The modes are as follows:
- focus: inhibited when the view is focused by any seat
- fullscreen: inhibited when the view is fullscreen (or a descendant of
  a fullscreen container) and is visible on any output
- open: inhibited until the view is closed or the inhibitor is unset or
  changed
- none: unsets any user set idle inhibitors for the view
- visible: inhibited when the view is visible on any output

This should have no effect on idle inhibitors set by the applications
themselves and those should still work as intended.

Since this operates on the view in the handler context, it is possible
to set it on the currently focused view, on any existing view with
criteria, or for any future view with for_window.
2019-03-24 19:26:12 -06:00
Geoff Greer 6e3046878d Add support for manually setting subpixel hinting on outputs.
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this.

Addresses https://github.com/swaywm/sway/issues/3163
2019-03-24 09:37:24 +02:00
mliszcz 200833caae Allow for workspace renaming during exec handling
This change adds support for renaming a workspace when `exec` command
is being processed by keeping sway_workspace and pid_workspace names in
sync.

The change can be verified by running following command:

swaymsg exec <application>; swaymsg rename workspace number 1 to 5

Fixes: #3952
2019-03-23 17:49:27 -04:00
Brian Ashworth 7d2076cbff criteria: fix __focused__ when no focus or unset
This fixes the behavior of `__focused__` when there is no focused view
to match i3's behavior of successfully matching no views instead of
returning an error of a missing value. It also applies the same logic
when a token is not applicable (or unset) for a view such as `app_id`
for a focused xwayland view or `class` for a focused xdg-shell view.

This adds an `autofail` boolean to `struct criteria`. If it is set to
`true`, then `criteria_matches_view` will immediately bail out as a
no match. If `autofail` is set, the criteria will also not be
considered empty by `criteria_is_empty`.

To set this new `autofail` property, `get_focused_prop` will now take
in a boolean pointer of the same name. If `__focused__` is supported
for the token and there is no focused view or the focused view does not
have a value for the token, then the boolean will be set to true. In
`parse_token`, the boolean value will be checked and if set to true,
then `criteria->autofail` will be set to true and `parse_token` will
bail successfully. Tokens will still be parsed to make sure the whole
criteria is syntactically valid, which is also why
`&criteria->autofail` is not passed to `get_focused_prop` and a local
boolean is declared in `parse_token`.
2019-03-23 09:53:23 +02:00
Ryan Walklin bdb402404c Support WLR_INPUT_DEVICE_SWITCH in sway
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.

Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>

Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID

<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE

(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
2019-03-19 23:58:47 -04:00
Ryan Dwyer e9a476244d Remove debug tree
This feature has served its purpose. It's better to use IPC now.
2019-03-18 11:29:19 -04:00
Ryan Dwyer 7b9ae42331 Introduce default seatop
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.

The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.

Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.

The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.

The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.

The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.

The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.

The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
2019-03-17 10:02:04 -06:00
Ryan Dwyer fb3475e291 Replace seatup allows_events with button callback 2019-03-17 10:02:04 -06:00
Brian Ashworth 3106ef23a7 Fix output config retrieval for new outputs
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.

This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output

Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
2019-03-16 10:40:46 -06:00
Brian Ashworth 52a61671e9 criteria: change workspace to support regex
This changes the workspace criteria to support regex instead of basic
strings. This matches i3's behavior.
2019-03-12 20:52:09 -06:00
emersion 076257a978 Stop using wlr_output->{lx,ly}
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes
output_get_in_direction adding buffer coords to layout coords.
2019-03-11 12:43:01 -04:00
Ryan Dwyer d16845d5f0 Don't send button events to surfaces when dragging or resizing
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.

The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
2019-03-11 14:55:54 +01:00
Ian Fan 5c8424c074 stringop.c: remove unused functions
The only use of `join_list` in swaybar/tray/icon.c has been rewritten.
2019-03-11 14:42:58 +01:00
Brian Ashworth 017a7c4da1 sway_view_child: add listener for view unmap
Since not all child views's have an unmap event, it is possible for it
to still be mapped (default state) in the destruction handler. When
the destruction handler is called, the corresponding view may have
already been freed and the memory location reallocated. This adds a
listener for the view unmapping and removes the mapped status. This
ensures that the child view is damaged due to destruction while the
view still exists and not after.
2019-03-11 10:02:52 +01:00
Brian Ashworth 430359519c floating_maximum_size: change default behavior
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.

This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
2019-03-02 09:10:26 +01:00
emersion 88b283c557 seat: don't send button release when not pressed
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.

This commit moves the logic used to send pressed/released into the "down"
operation.
2019-02-28 23:02:06 -05:00
Milkey Mouse 2f7247e08a swaybar: add overlay mode (fix #1620)
Overlay mode puts the bar above normal windows and passes through/ignores any
touch/mouse/keyboard events that would be sent to it.
2019-02-24 20:05:47 -05:00
db 2510e3df38 add --i3 flag to hide_edge_borders
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.

Related issues and merge requests: #3031, #3002, #2912, #2987.
2019-02-24 15:26:37 -05:00
Connor E d4b1e71b91 Make load_include_configs void. Fix some cases where WD would not be restored. 2019-02-24 00:01:35 -05:00
Drew DeVault 4599907de7 swaybar: process hotspots on touch tap 2019-02-23 20:00:20 +01:00
emersion 656541bcc4
Update for swaywm/wlroots#1517 2019-02-23 19:04:10 +01:00
Drew DeVault 487c83f0de Add workspace {prev,next}_on_output --create
This creates the next workspace if you hit the end.
2019-02-17 11:50:07 -05:00
Drew DeVault cd10e755c1 Remove refs to unimplemented debuglog command
Closes #3695
2019-02-17 09:52:19 -05:00
emersion 7baaa3a0f8 Disconnect swaybg instead of killing it
This is much more reliable. This also fixes race conditions when killing swaybg
while it's doing a wl_display_roundtrip.
2019-02-16 19:11:22 -05:00
emersion 8ab64d3fcc Remove unused header include/sway/tree/output.h 2019-02-16 17:40:56 -05:00
Brian Ashworth 272ca06171 Fix reload freeze when not modsetting current mode
This fixes the issue of the display freezing on reload with
wlroots#1545.

On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.

However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.

This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
2019-02-16 23:37:36 +01:00
Ian Fan 5484f308b9 swaybar: prevent signal handler from firing during termination
This prevents a heap-use-after-free crash when sway terminates.
2019-02-15 14:09:14 +00:00
emersion 97c89b24b8
Rebase cursor when a layer surface maps
Also removes an extraneous arrange_outputs call, it's already called if
necessary in arrange_layers.

Updates https://github.com/swaywm/sway/issues/3080
2019-02-12 22:57:23 +01:00
Brian Ashworth 7299b9a6ca seat_cmd_cursor: do not create non-existing seat
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.

This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
2019-02-03 14:01:29 -05:00
Brian Ashworth ebe5399ed6 pointer_constraint: change to a seat subcommand
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.

This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
2019-01-31 22:58:52 -05:00
v44r 204e1f4712 Rebase #1636 against current master 2019-01-31 15:37:57 +01:00
Drew DeVault a6d41254c9 Add pointer_constraint command 2019-01-30 19:53:59 +01:00
absrd ee4b8a3938 Add relative pointer 2019-01-30 19:53:59 +01:00
Las cedde21c96 Implement pointer-constraints-unstable-v1 2019-01-30 19:53:59 +01:00
Brian Ashworth f0fd6119cf Cleanup config reading failure error logs
This cleans up the log when sway fails to read a config file. The
following changes have been made:
- A missing error message has been added to the log when the config file
is a directory instead of a regular file
- In main, `goto` statements have been added after the `sway_terminate`
calls instead of wrapping every block in `if (!terminate_request)`
- Unnecessary NULL-checks around calls to free in `main` have been
removed
- Deferred command execution has been extracted to a separate function
and the `Running deferred commands` log message will not be shown when
there are no deferred commands.
2019-01-29 13:18:53 -05:00
Ryan Dwyer 6b8bf10941 Introduce container_is_scratchpad_hidden
Just a convenience function that improves readability of the code.

Other things worth noting:

* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
2019-01-28 10:35:40 +01:00
Ryan Dwyer 0a9ff774ad Center surface inside container when it's too small
The goal here is to center fullscreen views when they are both too small
for the output and refuse to resize to the output's dimensions. It has
the side effect of also centering the view when it's too small for its
container.

Example clients that have this behaviour are emersion's hello-wayland
and weston.

It works by introducing surface_{x,y,width,height} properties to the
container struct. The x and y represent layout-local coordinates where
the surface will be rendered. The width and height are only used to
track the surface's previous dimensions so we can detect when the client
has resized it and recenter and apply damage accordingly.

The new surface properties are calculated when a transaction is applied,
as well as when a view resizes itself unexpectedly. The latter is done
in view_update_size. This function was previously restricted to views
which are floating, but can now be called for any views.

For views which refuse to resize *smaller* than a particular size, such
as gnome-calculator, the surface is still anchored to the top left as
per the current behaviour.
2019-01-28 01:17:21 -05:00
Drew DeVault 783fadab28
Merge pull request #3423 from RyanDwyer/fullscreen-global
Implement fullscreen global
2019-01-27 18:06:50 -05:00
emersion a452f8f822
Update for swaywm/wlroots#1503 2019-01-27 12:59:46 +01:00
Ryan Dwyer 20aa8ee67d Implement fullscreen global 2019-01-25 08:29:21 +10:00
emersion 75406bb93b Update for swaywm/wlroots#1402 2019-01-24 11:48:19 +01:00
Jan Beich ba96983bf0 Make json-c include respect pkg-config --cflags
json-c.pc contains `Cflags: -I${includedir}/json-c`, so `<json-c/json.h>`
won't be found unless the parent directory is searched by default.
2019-01-23 21:50:06 -05:00
Ian Fan de9a357de8 util.c: remove numlen function
Its uses have been replaced by snprintf, which is more in line with its usage.
2019-01-22 13:10:25 +01:00
Ryan Dwyer 2301349ad5 Use noop output when there's no outputs connected
Instead of having NULL workspace->output pointers, use a noop output.
This should be safer.
2019-01-22 09:55:13 +01:00
M Stoeckl 4b1eaaf731 Removed unused wlroots dependency for sway(bg|bar|msg|nag)
Also remove direct libm dependency where unused.
2019-01-21 13:04:15 -05:00
M Stoeckl d7ff776552 Move sway-specific functions in common/util.c into sway/
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
2019-01-21 12:39:16 -05:00
M Stoeckl 1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
emersion a737d7ecc4
Better handle outputs without CRTC
This happens if you plug in more outputs than supported by your GPU.

This patch makes it so outputs without CRTCs appear as disabled. As soon as
they get a CRTC (signalled via the mode event), we can enable them.
2019-01-18 10:09:10 +01:00
emersion dc1eac0cf1 output: remove output_add_listeners
Simplify the code by registering signals when outputs are created and removing
signals when they are destroyed.
2019-01-18 10:08:34 +01:00
emersion f951c2357f
Remove unicode.c 2019-01-17 12:45:41 +01:00
emersion b29d19bf0d
Remove swaylock headers 2019-01-17 10:26:42 +01:00
Brian Ashworth 02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Ryan Dwyer 2024f1da72 Resize only current and immediate siblings rather than all siblings
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.

To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.

During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.

In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.

container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
2019-01-15 08:01:21 +10:00
Brian Ashworth 2573606b60 Disarm key repeat on reload
When resetting the keyboard during reload, disarm the key repeat on all
keyboards since the bindings (and possibly keyboard) will be freed before
the key repeat can go off.
2019-01-14 20:15:23 +01:00
M Stoeckl 2a684cad5f Remove now-unused "input" argument of cmd_results_new
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.

String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
2019-01-14 08:05:29 -05:00
M Stoeckl 6d392150a7 Remove 'input' field of IPC command return json
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
2019-01-14 07:58:02 -05:00
Drew DeVault 4879d40695
Merge pull request #3144 from emersion/cmd-xwayland
Add xwayland command
2019-01-13 20:42:39 -05:00
Drew DeVault 81bb675274
Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improved
Improve mouse button parsing: bar mouse bindings
2019-01-13 20:41:05 -05:00
Drew DeVault 9f9ef76175
Merge pull request #3343 from RedSoxFan/seat-cursor-buttons-improved
Improve mouse button parsing: seat cursor buttons
2019-01-13 20:40:42 -05:00
Drew DeVault 23ab56bbf7
Merge pull request #3402 from RyanDwyer/refactor-seatops
Refactor seat operations to use an interface
2019-01-13 20:38:34 -05:00
Drew DeVault 08569aab36
Merge pull request #3388 from RedSoxFan/reset-inputs-on-reload
reload: reset input configs
2019-01-13 20:37:05 -05:00
Drew DeVault 9ce4d53e78
Merge pull request #3408 from RedSoxFan/bar-padding
swaybar: adjustable status padding
2019-01-13 20:34:13 -05:00
Brian Ashworth 50d36ef238 swaybar: allow identifiers for output and tray
This allows `bar output` and `bar tray_output` to specify an output
identifier. Output names should still work as well.

This parses the output identifier from the xdg_output description,
which wlroots currently sets to `make model serial (name)`. Since this
could change in the future, all identifier comparisons are guarded by
NULL-checks in case the description cannot be parsed to an identifier.
2019-01-13 12:06:35 -05:00
Brian Ashworth ca0a75d540 swaybar: add status_edge_padding command
This adds the bar subcommand `status_edge_padding <padding>` to set the
padding used when the status line is on the right edge of the bar.
2019-01-11 00:12:24 -05:00
Brian Ashworth c0f92cb2fb swaybar: add status_padding command
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
2019-01-11 00:07:58 -05:00
Robinhuett 33d9de88ef swaylock: Add caps lock state to indicator
Implements customization for the indicator as proposed in #2788 with comments from #3367 in mind.
The default behaviour does not change exept for the caps lock text color.
2019-01-10 16:14:18 -05:00
Brian Ashworth 3d6440ec26 bar_cmd_bind: utilize mouse button helpers
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.

This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.

This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
2019-01-10 12:43:10 -05:00
Brian Ashworth aa1c838f97 seat_cmd_cursor: utilize mouse button helpers
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when
parsing mouse buttons for the `press` and `release` operations. All x11
buttons, button event names, and button event codes are supported.
For x11 axis buttons, `dispatch_cursor_axis` is used instead of
`dispatch_cursor_button`. However the `press`/`release` state is ignored
and the either axis event is processed. This also removes support for
`left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
2019-01-10 11:47:34 -05:00
Ryan Dwyer ed5aafd90b Refactor seat operations to use an interface
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.

The move_tiling_threshold operation has been merged into move_tiling.

The main logic for each operation is untouched aside from variable
renames.

The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
2019-01-10 22:04:42 +10:00
Brian Ashworth eefa6b1ad3 bind{code,sym}: utilize mouse button helpers
This modifies `bindcode` and `bindsym` to use `get_mouse_bindcode` and
`get_mouse_bindsym`, respectively, to parse mouse buttons. Additionally,
the `BINDING_MOUSE` type has been split into `BINDING_MOUSECODE` and
`BINDING_MOUSESYM` to match keys and allow for mouse bindcodes to be
used. Between the two commands, all button syms and codes should be
supported, including x11 axis buttons.
2019-01-09 11:29:04 -05:00
Brian Ashworth 6f6a9af60e Add helpers for improved mouse button parsing
The following helper functions have been added to aid with parsing mouse
buttons from a string:

1. `get_mouse_bindsym`: attempts to parse the string as an x11 button
(button[1-9]) or as an event name (ex BTN_LEFT or BTN_SIDE)
2. `get_mouse_bindcode`: attempts to parse the string as an event code
and validates that the event code is a button (starts with `BTN_`).
3. `get_mouse_button`: this is a conveniency function for callers that
do not care whether a bindsym or bindcode are used and attempts to parse
the string as a bindsym and then bindcode.

None of these functions are used in this commit. The sole purpose of
this commit is to make the larger set more granular and easier to
review/manipulate. There will be a series of commits following this one
that will modify any command which uses a mouse button to use these
helpers.
2019-01-09 11:29:04 -05:00
Brian Ashworth 4696f49ecc reload: reset input configs
This resets all input options to their defaults on reload. This also
fixes some debug log typos in `input_manager_libinput_config_pointer`.
2019-01-09 11:24:15 -05:00
Ian Fan d093c3ac55 swaybar: handle SNI signals better
This fixes a crash caused by callbacks not matching the right sender,
and frees old values later, before they are re-assigned.
2019-01-08 12:18:59 +00:00
emersion 140bc2dd5b
Merge pull request #3275 from ianyfan/remove-readline
Rewrite strip_whitespace and remove readline.c
2019-01-08 10:05:37 +01:00
Rouven Czerwinski fde900861a cursor: move unhide and timeout retrieval into separate functions
The unhide and timeout retrieval functions are needed in a later commit. No
functional changes.
2019-01-07 10:30:19 -05:00
Brian Ashworth 5bf4daf263 Implement tiling_drag_threshold
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
2019-01-02 23:33:33 +01:00
Ian Fan a82b8a3c14 Remove readline.c
All occurrences of read_line have been replaced by getline.
peek_line has been absorbed into detect_brace.
2019-01-01 09:01:25 +00:00
Ian Fan 967566e37f stringop.c: rewrite strip_whitespace 2019-01-01 09:01:24 +00:00
Ian Fan 9e31f5d79c swaybar: use KDE's SNI IconThemePath property 2018-12-31 20:40:18 +00:00
Ian Fan f33b5c5223 swaybar: do not create tray if hidden 2018-12-31 20:40:18 +00:00
Ian Fan 2fd41fe9c8 swaybar: set bar dirty on SNI event 2018-12-31 20:40:18 +00:00
Ian Fan 6becde0246 swaybar: implement mouse events for tray 2018-12-31 20:40:18 +00:00
Ian Fan fa2c5282c1 swaybar: implement tray rendering 2018-12-31 20:40:18 +00:00
Ian Fan 6b03c68775 swaybar: implement tray config 2018-12-31 20:40:18 +00:00
Ian Fan 74655f835a swaybar: add StatusNotifierItem to tray 2018-12-31 20:40:18 +00:00
Ian Fan e6cb55e2f8 swaybar: add StatusNotifierHost to tray 2018-12-31 20:40:18 +00:00
Ian Fan 746600e6ed swaybar: implement icon themes and lookup for tray 2018-12-31 20:40:18 +00:00
Ian Fan 02df3f67aa swaybar: add StatusNotifierWatcher to tray 2018-12-31 20:40:18 +00:00
Ian Fan 5f65f33989 swaybar: add tray interface 2018-12-31 20:40:18 +00:00
Ian Fan 598e950296 swaybar: remove old tray implementation 2018-12-31 20:40:18 +00:00
Brian Ashworth 4d88c95790 hide_cursor: change to a seat subcommand
This makes hide_cursor a seat subcommand, which allows for seat specific
timeouts.
2018-12-30 14:17:24 +01:00
Brian Ashworth 09bb71f650 Verify seat fallback settings on reload
This fixes an issue where on reload, all input devices that were added
via an implicit fallback to the default seat would be removed from the
default seat and applications would crash due to the seat having no
capabilities.

On reload, there is a query for a seat config with the fallback setting
set (it can either be true or false). If no such seat config exists, the
default seat is created (if needed) and has the implicit fallback true
applied to its seat config. This is the same procedure that occurs when
a new input is detected.
2018-12-30 14:12:36 +01:00
Brian Ashworth 3e8f548d1d Revamp seat configs
This makes seat configs work like output and input configs do. This also
adds support for wildcard seat configs. A seat config is still created
in the main seat command handler, but instead of creating a new one in
the subcommands and destroying the main seat command's instance, the
seat subcommands modify the main one. The seat config is then stored,
where it is merged appropriately. The seat config returned from
`store_seat_config` is then applied. When attempting to apply a wildcard
seat config, a seat specific config is queried for and if found, that is
used. Otherwise, the wildcard config is applied directly.

Additionally, instead of adding input devices to the default seat
directly when there is no seat configs, a seat config for the default
seat is created with only fallback set to true, which is more explicit.
It also fixes an issue where running a seat command at runtime (with no
seat config in the sway config), would result in all input devices being
removed from the default seat and leaving sway in an unusable state.

Also, instead of checking for any seat config, the search is for a seat
config with a fallback option seat. This makes it so if there are only
seat configs with fallback set to -1, the default seat is still created
since there is no explicit notion on what to do regarding fallbacks.
However, if there is even a single fallback 0, then the default seat is
not used as a fallback. This will be needed for seat subcommands like
hide_cursor where the user may only want to set that property without
effecting anything else.
2018-12-29 19:40:40 +01:00
Brian Ashworth ae8937b11a Add failure reply on IPC_SYNC
Since it was decided that sway will not support IPC_SYNC, just return
`{'success': false}` as a reply
2018-12-29 17:07:26 +01:00
Brian Ashworth 3248c823ed Split image_surface handling into own function 2018-12-25 13:31:56 +01:00
Brian Ashworth 5fca74a1f1 Implement hide_cursor <timeout> command
Allows the cursor to be hidden after a specified timeout in
milliseconds
2018-12-25 13:31:56 +01:00
Brian Ashworth a223030b70 Change mouse buttons to x11 map and libevdev names
This modifies the way mouse bindings are parsed. Instead of adding to
BTN_LEFT, which results in button numbers that may not be expected,
buttons will be parsed in one of the following ways:

1. `button[1-9]` will now map to their x11 equivalents. This is already
the case for bar bindings. This adds support for binding to axis events,
which was not possible in the previous approach.

2. Anything that starts with `BTN_` will be parsed as an event code name
using `libevdev_event_code_from_name`. This allows for any button to be
mapped to instead of limiting usage to the ones near BTN_LEFT. This also
adds a dependency on libevdev, but since libevdev is already a dependency
of libinput, this should be fine. If needed, this option can have dependency
guards added.

Binding changes:
- button1: BTN_LEFT -> BTN_LEFT
- button2: BTN_RIGHT -> BTN_MIDDLE
- button3: BTN_MIDDLE -> BTN_RIGHT
- button4: BTN_SIDE -> SWAY_SCROLL_UP
- button5: BTN_EXTRA -> SWAY_SCROLL_DOWN
- button6: BTN_FORWARD -> SWAY_SCROLL_LEFT
- button7: BTN_BACK -> SWAY_SCROLL_RIGHT
- button8: BTN_TASK -> BTN_SIDE
- button9: BTN_JOYSTICK -> BTN_EXTRA

Since the axis events need to be mapped to an event code, this uses the
following mappings to avoid any conflicts:
- SWAY_SCROLL_UP: KEY_MAX + 1
- SWAY_SCROLL_DOWN: KEY_MAX + 2
- SWAY_SCROLL_LEFT: KEY_MAX + 3
- SWAY_SCROLL_RIGHT: KEY_MAX + 4
2018-12-25 13:27:08 +01:00
Brian Ashworth 88d96bc41f Combine output_by_name and output_by_identifier
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
2018-12-20 19:55:29 +01:00
Brian Ashworth 35a82a8693 swaybar: fix cursor scale
This fixes a few issues with swaybar's cursor scaling:
1. The cursor scale is now changed when the output scale changes
2. The cursor scale is no longer bound by the max output scale when
swaybar is launched
3. Related to the previous item, the cursor is no longer tiny on low
scale outputs after the max output scale has changed

This also bumps up `wl_compositor` to version 4 to allow usage of
`wl_surface_damage_buffer`.
2018-12-15 09:26:50 +01:00
Brian Ashworth 1897edabba Rework default output configs
Default output configs were generated on reload to reset an output to
its default settings. The idea was that anything that was removed from
the config or changed at runtime and not in the config should be reset
on reload. Originally, they were created using the output name. Recently,
they were changed to use the output identifier. It turns out that there
are issues of shadowing with that solution as well. This should fix
those issues.

Instead of generating the default output configs on reload and storing
them in the output config list to merge on top of, they are now only
generated when retrieving the output config for an output during a
reload. This means that the default output configs are never stored
anywhere and just used as a base to merge unaltered user configs on top
of during a reload.

Starting with a blank output config, merges get applied in the following
order:
1. Default output config (only during a reload)
2. Wildcard config (only if neither output name or output identifier
exist)
3. Output name config
4. Output identifier config
2018-12-13 18:37:25 +01:00
Ian Fan 98c1e19466 list.c: rename free_flat_list to list_free_items_and_destroy 2018-12-09 01:15:38 +00:00
Ian Fan 19e831ed3d list.c: Remove list_foreach
Most occurrences have been replaced by `free_flat_list` which has been
moved from stringop.c to list.c. The rest have been replaced by for loops.
2018-12-09 00:37:50 +00:00
Hristo Venev 24e8ba048a Add relative coordinates in JSON for i3bar click events
Compatibility with i3 commit 161db6f17d734ac9deb0a20e81b78d4b2a92ce68.
2018-12-04 12:49:21 +02:00
Brian Ashworth 1bd8463481 Implement bar gaps
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
2018-11-28 11:24:14 -05:00
Brian Ashworth e5f90f25d7 Introduce a way to show config warnings in swaynag
Adds the function `config_add_swaynag_warning(char *fmt, ...)` so that
handlers can add warnings to the swaynag config log in a uniform way.
The formatting is identical to errors and include the line number, line,
and config path.

This also alters the background file access warning to use the function
and introduces a warning for duplicate bindings.
2018-11-28 11:09:01 -05:00
emersion b98563d2d7
Fix segfault when destroying unmapped child view 2018-11-28 14:08:20 +01:00
Ryan Dwyer f737854e30
Merge pull request #3199 from emersion/handle-subsurface-destroy
Handle destroyed subsurfaces
2018-11-28 20:46:22 +10:00
emersion c931a13af9
Merge pull request #3207 from RedSoxFan/swaynag-no-term-buttons
Implement swaynag -B/--button-no-terminal
2018-11-28 09:44:26 +01:00
Brian Ashworth 673da83260 Implement swaynag -B/--button-no-terminal
In `i3 4.16`, `i3-nagbar` introduces the flags `-B/--button-no-terminal`
to run the action directly instead of inside a terminal. This implements
the flags for swaynag for compatibility.

Since swaynag does not use an equivalent to `i3-sensible-terminal`, the
flags `-b/--button` only uses a terminal when the environment variable
`TERMINAL` is set, otherwise it acts the same as these new flags.
2018-11-27 23:34:51 -05:00
Brian Ashworth 5c6f3d7266 Change execute_command to return a list of results
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
2018-11-27 21:42:09 -05:00
emersion fc79b7c2d2
Handle destroyed subsurfaces
Damage subsurfaces when they are destroyed. Since subsurfaces don't have an
unmap event we need to do that on destroy.

We also don't want to keep a sway_view_child when the wlr_subsurface has been
destroyed.

Fixes https://github.com/swaywm/sway/issues/3197
2018-11-27 11:46:30 +01:00
Brian Ashworth e6562c8cd2 Implement title alignment
This adds support for `i3 4.16`'s ability to set the title alignment.
The command is `title_align left|center|right`.

When the title is on the right, marks are moved to the left. Otherwise,
they are on the right.
2018-11-25 22:08:58 -05:00
Florent de Lamotte 7555c7efdc Adding commands for configuring titlebar borders and padding 2018-11-22 10:30:04 +01:00
emersion bf7af9c690
Merge pull request #3083 from c-edw/feature/StripWorkspaceName
Implement strip_workspace_name.
2018-11-19 17:56:18 +01:00
emersion 311c7db7e3
Add xwayland command 2018-11-19 17:38:37 +01:00
Spencer Michaels 70bc4c3ab6 Add scroll factor config option. 2018-11-18 13:49:30 -05:00
emersion cad851805b
Use #if instead of #ifdef 2018-11-18 00:33:06 +01:00
Connor E 4bd46fb079 Implement strip_workspace_name. 2018-11-17 16:11:28 +00:00
Ryan Dwyer be9348d25c Move view {x,y,width,height} into container struct
This renames/moves the following properties:

* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
    * This is required to support placeholder containers as they don't
    have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
    * To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
    * The con prefix was there to give it contrast from the view
    properties, and is no longer useful.

The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
2018-11-17 21:29:42 +10:00
emersion 2afd930914
Use #if instead of #ifdef for WLR_HAS_* 2018-11-12 22:23:06 +01:00
Brian Ashworth 12876932a9 Allow multiple outputs for workspace output
`i3 4.16` allows users to list multiple outputs for a workspace and the
first available will be used. The syntax is as follows:
`workspace <workspace> output <outputs...>`

Additionally when the workspace is created, the outputs get added to the
output priority list in the order specified. This ensures that if a higher
output gets connected, the workspace will move to the higher output. This
works the same way as if the user had a workspace on an output, disconnected
the output, and then later reconnected the output.
2018-11-11 11:22:38 -05:00
Ryan Dwyer aad2f444f0
Merge pull request #3087 from RedSoxFan/side-gaps
Implement per side and per direction outer gaps
2018-11-08 22:41:14 +10:00
Brian Ashworth 9e8aa39530 Implement per side and per direction outer gaps
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`

`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.

Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.

Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
2018-11-07 22:44:11 -05:00
Brian Ashworth 6a42643784 gaps: remove duplicate inner gaps 2018-11-07 22:42:18 -05:00
Connor E 4a21981855 Add focus_follows_mouse always. (#3081)
* Add focus_follows_mouse_mode.

* Fail if focus_follows_mouse is invalid.

* Fix indentation.
2018-11-06 21:58:08 +01:00
Drew DeVault c18cd9dd03
Merge pull request #3021 from Snaipe/singlekey-binding-trigger
binding: match single-key bindings if no multi-key binding matched
2018-11-03 17:57:59 +01:00
Ryan Dwyer 9fc736f4e1 Move view marks properties to container struct
Like border properties, this will be needed to implement layout saving
and restoring.
2018-11-01 18:09:51 +10:00
Drew DeVault 480b03b734
Merge pull request #3040 from RyanDwyer/border-props-to-container
Move view border properties to container struct
2018-11-01 01:03:41 +01:00
Ryan Dwyer bf19f63a79 Wrap to fartherest output when running focus output
Also moves the `opposite_direction` function into `util.c` as it's used
in two places now.
2018-11-01 08:29:45 +10:00
Ryan Dwyer 528c7495bb Move view border properties to container struct
This will be needed to implement layout saving and restoring, as we need
to be able to configure borders on a placeholder container which has no
view.
2018-10-31 23:56:20 +10:00
madblobfish 1f23ec2d05 Revert "Add resolve_path() to utils"
This reverts commit c9694ee63d.
2018-10-31 13:04:08 +01:00
Ryan Dwyer 7be309710d Remove enum movement_direction
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.

As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
2018-10-30 23:27:49 +10:00
Franklin "Snaipe" Mathieu f8e83ee20a binding: match single-key bindings if no multi-key binding matched
This makes bindings more snappy when the user is typing faster than
his keycaps are releasing.

Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
2018-10-29 13:04:19 +00:00
Robinhuett 0a4cf4748d Use output identifier for workspace config 2018-10-27 15:56:06 +02:00
Ryan Dwyer 60a1d79de7 Rebase the cursor after applying transactions
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.

There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
2018-10-25 23:37:40 +10:00
Drew DeVault ea2497d35c
Merge pull request #2950 from emersion/presentation-time
Implement the presentation-time protocol
2018-10-25 15:31:47 +02:00
Drew DeVault 46fc4ba4e3
Merge pull request #2957 from RyanDwyer/rebase-cursor-after-map
Rebase the cursor after mapping a view
2018-10-24 15:45:47 +02:00
Ryan Dwyer 17bb39cd49 Add multiseat support to swaylock 2018-10-24 22:04:16 +10:00
Ryan Dwyer bdae625cb3 Rebase the cursor after mapping a view
I originally put the rebase at the end of view_map, but at this point
the view is still at its native size and will ignore the motion event if
it falls outside of its native size. The only way to do this properly is
to rebase the cursor later - either after sending the configure, after
the view commits with the new size, or after applying the transaction. I
chose to do it after applying the transaction for simplicity.

I then attempted to just call cursor_rebase after applying every
transaction, but this causes crashes when exiting sway (and possibly
other places) because cursor_rebase assumes the tree is in a valid
state.

So my chosen solution introduces transaction_commit_dirty_with_callback
which allows handle_map to register a callback which will run when the
transaction is applied.
2018-10-24 19:38:52 +10:00
Drew DeVault bdb176863c
Merge pull request #2933 from Snaipe/xwayland-window-properties
xwayland: populate window_properties in json for views
2018-10-24 01:13:15 +02:00
emersion a654ac1bd6
Implement the presentation-time protocol 2018-10-23 23:38:57 +02:00
Franklin "Snaipe" Mathieu 8fc9328334 xwayland: populate window_properties in json for views
window_properties is documented to contain a subset of the X11 properties
of a window (its title, class, instance, role, and transient ID). This
commit adds the missing json object from the get_tree output for
xwayland windows only.

This is a follow-up of #2911.

Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
2018-10-23 19:10:50 +01:00
Ian Fan 9227cb7d67 commands: replace EXPECTED_LESS_THAN with EXPECTED_AT_MOST
This makes it a bit more obvious what the expected number of arguments is.
2018-10-23 10:51:54 +01:00
Ian Fan 5364255f26 commands: remove EXPECTED_MORE_THAN
Its uses have been replaced with EXPECTED_AT_LEAST.
2018-10-23 10:17:58 +01:00
Ryan Dwyer 6deb726873 Fix crash when quitting a QT app on the wayland backend using menu
QT unmaps the view before destroying the popup. We destroyed the popup
in response to the view unmapping, but then we'd attempt to destroy it a
second time which caused a crash.

The patch removes the listener.

I tested it with GTK as well, and can confirm the popup is still being
destroyed.
2018-10-22 18:36:47 +10:00
Christian 989bddc765 Parse missing i3 window types
fixes the parsing part of #2906
2018-10-21 15:59:04 +02:00
Ryan Dwyer c5a6c37275 Make workspace back_and_forth seat-specific
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
2018-10-21 11:26:22 +10:00
Ryan Dwyer b9b1b0e566 Remove raise_floating directive
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.

There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
2018-10-20 17:51:32 +10:00
Ryan Dwyer c006717910 Minor refactor of input manager
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.

On a similar note:

* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.

Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.

Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
2018-10-20 13:11:43 +10:00
Ryan Dwyer 9ea71f292b Introduce cursor_rebase
This function "rebases" the cursor on top of whatever is underneath it,
without triggering any focus changes.
2018-10-19 22:47:54 +10:00
Ryan Dwyer 4d743b64d0 Fix logic used for mouse_warping output
Turns out we don't need to store the previous focus, and it should be
based on which output the cursor was in.
2018-10-19 22:28:02 +10:00
Drew DeVault 96e3686ae8
Merge pull request #2875 from RedSoxFan/input-device-bindings
cmd_bind{sym,code}: Implement per-device bindings
2018-10-19 14:00:03 +02:00
Ryan Dwyer a2fdac2c4b Consider cursor warp when switching workspaces
Fixes a regression introduced in
24a90e5d86.

consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
2018-10-19 08:00:13 +10:00
Brian Ashworth 2e637b7368 cmd_bind{sym,code}: Implement per-device bindings
bindsym --input-device=<identifier> ...
bindcode --input-device=<identifier> ...
2018-10-18 13:42:01 -04:00